Scribd
Upload
105 views

Fabrication Methods Engineer

This role description outlines the responsibilities of a Fabrication Methods Engineer which includes developing fabrication procedures and structural integrity calculations for lifting and handling components during construction. Key tasks involve supporting yard erection activities, preparing fabrication and construction plans, defining transport and lifting operations, and ensuring safety and interface with other construction roles and authorities.

Uploaded by

haydarburedah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
105 views

Fabrication Methods Engineer

This role description outlines the responsibilities of a Fabrication Methods Engineer which includes developing fabrication procedures and structural integrity calculations for lifting and handling components during construction. Key tasks involve supporting yard erection activities, preparing fabrication and construction plans, defining transport and lifting operations, and ensuring safety and interface with other construction roles and authorities.

Uploaded by

haydarburedah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Role Description

Mission
▪ Develop fabrication procedures, study and define operations for structural components integrity in temporary intermediate
conditions like lifting and handling of subassemblies or load out, develop and issue calculations and procedure for lifting,
weighing, handling, load-out and ballasting
▪ Support yard erection activities providing assistance as needed

Tasks
▪ Provide support during the bidding and project start up phases in the definition of most appropriate erection methods /
sequences and layout in the construction areas
▪ Participate to Detail Engineering Phase for Construction re lated issues
▪ Prepare the Fabrication plan and identifies the planning issues in terms of field critical operations
▪ Partecipate to prepare the erection / construction sequence / method statement
▪ Define and finalize systems de tails for any type of transport / transfer inside and out side the yard
▪ Define and finalize systems details, structural verifications and analysis for every lifting operation, prepare and issue of
calculation reports
▪ Define and prepare the subcontractor scope of work for structural studies related issue
▪ Study, define the method procedures, dedicated tools and equipment of the critical operations like Heavy lifts, Roll-ups,
Weighing and Load-out
▪ Prepare and issue the procedures for Heavy lifts, Roll-ups, Weighing, Load-out
▪ Participate in critical operations like Heavy lifts, Roll-ups, Weighing and Load-out
▪ Define, design and detail, according to the certification body requirements, barge selection, marine transport conditions,
grillage and seafastening
▪ Ensure the interface with the certification authorities
▪ Ensure the interfaces with the Construction team (HSE coordinator, Quality Control coordinator, Prefabrication and Erection
functions,) and assist it as needed
▪ Partecipate to prepare the HSE Plan for every critical operations like Heavy lifts, Roll-ups, Weighing and Load-out
▪ Ensure the interfaces with the Client Engineering / Methods department and with the Head Office Engineering department
▪ Check the conformity and congruence of technical documentation received
from Head Office and Clients making it available to the Construction / Fabrication team
▪ Analyse the technical aspects of the feasibility of the construction works
providing information on the actual on-site availability of faclities, tools, documents, materials, etc.

Role: 433003-Fabrication Methods Engineer– Effective from 01/04/2019


Seniority: L1 L2 L3 L4
Area: Constr., Instal., Comm. & Ops.
Family: 4330_Fabrication Management

For further details, please refer to Criteria "Professional Role System" (Doc. No. CR_GR-GROUP-HR-PCE-001-E)
Page 2 of 6

You might also like