336 GC

Hydraulic Excavator

Technical Specifications
Engine Track
Engine Model Cat® C7.1 ACERT™ Standard Track Shoes Width 600 mm 24 in
Net Power – ISO 9249 194 kW 259 hp Number of Shoes (each side) 45
Net Power – SAE J1349 194 kW 259 hp Number of Track Rollers (each side) 7
Gross Power – ISO 14396/SAE J1995 195 kW 261 hp Number of Carrier Rollers (each side) 2
Bore 105 mm 4 in
Stroke 135 mm 5 in Drive
Displacement 7.1 L 433 in3 Maximum Gradeability 35°/70%
• Meets China Nonroad Stage III emission standards, equivalent Maximum Travel Speed 4.7 km/h 3 mph
to U.S. EPA Tier 3 and EU Stage IIIA. Maximum Drawbar Pull 297 kN 66,656 lbf
• Recommended for use up to 3300 m (10,830 ft) altitude with
engine power derate above 2300 m (7,550 ft). Hydraulic System
• Net power advertised is the power available at the flywheel when
the engine is equipped with fan, air cleaner, muffler, and alternator. Main System – Maximum Flow – 559 L/min 148 gal/min
• Rating at 2,000 rpm. Implement (279 × (74 ×
2 pumps) 2 pumps)
Engine rpm Maximum Pressure – Equipment – 35 000 kPa 5,076 psi

Implement

Operation 1,900 rpm

Maximum Pressure – Travel 35 000 kPa 5,076 psi
Travel 2,000 rpm
Maximum Pressure – Swing 28 000 kPa 4,061 psi

Swing Mechanism Boom Cylinder – Bore 145 mm 6 in

Boom Cylinder – Stroke 1440 mm 57 in

Swing Speed 8.74 rpm

Stick Cylinder – Bore 160 mm 6 in
Maximum Swing Torque 137 kN·m 101,168 lbf-ft
Stick Cylinder – Stroke 1738 mm 68 in
Weights DB Bucket Cylinder – Bore 145 mm 6 in
DB Bucket Cylinder – Stroke 1151 mm 45 in
Operating Weight 33 800 kg 74,500 lb
• Standard undercarriage, Reach boom, R2.8DB (9'2") stick, HD
1.88 m3 (2.46 yd3) bucket, and 600 mm (24") triple grouser shoes,
6.8 mt (14,991 lb) counterweight.
336 GC Hydraulic Excavator Specifications

Service Refill Capacities

Sound Performance

Fuel Tank Capacity 600 L 158.5 gal ISO 6395:2008 (external) 105 dB(A)
Cooling System 19 L 4.9 gal ISO 6396:2008 (inside cab) 70 dB(A)
Engine Oil (with filter) 20 L 5.3 gal • Hearing protection may be needed when operating with an open
Swing Drive (each) 18 L 4.8 gal operator station and cab (when not properly maintained or doors/
Final Drive (each) 8L 2.1 gal windows open) for extended periods or in a noisy environment.
Hydraulic System (including tank) 373 L 98.5 gal
Hydraulic Tank 153 L 40.4 gal

Standards
Brakes ISO 10265:2008
Cab/FOGS ISO 10262:1998
Cab/ROPS ISO 12117-2:2008

Operating Weights and Ground Pressures

600 mm (24") Triple Grouser Shoes

Weight Ground Pressure
kg (lb) kPa (psi)
6.8 mt (14,991 lb) Counterweight + Standard Undercarriage Base Machine
Reach Boom + R3.2 (10'6") Stick + 1.88 m3 (2.46 yd3) HD Bucket 33 900 (74,800) 70.1 (10.2)
Reach Boom + R2.8 (9'2") Stick + 1.88 m3 (2.46 yd3) HD Bucket 33 800 (74,500) 69.9 (10.1)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

