Scribd
Upload
107 views5 pages

Timber Structure Calculations: Code: Analysis Type

This document summarizes timber structure calculations for code compliance. It analyzes two beam sections - a 6x20 beam and 12x14 beam - under governing load case 4. It determines stresses, compares values to design strengths, and confirms the sections meet requirements for compression, tension and buckling with safety factors above 1.

Uploaded by

hamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
107 views5 pages

Timber Structure Calculations: Code: Analysis Type

This document summarizes timber structure calculations for code compliance. It analyzes two beam sections - a 6x20 beam and 12x14 beam - under governing load case 4. It determines stresses, compares values to design strengths, and confirms the sections meet requirements for compression, tension and buckling with safety factors above 1.

Uploaded by

hamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 5

TIMBER STRUCTURE CALCULATIONS

--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE: ANSI/AWC NDS-2012 LRFD
ANALYSIS TYPE: Code Group Design
--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE GROUP: 1 Tie Beams
MEMBER: 49 Beam_49 POINT: 1 COORDINATE: x = 0.00 L = 0.00 ft
--------------------------------------------------------------------------------------------------------------------------------------------
---
LOADS:
Governing Load Case: 4 ULS /5/ 1*1.20 + 2*1.20 + 3*1.60
--------------------------------------------------------------------------------------------------------------------------------------------
---
MATERIAL: TIMBER
Structural Glued Laminated Softwood Timber - Tab.5A
Ft=1.60 ksi Fc=2.61 ksi
Fby=2.61 ksi Fvy=0.29 ksi Fcpy=0.70 ksi Ey=1305.34 ksi
Eminy=870.23 ksi
Fbz=2.61 ksi Fvz=0.29 ksi Fcpz=0.70 ksi Ez=1305.34 ksi
Eminz=870.23 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---

SECTION PARAMETERS: BEAM 6x20


d=19.50 in
b=5.50 in Ay=71.533 in2 Az=71.533 in2 A=107.300 in2
Iy=3398.000 in4 Iz=270.400 in4 Ix=889.221 in4
Sy=348.513 in3 Sz=98.327 in3
--------------------------------------------------------------------------------------------------------------------------------------------
---
MEMBER PARAMETERS:

BUCKLING Y BUCKLING Z LT BUCKLING


lu = 24.07 ft
leb = 44.11 ft
RB = 18.47
CL = 0.87
FcEy = INF ksi FcEz = INF ksi FbE = 4.58 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
INTERNAL FORCES AND ACTUAL STRESSES:
N = 5.55 kip My = -87.56 kip*ft Mz = 0.02 kip*ft Vy = 20.26 kip Vz = 0.00 kip
fc = 0.05 ksi fby = -3.01 ksi fbz = 0.00 ksi fvy = 0.28 ksi fvz = 0.00 ksi
Mx = 0.05 kip*ft fvty = 0.00 ksi fvtz = 0.00 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
DESIGN WOOD STRENGHTS:
Fc' = Fc(2.61)*CM(1.00)*Ct(1.00)*KF(2.40)*Fi(0.90)*Lam(0.70) = 3.95 ksi
Fby' = Fby(2.61)*CM(1.00)*Ct(1.00)*CL(0.87)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.43 ksi
Fbz' = Fbz(2.61)*CM(1.00)*Ct(1.00)*Cfu(1.09)*KF(2.54)*Fi(0.85)*Lam(0.70) = 4.30 ksi
Fvy' = Fvy(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Fvz' = Fvz(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Eminy' = Eminy(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
Eminz' = Eminz(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
RESULTS:
(fc/Fc')^2 + fby/(Fby'*(1-fc/FcEy) + fbz/(Fbz'*(1-fc/FcEz-(fby/FbE)^2) = 0.88 < 1.00 [3.9-3] OK!
fc/FcEz + (fby/FbE)^2 = 0.43 < 1.00 [3.9-4] OK!,
(fvy + 3/2*fvty)/Fvy' = 0.66 < 1.00 [3.4.1] OK!, (fvz + 3/2*fvtz)/Fvz' = 0.01 < 1.00 [3.4.1] OK!
Rb = 18.47 < 50.00 STABLE
--------------------------------------------------------------------------------------------------------------------------------------------
---
Section OK !!!

TIMBER STRUCTURE CALCULATIONS


--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE: ANSI/AWC NDS-2012 LRFD
ANALYSIS TYPE: Code Group Design
--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE GROUP: 1 Tie Beams
MEMBER: 49 Beam_49 POINT: 1 COORDINATE: x = 0.00 L = 0.00 ft
--------------------------------------------------------------------------------------------------------------------------------------------
---
LOADS:
Governing Load Case: 4 ULS /5/ 1*1.20 + 2*1.20 + 3*1.60
--------------------------------------------------------------------------------------------------------------------------------------------
---
MATERIAL: TIMBER
Structural Glued Laminated Softwood Timber - Tab.5A
Ft=1.60 ksi Fc=2.61 ksi
Fby=2.61 ksi Fvy=0.29 ksi Fcpy=0.70 ksi Ey=1305.34 ksi
Eminy=870.23 ksi
Fbz=2.61 ksi Fvz=0.29 ksi Fcpz=0.70 ksi Ez=1305.34 ksi
Eminz=870.23 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---

