Scribd
Upload
262 views1 page

TL WELD Series - 2

The TL-WELD is a thermocouple and fine wire welder designed for producing commercial-grade thermocouple junctions. It can weld wires up to 1.1mm in diameter and uses an argon gas shield for optimal welds. No special skills are needed to operate the TL-WELD, which can be controlled from the front panel or with a footswitch. It is suitable for applications requiring multipoint temperature sensing such as in test laboratories.

Uploaded by

vb corp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
262 views1 page

TL WELD Series - 2

The TL-WELD is a thermocouple and fine wire welder designed for producing commercial-grade thermocouple junctions. It can weld wires up to 1.1mm in diameter and uses an argon gas shield for optimal welds. No special skills are needed to operate the TL-WELD, which can be controlled from the front panel or with a footswitch. It is suitable for applications requiring multipoint temperature sensing such as in test laboratories.

Uploaded by

vb corp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Thermocouple and Fine Wire Welder

Make Quality Beaded Thermocouples  


TL-WELD

U Wire-Holding Pliers
and Lead
U Safety Glasses
U Magnifying Eyeglass
U Carbon Electrodes
U Spare 2 A Fuse
U Argon Hose
U Power Cord
U Footswitch for Greater
Ease of Use
U 120/220 Vac Selectable
TL-WELD. H
The TL-WELD is designed for
sensor manufacturers who produce
commercial-grade thermocouple
junctions, and for users of large
numbers of exposed junction
thermocouples, such as test and Please see
development laboratories where omega.com for
multipoint temperature sensing of thermocouple TL-WELD-PL
bare wire. pliers included.
test pieces is required. Shown smaller
than actual size.
No special skills are needed and
most people will be capable of
producing quality work with minimal
practice. The instrument can be
operated via the front panel or by
using the footswitch.
This model is suitable for welding
Beaded Thermocouples Only
wires up to 1.1 mm (0.043") in
diameter and has an argon gas
shield facility.
Electrical
A satisfactory thermocouple Power Supply:
junction is produced without using Standard: 110 to 120/
argon, but where argon is available 220 to 250 Vac selectable,
a momentary purge is automatically 50 to 60 Hz
triggered immediately prior to the
weld to give optimum weld integrity. Power Consumption:
Maximum 170 VA dropping to
20 VA during charging
Specifications
General
Energy Output: 0 to 60 joules To Order
Welding Capacity: Wires up to Model No. Description
1.1 mm (0.043") in diameter TL-WELD Thermocouple and fine wire welder
Duty Cycle: Minimum 5 to Accessory
10 welds/minute
Model No. Description
Mechanical TL-WELD-CAR Replacement carbon electrodes (package of 5)
Dimensions: TL-WELD-PL Spare insulated pliers for TL-WELD
220 W x 120 H x 250 mm D Comes complete with pliers.
(8.7 x 4.7 x 9.9") Ordering Example: TL-WELD, thermocouple and fine wire welder and TL-WELD-CAR, spare
Weight: 4 kg (8.8 lb) carbon electrodes.

H-10

You might also like