2
 336 GC Hydraulic Excavator Specifications

Major Component Weights

kg lb
Base machine with 6.8 mt (14,991 lb) counterweight, standard swing frame, base frame with standard track rollers 23 010 50,730
and carrier rollers
Track Shoes:
600 mm (24") Width, 11 mm (0.43") Thick, Triple Grouser Track Shoes 3750 8,270
Two Boom Cylinders 560 1,240
Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 550 1,210
Counterweight:
6.8 mt Counterweight 6800 14,991
Swing Frame:
Standard Swing Frame 3160 6,960
Standard Undercarriage:
Base Frame with Standard Track Rollers and Carrier Rollers for Standard Undercarriage 7870 17,350
Boom (including lines, pins, stick cylinder):
Reach Boom 6.5 m (21'4") 3140 6,910
Sticks (including lines, pins, bucket cylinder, bucket linkage):
Reach Stick R2.8DB (9'2") 1650 3,650
Reach Stick R3.2DB (10'6") 1760 3,890
Bucket (without linkage):
1.88 m3 (2.46 yd3) HD 1710 3,770
Quick Couplers:
CW Dedicated QC 480 1,050
Pin Grabber QC 700 1,550

3
336 GC Hydraulic Excavator Specifications

Dimensions
All dimensions are approximate and may vary depending on bucket selection.

3 4

5
6
8 7
9 2

Boom Option Reach Boom

6.5 m (21'4")
Stick Options Reach Stick
R3.2DB (10'6") R2.8DB (9'2")
1 Machine Height:
Cab Height 3170 mm 10.4 ft 3170 mm 10.4 ft
FOGS Height 3310 mm 10.9 ft 3310 mm 10.9 ft
Handrails Height 3160 mm 10.4 ft 3160 mm 10.4 ft
With Boom/Stick/Bucket Installed 3470 mm 11.4 ft 3660 mm 12.0 ft
With Boom/Stick Installed 3300 mm 10.8 ft 3430 mm 11.3 ft
With Boom Installed 2880 mm 9.4 ft 2880 mm 9.4 ft
With Boom/Stick/Bucket Installed (with auxiliary lines) 3520 mm 11.5 ft 3680 mm 12.1 ft
With Boom/Stick Installed (with auxiliary lines) 3380 mm 11.1 ft 3480 mm 11.4 ft
With Boom Installed (with auxiliary lines) 2970 mm 9.7 ft 2970 mm 9.7 ft
2 Machine Length:
With Boom/Stick/Bucket Installed 11 170 mm 36.6 ft 11 220 mm 36.8 ft
With Boom/Stick Installed 11 130 mm 36.5 ft 11 180 mm 36.7 ft
With Boom Installed 9960 mm 32.7 ft 9960 mm 32.7 ft
With Boom/Stick/Bucket Installed (with auxiliary lines) 11 170 mm 36.6 ft 11 220 mm 36.8 ft
With Boom/Stick Installed (with auxiliary lines) 11 130 mm 36.5 ft 11 180 mm 36.7 ft
With Boom Installed (with auxiliary lines) 10 010 mm 32.8 ft 10 010 mm 32.8 ft
3 Upperframe Width without Walkways 3030 mm 9.9 ft 3030 mm 9.9 ft
4 Tail Swing Radius 3530 mm 11.6 ft 3530 mm 11.6 ft
5 Counterweight Clearance 1250 mm 4.1 ft 1250 mm 4.1 ft
6 Ground Clearance 510 mm 1.7 ft 510 mm 1.7 ft
7 Track Length – Length to Center of Rollers 3610 mm 11.8 ft 3610 mm 11.8 ft
8 Track Gauge – Extended (standard undercarriage) 2590 mm 8.5 ft 2590 mm 8.5 ft
9 Track Width/Undercarriage Width (with steps/without steps):
600 mm (24") Shoes 3190 mm 10.5 ft 3190 mm 10.5 ft
Bucket Type HD HD
Bucket Capacity 1.88 m3 2.46 yd3 1.88 m3 2.46 yd3
Bucket Tip Radius 1760 mm 5.8 ft 1760 mm 5.8 ft

4
 336 GC Hydraulic Excavator Specifications

Working Ranges and Forces

All dimensions are approximate and may vary depending on bucket selection.