SECTION PARAMETERS: TMBR 12x14


d=13.50 in
b=11.50 in Ay=103.533 in2 Az=103.533 in2 A=155.300 in2
Iy=2358.000 in4 Iz=1711.000 in4 Ix=3348.489 in4
Sy=349.333 in3 Sz=297.565 in3
--------------------------------------------------------------------------------------------------------------------------------------------
---
MEMBER PARAMETERS:

BUCKLING Y BUCKLING Z LT BUCKLING


lu = 24.07 ft
leb = 42.61 ft
RB = 7.22
CL = 0.99
FcEy = INF ksi FcEz = INF ksi FbE = 29.93 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
INTERNAL FORCES AND ACTUAL STRESSES:
N = 5.55 kip My = -87.56 kip*ft Mz = 0.02 kip*ft Vy = 20.26 kip Vz = 0.00 kip
fc = 0.04 ksi fby = -3.01 ksi fbz = 0.00 ksi fvy = 0.20 ksi fvz = 0.00 ksi
Mx = 0.05 kip*ft fvty = 0.00 ksi fvtz = 0.00 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
DESIGN WOOD STRENGHTS:
Fc' = Fc(2.61)*CM(1.00)*Ct(1.00)*KF(2.40)*Fi(0.90)*Lam(0.70) = 3.95 ksi
Fby' = Fby(2.61)*CM(1.00)*Ct(1.00)*CL(0.99)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.92 ksi
Fbz' = Fbz(2.61)*CM(1.00)*Ct(1.00)*Cfu(1.00)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.96 ksi
Fvy' = Fvy(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Fvz' = Fvz(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Eminy' = Eminy(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
Eminz' = Eminz(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
RESULTS:
(fc/Fc')^2 + fby/(Fby'*(1-fc/FcEy) + fbz/(Fbz'*(1-fc/FcEz-(fby/FbE)^2) = 0.77 < 1.00 [3.9-3] OK!
fc/FcEz + (fby/FbE)^2 = 0.01 < 1.00 [3.9-4] OK!,
(fvy + 3/2*fvty)/Fvy' = 0.45 < 1.00 [3.4.1] OK!, (fvz + 3/2*fvtz)/Fvz' = 0.00 < 1.00 [3.4.1] OK!
Rb = 7.22 < 50.00 STABLE
--------------------------------------------------------------------------------------------------------------------------------------------
---
Section OK !!!

TIMBER STRUCTURE CALCULATIONS


--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE: ANSI/AWC NDS-2012 LRFD
ANALYSIS TYPE: Code Group Design
--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE GROUP: 2 Long Tie Beams
MEMBER: 49 Beam_49 POINT: 1 COORDINATE: x = 0.00 L = 0.00 ft
--------------------------------------------------------------------------------------------------------------------------------------------
---
LOADS:
Governing Load Case: 4 ULS /5/ 1*1.20 + 2*1.20 + 3*1.60
--------------------------------------------------------------------------------------------------------------------------------------------
---
MATERIAL: TIMBER
Structural Glued Laminated Softwood Timber - Tab.5A
Ft=1.60 ksi Fc=2.61 ksi
Fby=2.61 ksi Fvy=0.29 ksi Fcpy=0.70 ksi Ey=1305.34 ksi
Eminy=870.23 ksi
Fbz=2.61 ksi Fvz=0.29 ksi Fcpz=0.70 ksi Ez=1305.34 ksi
Eminz=870.23 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---

SECTION PARAMETERS: BEAM 6x20


d=19.50 in
b=5.50 in Ay=71.533 in2 Az=71.533 in2 A=107.300 in2
Iy=3398.000 in4 Iz=270.400 in4 Ix=889.221 in4
Sy=348.513 in3 Sz=98.327 in3
--------------------------------------------------------------------------------------------------------------------------------------------
---
MEMBER PARAMETERS:

