Scribd
Upload
1K views

Electronic Control Module ADEM3

The document provides a diagram and description of the connectors and components in an electronic control module (ECM) system. The ECM, labeled ADEM3, connects to various sensors, relays, and modules through 23 numbered connectors (J1/P1 through J23). The connectors provide interfaces for detonation sensors, fuel control relay, starter motor relay, prelube relay, fuel metering valve, optional control panel, and a service tool. The system also includes a 6 amp and 16 amp circuit breaker and connectors to a gauge panel and customer connector.

Uploaded by

Laiq
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Electronic Control Module ADEM3

The document provides a diagram and description of the connectors and components in an electronic control module (ECM) system. The ECM, labeled ADEM3, connects to various sensors, relays, and modules through 23 numbered connectors (J1/P1 through J23). The connectors provide interfaces for detonation sensors, fuel control relay, starter motor relay, prelube relay, fuel metering valve, optional control panel, and a service tool. The system also includes a 6 amp and 16 amp circuit breaker and connectors to a gauge panel and customer connector.

Uploaded by

Laiq
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ground J2/P2 J1/P1 J16/P16

Electronic Control Module


(ECM) ADEM3
J15/P15

P14

J13/P13

J12/P12

J11/P11

J10/P10

P19
J23 6 Amp 16 Amp J15/P15 J7 J9/P9

Electronic Control Module Connector reference (ECM) ADEM3


J1/P1 Connectors for the ECM 6 Amp circuit breaker
J2/P2 ECM connectors 16 Amp circuit breaker
J11/P11 Connectors for the detonation sensors J7 Connector (if equipped)
J13/P13 Terminal box’s connectors for the fuel control relay P19 Connector for the gauge panel
J14/P14 Terminal box’s connectors for the starter motor relay’s circuit J9 Connector for the customer
J15/P15 Terminal box’s connectors for the Prelube relay J23 Connector for the service tool
J16/P16 Connectors for the fuel metering valve J9/P9 Customer connector (if equipped)
J19/P19 Connector for the optional control panel J15/P5 Connectors for the ITSM
P5 Connector for the integrated temperature sensing module

Prepared By Laiq Uz Zaman


1
Prepared By Laiq Uz Zaman
2

You might also like