Feet Meters
12

11
35
10
30 9

8
25
7
20 6
3
5
15
4
4
10 3

2
5
5
1

0 0
2
1
5
2
7 R3.2DB (10'6")
10 3
6 R2.8DB (9'2")
4 1
15
5

20 6

7
25
8

13 12 11 10 9 8 7 6 5 4 3 2 1 0 –1 Meters

40 35 30 25 20 15 10 5 0 Feet

Boom Option Reach Boom

6.5 m (21'4")
Stick Options Reach Stick
R3.2DB (10'6") R2.8DB (9'2")
1 Maximum Digging Depth 7520 mm 24.7 ft 7120 mm 23.4 ft
2 Maximum Reach at Ground Line 11 050 mm 36.3 ft 10 740 mm 35.2 ft
3 Maximum Cutting Height 10 300 mm 33.8 ft 10 360 mm 34.0 ft
4 Maximum Loading Height 7080 mm 23.2 ft 7080 mm 23.2 ft
5 Minimum Loading Height 2580 mm 8.5 ft 2980 mm 9.8 ft
6 Maximum Depth Cut for 2240 mm (8 ft) Level Bottom 7360 mm 24.1 ft 6950 mm 22.8 ft
7 Maximum Vertical Wall Digging Depth 5660 mm 18.6 ft 5620 mm 18.4 ft
Bucket Digging Force (SAE) 172 kN 38,730 lbf 172 kN 38,730 lbf
Bucket Digging Force (ISO) 197 kN 44,350 lbf 197 kN 44,350 lbf
Stick Digging Force (SAE) 143 kN 32,060 lbf 158 kN 35,540 lbf
Stick Digging Force (ISO) 148 kN 33,160 lbf 164 kN 36,890 lbf
Bucket Type HD HD
Bucket Capacity 1.88 m3 2.46 yd3 1.88 m3 2.46 yd3
Bucket Tip Radius 1760 mm 5.8 ft 1760 mm 5.8 ft

5
336 GC Hydraulic Excavator Specifications

Reach Boom Lift Capacities – Counterweight: 6.8 mt (14,991 lb) – without Bucket

3.2 m (10'6") 6.5 m (21'4") 600 mm (24") Triple Grouser Shoes

R3.2DB (GC)

2590 mm (8.5 ft) 3610 mm (11.8 ft)

3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in 9000 mm/360 in

mm
in
7500 mm kg *6850 *6850 *5750 *5750 7700
300 in lb *12,700 *12,700 300
6000 mm kg *7500 7100 *5550 *5550 8580
240 in lb *16,350 15,250 *12,250 *12,250 340
4500 mm kg *11 450 *11 450 *9200 *9200 *8050 6900 *6600 5150 *5600 5050 9130
180 in lb *19,850 *19,850 *17,450 14,800 *12,350 11,100 360
3000 mm kg *14 450 13 850 *10 600 9150 *8750 6600 6800 5050 *5850 4700 9410
120 in lb *31,050 29,850 *22,950 19,700 *19,050 14,250 14,600 10,800 *12,800 10,350 370
1500 mm kg *16 650 12 950 *11 900 8700 8700 6350 6650 4900 6200 4550 9440
60 in lb *35,900 27,950 *25,700 18,700 18,700 13,700 14,350 10,550 13,700 10,050 380
0 mm kg *17 350 12 600 11 750 8400 8500 6200 6550 4800 6350 4650 9220
0 in lb *37,600 27,100 25,250 18,050 18,300 13,300 14,150 10,350 13,950 10,250 370
–1500 mm kg *11 700 *11 700 *17 000 12 500 11 600 8250 8400 6100 6800 5000 8750
–60 in lb *26,500 *26,500 *36,850 26,900 24,950 17,750 18,100 13,100 15,000 10,950 350
–3000 mm kg *18 500 *18 500 *15 750 12 650 11 650 8300 8450 6150 7800 5700 7960
–120 in lb *41,900 *41,900 *34,150 27,150 25,000 17,850 18,200 13,250 17,300 12,600 320
–4500 mm kg *17 700 *17 700 *13 350 12 900 *10 100 8500 *8500 7300 6750
–180 in lb *38,150 *38,150 *28,650 27,800 *21,500 18,300 *18,700 16,250 270

Reach Boom Lift Capacities – Counterweight: 6.8 mt (14,991 lb) – without Bucket

2.8 m (9'2") 6.5 m (21'4") 600 mm (24") Triple Grouser Shoes

R2.8DB (GC)

