Scribd
Upload
109 views1 page

SL L279 Fuel Injector Model Designation

Uploaded by

Elzo Freitas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views1 page

SL L279 Fuel Injector Model Designation

Uploaded by

Elzo Freitas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

652 Oliver Street

Williamsport, PA. 17701 U.S.A.


SERVICE
Telephone +1-877-839-7878 (U.S. and Canada)
Telephone +1-570-323-7222 (International)
Facsimile +1-570-327-7101
Email [email protected]
www.lycoming.com
LETTER
Service Letter No. L279
October 10, 2019
TO: All Owners and Operators of Lycoming Piston Aircraft Engines
SUBJECT: Lycoming model designation for fuel injectors.

NOTICE: Incomplete review of all the information in this document can cause errors. Read the entire
Service Letter to make sure you have a complete understanding of the requirements.
Lycoming Engines’ naming convention for fuel injector model designations is identified in the
following table. The naming convention is intended to describe the general feature set specification of the
fuel injector and does not constitute the complete specification of the product.
For example: Fuel injector Lycoming Part Number 61M26404 has the new LFR Model Designation
“LFR-NNSH10”, meaning the fuel injector is a non-automatic mixture, non-enrichment, small regulator,
hose interface, with a size 10 bore.
Beginning in October 2019, fuel injectors shipped from Lycoming with engines or spare parts orders
will have these new model numbers displayed on the fuel injector data plate along with the existing
Lycoming part number. The Lycoming part numbers remain unchanged and customers should continue to
refer to the latest revision of Service Instruction 1532 for injector and engine applicability.

Prefix LFR= Lycoming Fuel Servo with In-Line Regulator


Fuel A= Automatic Mixture
Management N= Non-Automatic Mixture
Enrichment N= Non-Enrichment
Type M= Mechanical Enrichment w/Two Hole Jet
F= Fuel Head Enrichment
Airflow S= Small Regulator
Management L= Large Regulator
I= Integrated Regulator
Unique S= Standard Configuration (Flanged)
Configuration H= Hose Interface
M= Mirror Image Body
C= Clicker Type Enrichment
Bore Size 5, 7, 10 –size designation

ISSUED REVISED PAGE NO. REVISION


MO DAY YEAR MO DAY YEAR
1 of 1 -----
10 10 19 -- -- --
©2019 Avco Corporation. All Rights Reserved.
Lycoming Engines is a division of Avco Corporation.

You might also like