PRODUCT DATASHEET

APXVBLL15X-C-I20

RF X-TREMEŒTriple Band Antenna, 694-2690MHz, 65deg, 14-18.2dBi, 1.4m, 2-15/2-12deg,

Internal RET

This antenna is an ideal choice for triple band site upgrades for high traffic areas. It can be used
for multiple bands such as LTE 700, Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and LTE 2.6.

FEATURES / BENEFITS
Triple band cross-polarized with 3 arrays (6 ports), 1x694-960 / 2x1695-2690
Ultra-broadband design from LTE 700 to LTE 2600
Variable electrical downtilt ³provides enhanced precision in controlling intercell interference
The tilt is infield adjustable 2-15 deg (low band) and 2-12 deg (high band) on each cross
polarized antennas
Easy manual overdrive ³streamlines installation and ensures ease-of-use
Integrated RET serial numbers available on antenna radome ³eases on-site commissioning
and secures remote mapping from OMC
Enable MiMo 4x4 or 4-way RX diversity ³Ideal solution for LTE advance
High suppression of upper sidelobes ³reduces cell interference
Dual polarization ³triple band version
Design incorporates low windload and low weight ³minimizes tower loading
Quick and easy to install ³reduces installation time and costs
High reliability ³designed to last in a tower top environment

Technical Features
ELECTRICAL SPECIFICATIONS
Frequency Range MHz 694-806 790-862 880-960 1710-1880 1850-1990 1920-2170 2300-2400 2500-2690

Gain, Low Tilt dBi 13.8(11.7) 14.0(11.9) 14.4(12.3) 16.4(14.3) 17.0(14.9) 17.4(15.3) 16.8(14.7) 16.8(14.7)

Gain, Mid Tilt dBi 13.6(11.5) 14.0(11.9) 14.3(12.2) 16.8(14.7) 17.3(15.2) 17.7(15.6) 17.0(14.9) 17.8(15.7)

Gain, High Tilt dBi 13.6(11.5) 14.0(11.9) 13.7(11.6) 16.8(14.7) 17.4(15.3) 17.4(15.3) 16.7(14.6) 17.4(15.3)

Horizontal Beamwidth deg 73 69 67 68 65 60 65 67

Vertical Beamwidth deg 19.2 16.6 15.4 7.7 7.2 6.8 6.1 5.4

Electrical Downtilt Range deg 2-15 2-15 2-15 2-12 2-12 2-12 2-12 2-12

1st Upper Sidelobe Suppression dB 17 Typical

Front-To-Back Ratio dB 28 28 28 26 26 26 26 26

Polarization Dual pol +/-45°

VSWR < 1.5:1
Isolation between Ports dB >26
3rd Order IMP @ 2 x 43 dBm dBc >150
Impedance Ohms 50.0
Maximum Power Input W 500.0 500.0 500.0 300.0 300.0 300.0 300.0 300.0

MECHANICAL SPECIFICATIONS
Lightning Protection Direct Ground
Connector Type/Location (6) 7-16 Long Neck Female/Bottom
Dimensions - HxWxD mm (in) 1390 x 340 x 200 (54.8 x 13.4 x 7.9)
Weight w/o Mtg Hardware kg (lb) 23 (50.7)
Survival/Rated Wind Speed km/h (mph] 240 (150) / 150 (93.2)
Applied Wind Load Standard DIN 1055-4
Wind Load @ Rated Wind, Front N (lbf) 420 (95) 420
Wind Load @ Rated Wind, Side N (lbf) 245 (55)
Wind Load @ Rated Wind, Rear N (lbf) 401 (90)
TESTING AND ENVIRONMENTAL
Operation temperature °C (°F) -40 to 60 (-40 to 140 )
MATERIAL
Radome Material/Color ASA/Light Grey RAL7035
Mounting Hardware Material Diecasted Aluminum and Stainless Steel
Radiating Element Material Aluminum and Brass
Reflector Material Aluminum
ORDERING INFORMATION

APXVBLL15X-C-I20 REV: B REV DATE: 30.11.2015 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2
PRODUCT DATASHEET
APXVBLL15X-C-I20

RF X-TREMEŒTriple Band Antenna, 694-2690MHz, 65deg, 14-18.2dBi, 1.4m, 2-15/2-12deg,

Internal RET
Shipping Weight kg (lb) 30 (66.1)
Packing Dimensions mm (in) 1542 x 444 x 413 (60.7 x 17.5 x 16.3)
Mounting Hardware APM40-2
Mounting Pipe Diameter mm (in) 60 - 120 (2.36 - 4.72 )
Mounting Hardware Weight kg (lb) 3.4 (7.5)

Antenna End Plate Antenna Array Antenna Drawing

External Document Links Notes

APM40 Series Datasheet Available Configurations
APM40 Series Installation Instructions APXVBLL15X-C-I20 ²Pre-commissioned, integrated ACUs included ²Weight 23 kg, 50.7 lb
For additional mounting information please click "External Document Links" below.

APXVBLL15X-C-I20 REV: B REV DATE: 30.11.2015 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2