2590 mm (8.5 ft) 3610 mm (11.8 ft)

3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in 9000 mm/360 in

mm
in
7500 mm kg *7300 *7300 7340
300 in lb *16,150 *16,150 290
6000 mm kg *8550 *8550 *7950 7050 *7000 6000 8250
240 in lb *18,550 *18,550 *17,400 15,150 *15,450 13,350 330
4500 mm kg *12 350 *12 350 *9700 9600 *8400 6850 *7000 5300 8820
180 in lb *26,450 *26,450 *21,000 20,700 *18,350 14,750 *15,450 11,700 350
3000 mm kg *15 350 13 600 *11 100 9100 8950 6600 6800 5050 6700 4950 9110
120 in lb *32,900 29,400 *23,950 19,600 19,250 14,250 14,700 10,900 360
1500 mm kg *14 100 12 900 12 050 8650 8700 6400 6700 4950 6550 4850 9140
60 in lb *34,300 27,750 25,900 18,700 18,750 13,750 14,400 10,600 360
0 mm kg *16 550 12 650 11 750 8400 8550 6200 6700 4950 8920
0 in lb *37,800 27,200 25,300 18,100 18,350 13,400 14,800 10,850 350
–1500 mm kg *10 950 *10 950 *16 800 12 650 11 650 8350 8500 6150 7250 5300 8420
–60 in lb *24,900 *24,900 *36,450 27,150 25,100 17,950 18,250 13,300 16,000 11,700 340
–3000 mm kg *19 750 *19 750 *15 300 12 800 *11 750 8400 8600 6250 8450 6150 7600
–120 in lb *43,650 *43,650 *33,100 27,500 25,300 18,100 18,700 13,650 300
–4500 mm kg *16 000 *16 000 *12 450 *12 450 *9250 8700 *8450 8100 6330
–180 in lb *34,450 *34,450 *26,650 *26,650 *19,400 18,750 *18,550 18,200 250

ISO 10567

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based
on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

6
 336 GC Hydraulic Excavator Specifications

Bucket Specifications and Compatibility

6.8 mt (14,991 lb) Counterweight

Width Capacity Weight Fill Reach Boom (GC)
Linkage mm in m3 yd3 kg lb % R2.8 (9'2") (GC) R3.2 (10'6") (GC)
Pin-On (No Quick Coupler)
Heavy Duty DB 1400 55 1.64 2.14 1460 3,219 100
DB 1550 61 1.88 2.46 1553 3,424 100
DB 1700 67 2.12 2.77 1647 3,631 100
Severe Duty DB 1400 56 1.64 2.14 1643 3,622 90
DB 1550 62 1.88 2.46 1787 3,940 90
Extreme Duty DB 1400 56 1.64 2.14 1877 4,137 90
kg 4980 4685
Maximum load with pin-on (payload + bucket)
lb 10,979 10,329
With Cat Pin Grabber Coupler
Heavy Duty DB 1400 55 1.64 2.14 1460 3,219 100
DB 1550 61 1.88 2.46 1553 3,424 100
DB 1700 67 2.12 2.77 1647 3,631 100
Severe Duty DB 1400 56 1.64 2.14 1643 3,622 90
DB 1550 62 1.88 2.46 1787 3,940 90
Extreme Duty DB 1400 56 1.64 2.14 1877 4,137 90
kg 4285 3989
Maximum load with coupler (payload + bucket)
lb 9,447 8,795

Maximum Material Density:

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do 2100 kg/m3 (3,500 lb/yd3)
not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended 1800 kg/m3 (3,000 lb/yd3)
at ground line with bucket curled. 1500 kg/m3 (2,500 lb/yd3)
Capacity based on ISO 7451:2007. 1200 kg/m3 (2,000 lb/yd3)
Bucket weight with General Duty tips. 900 kg/m3 (1,500 lb/yd3)
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.

7
336 GC Hydraulic Excavator Specifications

Attachments Offering Guide

Not all Attachments are available in all regions. Consult your Cat dealer for specific Attachments available in your region.

