Scribd
Upload
48 views3 pages

E1PRI Interface Specifications

This document provides specifications for various cable types used to connect the E1/PRI interface on a MAX unit to remote devices. It details the pinouts and part numbers for straight-through and crossover cables between RJ-48C, DA-15, and BNC connectors. It also lists the transmit and receive pin assignments for the RJ-48C sockets on the MAX unit's E1/PRI ports.

Uploaded by

adamimansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views3 pages

E1PRI Interface Specifications

This document provides specifications for various cable types used to connect the E1/PRI interface on a MAX unit to remote devices. It details the pinouts and part numbers for straight-through and crossover cables between RJ-48C, DA-15, and BNC connectors. It also lists the transmit and receive pin assignments for the RJ-48C sockets on the MAX unit's E1/PRI ports.

Uploaded by

adamimansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Thursday, April 2, 2020 12:50 PM

E1/PRI interface specifications


The MAX unit's E1/PRI interface has cabling and port specifications. During loss of power or whenever the MAX restarts, a relay closure returns the E1/PRI signal to the WAN.
That is, the E1/PRI line is looped back. However, if you configure the MAX for framing-compatible drop-and-insert functionality, all channels of line #1 are passed to line #2. Note
that line #1 and line #2 of a MAX Net/E1 expansion module always loop back upon loss of power, regardless of how they are configured.
E1/PRI cable specifications
The WAN interface cables and plugs described in this section are available for the MAX unit's WAN interfaces. Use only the cable specifically constructed for transmission.
E1/PRI crossover cable: RJ-48C/RJ-48C
Install the RJ-48C/RJ-48C crossover when the WAN interface transmits on pins 5 and 4 and receives on pins 2 and 1. Figure C-7 and Table C-12 show the pinouts.
Figure C-7. RJ-48C/RJ-48C crossover cable

Table C-12. RJ-48C/RJ-48C crossover cable specifications

Model number RJ-48C-X


Part number 2510-0059/0323-001
Pair # Signal (MAX) Male RJ-48C (MAX) Male RJ-48C (remote)
1 Receive 2 5
1 4
2 Transmit 5 2
4 1

E1/PRI straight-through cable: RJ-48C/RJ-48C


Before installing the RJ-48C/RJ-48C straight-through cable, verify that the WAN interface transmits on pins 2 and 1 and receives on pins 5 and 4. Figure C-8 and Table C-13 show
the pinouts.
Figure C-8. RJ-48C/RJ-48C straight-through cable specifications

Table C-13. RJ-48C/RJ-48C straight-through cable specifications

Model number RJ48C-S


Part number 2510-0064-001
Pair # Signal (MAX) Male RJ-48C (MAX) Male RJ-48C (remote)
1 Receive 1 1
2 2
2 Transmit 5 5
4 4

E1/PRI straight-through cable: RJ-48C/DA-15


Before installing the RJ-48C/DA-15 straight-through cable, verify that the WAN interface transmits on pins 3 and 11 and receives on pins 1 and 9. Figure C-9 and Table C-14 show
the pinouts.
Figure C-9. RJ-48C/DA-15 straight-through cable

Indosat Page 1
Table C-14. RJ-48C/DA-15 straight-through cable specifications

Model number DA15-X


Part number 2510-0082-001
Pair # Signal (MAX) Male RJ-48C (MAX) Male DA-15P (remote)
1 Receive 1 3
2 11
2 Transmit 5 1
4 9

E1/PRI crossover cable: RJ-48C/DA


Before installing the RJ-48C/DA cable, verify that the WAN interface transmits on pins 1 and 9 and receives on pins 3 and 11. Figure C-10 and Table C-15 show the pinouts.
Figure C-10. RJ-48C/DA crossover cable

Table C-15. RJ-48C/DA crossover cable specifications

Model number DA15-S


Part number 2510-0065-001
Pair # Signal (MAX) Male RJ-48C (MAX) Male DA-15P (remote)
1 Receive 1 1
2 9
2 Transmit 5 3
4 11

E1/PRI straight-through cable: RJ-48C/Bantam


The WAN side of the RJ-48C/Bantam straight-through cable connects to dual bantam jacks. Figure C-11 and Table C-16 show the pinouts.
Figure C-11. RJ-48C/Bantam straight-through cable

Table C-16. RJ-48C/Bantam straight-through cable specifications

Model number DBNT-RJ-45


Part number 2510-0066-001
Pair # Signal (MAX) Male RJ-48 (MAX) Male Dual-310-P (remote)

Indosat Page 2
Pair # Signal (MAX) Male RJ-48 (MAX) Male Dual-310-P (remote)
1 Receive 1 Tip 1
2 Ring 1
2 Transmit 5 Tip 2
4 Ring 2

E1/PRI straight-through cable: MAX 6000 BNC to RJ-48C


The MAX 6000 BNC to RJ-48C cable adapts a modular E1 port on the MAX to coaxial cable E1 lines. You must also set the jumpers within the MAX for 50 ohm service. Figure
C-12 and Table C-17 show the pinouts.
Figure C-12. MAX 6000 BNC to RJ-48C straight-through cable

Table C-17. MAX 6000 BNC to RJ-48C straight-through cable specifications

Part number 2510-0272-001


Pair # Signal (MAX) Male RJ-48C (MAX) Male Dual-BNC (remote)
1 Transmit 4 B1 Sleeve
5 B1 Center
2 Receive 1 B2 Sleeve
2 B2 Center

E1/PRI WAN ports


Table C-18 lists the pins on RJ-48C sockets on the MAX used for E1/PRI WAN interface. Only pins 1, 2, 4, and 5 are used. The remaining pins are not connected.
Table C-18. Transmit and Receive pins

MAX E1/PRI interface RJ-48C DTE


Receive (input) pair, Tip (T1) Position 2
Receive (input) pair, Ring (R1) Position 1
Transmit (output) pair, Tip (T) Position 5
Transmit (output) pair, Ring (R) Position 4

Note: E1/PRI models are also equipped with BNC connectors.

From <https://www.ip-sa.pl/doc/ras/max800-6000/m6hwinst/cables.htm#18067>

Indosat Page 3

You might also like