Scribd
Upload
430 views

GRP Pipe

The document provides equations for calculating maximum fluid velocity, minimum pipe diameter for water, and minimum pipe diameter for corrosive or erosive fluids. The equations consider factors such as fluid velocity, fluid density, flow rate, specific gravity, and pipe diameter. Conversion factors are also provided to convert between US and metric units for the calculations.

Uploaded by

zshehadeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
430 views

GRP Pipe

The document provides equations for calculating maximum fluid velocity, minimum pipe diameter for water, and minimum pipe diameter for corrosive or erosive fluids. The equations consider factors such as fluid velocity, fluid density, flow rate, specific gravity, and pipe diameter. Conversion factors are also provided to convert between US and metric units for the calculations.

Uploaded by

zshehadeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

GRP PIPE CALCULATION

Maximum Velocity

V = 48/ρ0.33 v = 37/ρo.33
Where: Where:
V = fluid velocity, ft/sec V = fluid velocity, d s e c
ρ = fluid density, lb/ft3 ρ = fluid density, kg/m3
= 62.4 lb/ft3 for water = 1,000 kg/m3 for water
Maximum Velocity for Corrosive or Erosive Fluids-‫الس‬#‫لفيبر ج‬##‫النابيبا‬# ‫المنة داخل ا‬##‫لسرعة ا‬##‫ا‬

6.13 V = 24/ρ0.33 ft/sec 1.88 v = 18.4/ρo.33


Where: Where:
V = fluid velocity, ft/sec V = fluid velocity,m/ s e c
ρ = fluid density, lb/ft3 ρ = fluid density, kg/m3
= 62.4 lb/ft3 for water = 1,000 kg/m3 for water

Minimum Pipe Diameter for Water

d = 0.73 [(Q)/(SG)]0.5/ρ0.33 inch d = 186 [(Q)/(SG)]0.5/ρ0.33


Minimum Pipe Diameter for Corrosive or Erosive Fluids

d = 1.03 [(Q)/(SG)]0.5/ρ0.33 inch d = 262 [(Q)/(SG)]0.5/ρ0.33

Where: Where:

d pipe inside
diameter, in. 14.82
inch
d pipe inside
diameter, mm.

Q = flow rate, gpm 3170 gpm Q = flow rate, L/sec

SG = specific gravity, 1 1.0 for water SG = specific gravity,


dimensionless dimensionless
62.4 lb/ft3 for
ρ = fluid density, lb/ft3 62.4 water ρ = fluid density, kg/m3

‫حساب قطر االنابيب الفيبر جالس تحت الضغط بمعلومية التصرف‬

d = 0.321 [(Q)/(SG)2]0.434 inch d = 27.1 [(Q)/(SG)2]0.434

Where: Where:

d pipe inside
diameter, in. 14.82 inch d pipe inside
diameter, mm.

3170
Q = flow rate, gpm gpm Q = flow rate, L/sec
SG = specific gravity, 1 1.0 for water SG = specific gravity,
dimensionless dimensionless
62.4 lb/ft3 for
62.4 water
ρ = fluid density, lb/ft3 ρ = fluid density, kg/m3
ON

37/ρo.33

-‫الس‬#‫لفيبر ج‬##‫النابيبا‬# ‫خل ا‬#‫المنة دا‬##‫لسرعة ا‬##‫ا‬

v = 18.4/ρo.33 m/ s e c

y,m/ s e c
y, kg/m3
or water

Water

86 [(Q)/(SG)]0.5/ρ0.33 mm

or Erosive Fluids

62 [(Q)/(SG)]0.5/ρ0.33 mm

379.15
mm
200 L/sec
1 1.0 for water
1,000 kg/m3
1000 for water

‫حساب قط‬

7.1 [(Q)/(SG)2]0.434 mm

270.16 mm

200
L/sec
1 1.0 for water

1,000 kg/m3
1000 for water

You might also like