PIN-ON ATTACHMENTS CAT PIN GRABBER COUPLER ATTACHMENTS

Boom Type Reach Boom Boom Type Reach Boom
Stick Size R2.8 R3.2 Stick Size R2.8 R3.2
(9'2") (10'6") (9'2") (10'6")
Hydraulic Hammers H140Es 9 9 Hydraulic Hammers H140Es 9 9
H160Es 9 9 H160Es 9 9
B35 9 9 B35 9 9
Multi-Processors MP324 CC Jaw 9 9 Multi-Processors MP324 CC Jaw 9 9
MP324 D Jaw 9 9 MP324 D Jaw 9 9
MP324 P Jaw 9 9 MP324 P Jaw 9 9
MP324 S Jaw 9 9 MP324 S Jaw 9 9
MP324 TS Jaw 9 9 MP324 TS Jaw 9 9
MP324 U Jaw 9 9 MP324 U Jaw 9 9
MP332 CC Jaw 9 9 MP332 CC Jaw 9 9*

MP332 D Jaw 9 9 MP332 D Jaw 9*

MP332 P Jaw 9 9 MP332 P Jaw 9*

MP332 S Jaw 9 9 MP332 S Jaw 9 9*

MP332 TS Jaw 9 9* Crushers P325 9 9
Crushers P325 9 9 Pulverizers P225 9 9
P335 9 9 Demolition and G325B 9 9
Pulverizers P225 9 9 Sorting Grapples G330 9*
P235 9 9 Mobile Scrap and S325B 9 9
Demolition and G325B 9 9 Demolition Shears
Sorting Grapples G330 9 9 Compactors (Vibratory Plate) CVP110 9 9
Mobile Scrap and S325B 9 9 Thumbs 9 9
Demolition Shears Rakes 9 9
Compactors (Vibratory Plate) CVP110 9 9 (continued on next page)
Orange Peel Grapples 9 9
Trash Grapple 9 9
Thumbs 9 9
Rakes 9 9
Cat Pin Grabber Couplers 9 9
Dedicated Quick Couplers 9 9
*Over the front only.

8
 336 GC Hydraulic Excavator Specifications

Attachments Offering Guide (continued)

Not all Attachments are available in all regions. Consult your Cat dealer for specific Attachments available in your region.

CW-45 ATTACHMENTS CW-45S ATTACHMENTS

Boom Type Reach Boom Boom Type Reach Boom
Stick Size R2.8 R3.2 Stick Size R2.8 R3.2
(9'2") (10'6") (9'2") (10'6")
Hydraulic Hammers H140Es 9 9 Hydraulic Hammers H140Es 9 9
H160Es 9 9 H160Es 9 9
B35 9 9 B35 9 9
Multi-Processors MP324 CC Jaw 9 9 Multi-Processors MP324 CC Jaw 9 9
MP324 D Jaw 9 9 MP324 D Jaw 9 9
MP324 P Jaw 9 9 MP324 P Jaw 9 9
MP324 S Jaw 9 9 MP324 S Jaw 9 9
MP324 TS Jaw 9 9 MP324 TS Jaw 9 9
MP324 U Jaw 9 9 MP324 U Jaw 9 9
MP332 CC Jaw 9 9*
MP332 CC Jaw 9 9
MP332 D Jaw 9 9* MP332 D Jaw 9 9
MP332 P Jaw 9 9* MP332 P Jaw 9 9
MP332 S Jaw 9 9 MP332 S Jaw 9 9
Crushers P325 9 9 MP332 TS Jaw 9 9*

P335 9* Crushers P325 9 9

Pulverizers P225 9 9 P335 9 9
P235 9* Pulverizers P225 9 9
Demolition and G325B 9 9 P235 9 9
Sorting Grapples G330 9* Demolition and G325B 9 9
Mobile Scrap and S325B 9 9 Sorting Grapples G330 9 9
Demolition Shears Mobile Scrap and S325B 9 9
Compactors (Vibratory Plate) CVP110 9 9 Demolition Shears
Compactors (Vibratory Plate) CVP110 9 9
BOOM-MOUNTED ATTACHMENTS
Boom Type Reach Boom
Mobile Scrap and S2090 9*
Demolition Shears S3050 9
S3070 9*
*Over the front only.

