Scribd
Upload
880 views

Syllabus Solidworks

The document outlines the M-Scheme for the course COMPUTER AIDED MACHINE DRAWING – II PRACTICAL. The course is divided into 5 units covering 2D drawing, solid modeling, assembly modeling, drafting, and finite element analysis. Students will complete solid modeling exercises to create parts like a clutch lever. They will also do assembly modeling exercises and finite element analysis simulations. The exam will evaluate students on solid modeling, assembly modeling, drafting, meshing and loading finite element models, and simulations over 2 hours with a maximum of 75 marks.

Uploaded by

ganeshblogs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
880 views

Syllabus Solidworks

The document outlines the M-Scheme for the course COMPUTER AIDED MACHINE DRAWING – II PRACTICAL. The course is divided into 5 units covering 2D drawing, solid modeling, assembly modeling, drafting, and finite element analysis. Students will complete solid modeling exercises to create parts like a clutch lever. They will also do assembly modeling exercises and finite element analysis simulations. The exam will evaluate students on solid modeling, assembly modeling, drafting, meshing and loading finite element models, and simulations over 2 hours with a maximum of 75 marks.

Uploaded by

ganeshblogs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

M-SCHEME

(Implements from the Academic year 2015-2016


onwards)

22064 -COMPUTER AIDED MACHINE DRAWING – II PRACTICAL

Course Name : DIPLOMA IN MECHANICAL ENGINEERING


Course Code : 1020
Subject Code : 22064
Semester : VI
Subject Title : COMPUTER AIDED MACHINE DRAWING – II PRACTICAL

UNIT NAME OF THE TOPIC Hours


I 2D DRAWING 12 Hrs
Sketcher workbench – Understanding the software environment – -
Coordinate systems - Unit definitions – Drawing aids settings – Creating
2D objects using commands – Points, Line, Circle, Arc, Polygon, Ellipse,
Splines, Text – Display tools – Zoom, Pan, Hide/show. Editing and
modify commands –trim, extend, fillet, chamfer, mirror, rotate, copy,
scale - offset, move, delete – making constraints.
II SOLID MODELING 14 Hrs
Axes system – working planes – extrude – revolve – sweep – draft -
holes – fillets – chamfers - shell – Rib - Editing of 3D objects – copy –
move –rotate –mirror –scale – reorder – reroute – modifying dimensions.

III ASSEMBLY MODELING 21 Hrs


Bottom-up approach and Top-down approaches - Knuckle joint, Screw
jack, Universal coupling, and Plummer block – simple working machine
assemblies.
IV DRAFTING MODULE 12 Hrs
Sectional views – types – generating drawing views – editing and
modifying the drawing views, creating sectional views –representation of
cutting plane – dimensioning, drafting abbreviations, title block, bill of
materials.
V FINITE ELEMENT ANALYSIS 21 Hrs
Introduction – Discretization of domain – basic elements - meshing –
applying boundary conditions – Loads - simple structural problems –
1Dimensional only – thermal distribution problems –1D only – Fluid flow
analysis (using Plastic Advisor) – simulation -result analysis

List of Experiments:

Part A. Solid Modeling

1. Create the model of Clutch Lever


2. Create the model of Clamp Stop
3. Create the model of Vice Jaw
4. Create the model of Soap Case
5. Create the mode of Angle Flange
6. Create an assembly of Blower
7. Create an assembly of Press Tool
8. Create an assembly of Radial Engine with five cylinders

Part B. Finite Element Analysis

9. Simulate a simple cantilever beam with point load


10. Simulate a simply supported beam with point load
11. Simulate a simple plate subjected to thermal load

Reference books:

1) CATIA for Engineers & Designers – Prof. Sham Tickoo, Dreamtech, NewDelhi.
2) PRO/E WildFire for Engineers & Designers – Prof. Sham Tickoo, Dreamtech, NewDelhi.
3) SolidEdge for Engineers & Designers – Prof. Sham Tickoo, Dreamtech, NewDelhi.
4) AutoCAD 2005 for Engineers & Designers – Prof. Sham Tickoo, Dreamtech, NewDelhi.
5) Finite Element Analysis – S.S.Rao

MODEL QUESTION 22064 (L1 – SCHEME)

COMPUTER AIDED MACHINE DRAWING – II PRACTICAL

Exercises Duration Max. Marks

Part A. Solid Modeling 2 Hrs 40

Part Modeling 20

Assembly Modeling 10

Drafting 10

B. Finite Element Analysis 1 Hrs 25

Meshing, & loading 20

Simulation 10

Viva-voce 05

TOTAL 75

You might also like