Cat ®

426F2
BACKHOE LOADER

FEATURES:
„ Product Link™ – Get the most out of your Cat® Backhoe Loader. „ Powerful Hydraulics – The F2 Series machines really make an impact.
Product Link provides quick access to vital information such as High pump flow in a superior hydraulic system allow the operator
machine location, hours worked, machine error codes and fuel excellent hydraulic performance at their fingertips.
burn to help you maximize machine performance. „ Power Train – The 426F2 is equipped with our tried and tested

„ Cab and Controls – The introduction of the new cab to the Cat Backhoe Cat 3054C engine and is finely tuned to a Cat four speed manual

Loader provides a comfortable and easy to use operator environment. transmission. This fine tuning enables the 426F2 to reach a

With the ability to customize your experience, the all new cab allows 40 km/h roading speed.

the operator to perform in greater comfort and enjoy the latest

technologies available on today’s generation of backhoe loaders.

Specifications
Engine Noise Level

Model Cat 3054C Mechanical Turbo Inside Cab 80 dB(A)

Rated Power (standard) @ 2,200 rpm Outside Cab 104 dB(A)

Gross Power ISO 14396 68.5 kW/93 hp

Net Power Rating @ 2,200 rpm Transmission
ISO 9249 66 kW/88 hp Travel speeds of Two Wheel Drive backhoe loader at full throttle, when
Net Peak Power @ 2,000 rpm equipped with 16.9×28 rear tires.
SAE J1349 65 kW/87 hp Power Shuttle Power Shuttle
ISO 9249 65 kW/88 hp Forward Reverse
EEC 80/1269 65 kW/88 hp 1st 5.5 km/h 1st 5.5 km/h
Torque Rise (net) @ 1,200 rpm 38% 2nd 9.0 km/h 2nd 9.0 km/h
Maximum Torque @ 1,400 rpm 394 N·m 3rd 20.7 km/h 3rd 20.7 km/h
Bore 105 mm 4th 40.0 km/h 4th 40.0 km/h
Stroke 127 mm
Displacement 4.4 L Service Refill Capacities
• Net power advertised is the power available at the flywheel when the Cooling System 22.0 L
engine is equipped with fan, air cleaner, muffler and alternator. Fuel Tank 160 L
• No derating required up to 2286 m altitude. Auto derate protects Engine Oil with Filter 8.8 L
hydraulic and transmission systems. Transmission (Power Shuttle)
• Engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards. AWD 15 L
Rear Axle 14.5 L
Hydraulic System Planetaries 1.5 L
Type Closed Center Front Axle (AWD) 11 L
Pump Type Variable Flow, Axial Piston Planetaries 0.7 L
Maximum Pump Capacity 132 L/min Hydraulic System 106 L
System Pressure Hydraulic Tank 40 L
Backhoe 250 Bar

Loader 250 Bar

426F2 Backhoe Loader

Weights* Axle Ratings

Operating Weight (estimated) 7990 kg Front Axle, AWD
Operating Weight (Maximum) (ROPS Capacity) 8760 kg Static 22 943 kg
Counterweights Dynamic 9177 kg
Base 115 kg Rear Axle
Medium 240 kg Static 19 120 kg
Minimum Counterweight Recommendations – Standard Stick Dynamic 7648 kg
Loader Bucket – GP 115 kg
Loader Bucket – MP 0 kg Steering
*Machine Configuration – standard engine, standard stick hoe, standard Type Front Wheel
cab with A/C, AWD standard shift transmission, 0.96 m3 MP loader Power Steering Hydrostatic
bucket, 610 mm standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, AWD Cylinder, One (1) Double-acting
no counterweight, 80 kg operator and full fuel tank. Bore 65 mm
Stroke 120 mm
Axles Rod Diameter 36 mm
All Wheel Drive (AWD) Turning Circle
Features AWD (inner wheel not braked)
• Heavy-duty rear axle with self adjusting inboard brakes, differential Outside Front Wheels 8.18 m
lock and final drives. Outside Widest Loader Bucket 10.97 m
• AWD is engaged by front console panel switch or by brake pedal
during all-wheel-braking operation. AWD can be engaged on the move, Brakes
under load, in any gear, forward or reverse. AWD has outer final drives Fully enclosed boosted, hydraulic, multiple discs.
for easy maintenance.
Features
• AWD front axle is pendulum mounted and permanently sealed and
lubricated, requiring no daily maintenance. Also features double-acting • Inboard oil-immersed, hydraulically actuated multiple Kevlar discs
steering cylinder with 52° steering angle for increased maneuverability. on final drive input shaft.
• Completely enclosed and sealed.
• Self-adjusting.
• Dual foot-operated boosted brake pedals can be interlocked for roading.
• Parking/secondary brakes are independent of the service brake
system. Parking brake is mechanically applied through a hand lever
located in the right side console.
• Meets ISO 3450:1996 requirements.