BUCKLING Y BUCKLING Z LT BUCKLING


lu = 24.07 ft
leb = 44.11 ft
RB = 18.47
CL = 0.87
FcEy = INF ksi FcEz = INF ksi FbE = 4.58 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
INTERNAL FORCES AND ACTUAL STRESSES:
N = 5.55 kip My = -87.56 kip*ft Mz = 0.02 kip*ft Vy = 20.26 kip Vz = 0.00 kip
fc = 0.05 ksi fby = -3.01 ksi fbz = 0.00 ksi fvy = 0.28 ksi fvz = 0.00 ksi
Mx = 0.05 kip*ft fvty = 0.00 ksi fvtz = 0.00 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
DESIGN WOOD STRENGHTS:
Fc' = Fc(2.61)*CM(1.00)*Ct(1.00)*KF(2.40)*Fi(0.90)*Lam(0.70) = 3.95 ksi
Fby' = Fby(2.61)*CM(1.00)*Ct(1.00)*CL(0.87)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.43 ksi
Fbz' = Fbz(2.61)*CM(1.00)*Ct(1.00)*Cfu(1.09)*KF(2.54)*Fi(0.85)*Lam(0.70) = 4.30 ksi
Fvy' = Fvy(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Fvz' = Fvz(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Eminy' = Eminy(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
Eminz' = Eminz(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
RESULTS:
(fc/Fc')^2 + fby/(Fby'*(1-fc/FcEy) + fbz/(Fbz'*(1-fc/FcEz-(fby/FbE)^2) = 0.88 < 1.00 [3.9-3] OK!
fc/FcEz + (fby/FbE)^2 = 0.43 < 1.00 [3.9-4] OK!,
(fvy + 3/2*fvty)/Fvy' = 0.66 < 1.00 [3.4.1] OK!, (fvz + 3/2*fvtz)/Fvz' = 0.01 < 1.00 [3.4.1] OK!
Rb = 18.47 < 50.00 STABLE
--------------------------------------------------------------------------------------------------------------------------------------------
---
Section OK !!!

TIMBER STRUCTURE CALCULATIONS


--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE: ANSI/AWC NDS-2012 LRFD
ANALYSIS TYPE: Code Group Design
--------------------------------------------------------------------------------------------------------------------------------------------
---
CODE GROUP: 2 Long Tie Beams
MEMBER: 49 Beam_49 POINT: 1 COORDINATE: x = 0.00 L = 0.00 ft
--------------------------------------------------------------------------------------------------------------------------------------------
---
LOADS:
Governing Load Case: 4 ULS /5/ 1*1.20 + 2*1.20 + 3*1.60
--------------------------------------------------------------------------------------------------------------------------------------------
---
MATERIAL: TIMBER
Structural Glued Laminated Softwood Timber - Tab.5A
Ft=1.60 ksi Fc=2.61 ksi
Fby=2.61 ksi Fvy=0.29 ksi Fcpy=0.70 ksi Ey=1305.34 ksi
Eminy=870.23 ksi
Fbz=2.61 ksi Fvz=0.29 ksi Fcpz=0.70 ksi Ez=1305.34 ksi
Eminz=870.23 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---

SECTION PARAMETERS: TMBR 12x14


d=13.50 in
b=11.50 in Ay=103.533 in2 Az=103.533 in2 A=155.300 in2
Iy=2358.000 in4 Iz=1711.000 in4 Ix=3348.489 in4
Sy=349.333 in3 Sz=297.565 in3
--------------------------------------------------------------------------------------------------------------------------------------------
---
MEMBER PARAMETERS:

BUCKLING Y BUCKLING Z LT BUCKLING


lu = 24.07 ft
leb = 42.61 ft
RB = 7.22
CL = 0.99
FcEy = INF ksi FcEz = INF ksi FbE = 29.93 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
INTERNAL FORCES AND ACTUAL STRESSES:
N = 5.55 kip My = -87.56 kip*ft Mz = 0.02 kip*ft Vy = 20.26 kip Vz = 0.00 kip
fc = 0.04 ksi fby = -3.01 ksi fbz = 0.00 ksi fvy = 0.20 ksi fvz = 0.00 ksi
Mx = 0.05 kip*ft fvty = 0.00 ksi fvtz = 0.00 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
DESIGN WOOD STRENGHTS:
Fc' = Fc(2.61)*CM(1.00)*Ct(1.00)*KF(2.40)*Fi(0.90)*Lam(0.70) = 3.95 ksi
Fby' = Fby(2.61)*CM(1.00)*Ct(1.00)*CL(0.99)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.92 ksi
Fbz' = Fbz(2.61)*CM(1.00)*Ct(1.00)*Cfu(1.00)*KF(2.54)*Fi(0.85)*Lam(0.70) = 3.96 ksi
Fvy' = Fvy(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Fvz' = Fvz(0.29)*CM(1.00)*Ct(1.00)*Cvr(1.00)*KF(2.88)*Fi(0.75)*Lam(0.70) = 0.44 ksi
Eminy' = Eminy(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
Eminz' = Eminz(870.23)*CM(1.00)*Ct(1.00)*KF(1.76)*Fi(0.85) = 1301.86 ksi
--------------------------------------------------------------------------------------------------------------------------------------------
---
RESULTS:
(fc/Fc')^2 + fby/(Fby'*(1-fc/FcEy) + fbz/(Fbz'*(1-fc/FcEz-(fby/FbE)^2) = 0.77 < 1.00 [3.9-3] OK!
fc/FcEz + (fby/FbE)^2 = 0.01 < 1.00 [3.9-4] OK!,
(fvy + 3/2*fvty)/Fvy' = 0.45 < 1.00 [3.4.1] OK!, (fvz + 3/2*fvtz)/Fvz' = 0.00 < 1.00 [3.4.1] OK!
Rb = 7.22 < 50.00 STABLE
--------------------------------------------------------------------------------------------------------------------------------------------
---
Section OK !!!

You might also like