9
336 GC Standard and Optional Equipment

Standard and Optional Equipment

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional

ENGINE HYDRAULIC SYSTEM
Cat C7.1 ACERT diesel engine 9 Boom and stick regeneration circuit 9
Two selectable modes: Power, Smart 9 Electronic main control valve 9
One-touch low idle with automatic 9 Automatic hydraulic oil warm up 9
engine speed control Bio hydraulic oil capability 9
52° C (126° F) high-ambient 9 Single one-way auxiliary circuit 9
cooling capacity
Combined two-way auxiliary circuit 9
–18° C (0° F) cold start capability 9
Combined two-way auxiliary circuit 9
–32° C (–25° F) cold start capability 9 with hammer return filter
Double element air filter with integrated 9 Medium-pressure auxiliary circuit 9
precleaner
Quick coupler circuit for Cat Pin Grabber 9
Dual stage four micron main filter 9
and 10 micron primary filter with UNDERCARRIAGE AND STRUCTURES
water separator and water separator Towing eye on base frame 9
indicator switch Track guiding guard, full length 9
Biodiesel capability up to B20 9 Track guiding guard, center 9
Bottom guard 9
Travel motor guard 9
Bucket cylinder guard 9
Grease lubricated track 9
Swing frame 9
Swing bearing 9
Base frame with standard rollers 9
(continued on next page)

10
 336 GC Standard and Optional Equipment

Standard and Optional Equipment (continued)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional

BOOMS, STICKS AND LINKAGES SERVICE AND MAINTENANCE
6.8 mt (14,991 lb) counterweight 9 Grouped location of engine oil 9
600 mm (24") triple grouser track shoes 9 and fuel filters
6.5 m (21'4") Reach boom 9 Scheduled Oil Sampling (S·O·SSM) ports 9
2.8 m (9'2") stick 9 Electric refueling pump with 9
automatic shutoff
3.2 m (10'6") stick 9
SAFETY AND SECURITY
Bucket Linkage, DB family without 9
lifting eye
Caterpillar One Key security system 9

ELECTRICAL SYSTEM
Lockable external tool/storage box 9
Maintenance-free 1,000 CCA 9 Lockable door, fuel, and hydraulic 9
batteries (×2) tank locks
Centralized electrical disconnect switch 9 Lockable fuel drain compartment 9
LED chassis light, LH and RH boom 9 Service platform with anti-skid plate 9
lights, cab lights and recessed bolts
CAT CONNECT TECHNOLOGY RH handrail and hand hold 9
(ISO 2867:2011 compliant)
Cat Product Link™ 9
Signaling/warning horn 9
Ground-level secondary engine 9
shutoff switch
Rearview camera, right-hand-side mirror 9

336 GC Attachments

Dealer Installed Kit and Attachments

Attachments may vary. Consult your Cat dealer for details.

CAB SAFETY AND SECURITY GUARDS

• Radial lower wiper • Bluetooth® receiver kit • Standard swivel guard
• LH/RH electrical pedal for tool control • Bluetooth key fob • Falling object guard system (not compatible
• Rain protector plus cab light cover with cab light cover, rain protector)
• Mesh guard full front (not compatible
with cab light cover, rain protector)
• Mesh guard lower half front
• Full protecting vandalism guard

11
336 GC Cab Options

Cab Options

Comfort
ROPS, standard sound suppression
Polycarbonate roof hatch
High-resolution 203 mm (8") LCD touchscreen monitor
Automatic bi-level air conditioner
Jog dial and shortcut keys for monitor control
Keyless push-to-start engine control
Height-adjustable console, three steps with tool
Mechanically adjustable seat suspension
51 mm (2") seat belt
Fixed left-side console
Bluetooth integrated radio with USB ports
12V DC outlets (×2)
Document storage
Cup and bottle holders
Openable two-piece front window
Upper radial wiper with 70/30 with washer
Openable steel hatch
LED dome and lower interior lights
Roller front sunscreen
Beacon ready
Washable floor mat

Standard
Optional

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEXQ2361 (05-2018)
at www.cat.com Build Number: 07A
(China)
© 2018 Caterpillar
All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.