4 3 8
9
13

5 12

1
10

6 11

2 14 15
17
3 16

18

 426F2 Backhoe Loader

Machine Dimensions

GP – 1.05 m3 MP – 0.96 m3
1 Overall Length in Roading Position 5726 mm 5682 mm
Overall Transportation Length 5678 mm 5675 mm
2 Overall Transportation Height – 4.3 m 3757 mm 3757 mm
Overall Width (excluding loader bucket) 2346 mm 2346 mm
3 Height to Top of Cab/Canopy 2869 mm 2869 mm
4 Height to Top of Exhaust Stack 2716 mm 2716 mm
5 Rear Axle Centerline to Front Grill 2708 mm 2708 mm
6 Wheelbase AWD 2200 mm 2200 mm
Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with
610 mm standard duty bucket, and 1.05 m3 GP loader bucket and standard equipment unless otherwise specified.

Loader Bucket Dimensions and Performance

GP – 1.05 m3 MP – 0.96 m3
Capacity 1.05 m3 0.96 m3
Width 2262 mm 2262 mm
Lift Capacity at Maximum Height 3610 kg 3475 kg
Lift Breakout Force 54.46 kN 54.0 kN
Tilt Breakout Force 53.92 kN 60.48 kN
Tipping Load at Breakout Point 7012 kg 7110 kg
7 Maximum Hinge Pin Height 3447 mm 3447 mm
8 Dump Angle at Full Height 46° 46°
Dump Height at Maximum Angle 2733 mm 2764 mm
9 Dump Reach at Maximum Angle 900 mm 825 mm
10 Maximum Bucket Rollback at Ground Level 38° 39°
11 Digging Depth 88 mm 147 mm
Maximum Grading Angle 113º 116º
12 Grill to Bucket Cutting Edge, Carry Position 1482 mm 1450 mm
13 Maximum Operating Height 4368 mm 4368 mm
Bucket Weight (excluding teeth and forks) 428 kg 611 kg

Backhoe Dimensions and Performance

Standard Stick – 4.3 m
14 Digging Depth, SAE Maximum 4119 mm
Digging Depth, Manufacturer’s Maximum 4709 mm
15 Digging Depth, 2440 mm Flat Bottom 3743 mm
Digging Depth, 600 mm Flat Bottom 4094 mm
Digging Depth, 600 mm Flat Bottom, Manufacturer’s 4670 mm
16 Reach from Swing Pivot at Ground Line 5609 mm
Maximum Operating Height 5719 mm
Loading Height 4031 mm
17 Loading Reach 1477 mm
Swing Arc 180°
Bucket Rotation 205°
18 Stabilizer Overall Width 2242 mm
Bucket Dig Force 57.22 kN
Stick Dig Force 35.29 kN

426F2 Backhoe Loader

Standard and Optional Equipment (Standard and Optional equipment may vary. Consult your Cat dealer for details.)
Standard Optional Standard Optional
Cab ROPS and FOPS Guards
Canopy 9 — Guard, Driveshaft — 9
Cab, Standard — 9 Loader Safety Brace 9 —
Tires/Steering/Brakes Boom, Sticks and Linkages – Backhoe
Two Wheel Drive 9 — Stick, Standard (4.26 m) 9 —
All Wheel Drive — 9 Transport Lock, Swing 9 —
100% Differential Lock 9 — Transport Lock, Boom 9 —
Hydraulic Boosted Brakes (dual pedals) 9 — Hydraulics
Tires 16 inch (Front) – 2WD 9 — Hydraulic Pump (132 L/min) 9 —
Tires 18 inch (Front) – AWD 9 — Side Shift Lock (electro-hydraulic) 9 —
Tires 28 inch (Rear) 9 — Hydraulic Oil Cooler 9 —
Engine/Transmission Hydraulics – Backhoe
Battery 750 CCA, Maintenance Free 9 — Hydraulic Lines, 1-Way — 9
(standard) Hydraulic Quick Disconnects — 9
Hinged Radiator Unit for Simple 9 — (twist to connect)
Debris Removal Hydraulics – Loader
Engine 68.5 kW (93 hp) Cat 3054C 9 — Loader Kickout, Float 9 —
Transmission, 4-Speed Manual 9 — Parallel Lift 9 —
Input Electrical
Controls, Mechanical Lever 9 — Product Link, Cellular 9 —
Power Steering, Hydrostatic 9 — Reversing Alarm 9 —
Other Attachments Beacon, Rotating — 9
Counterweight, 115 kg — 9
Counterweight, 240 kg — 9
Tool Storage Box 9 —
Transport Tie-downs 9 —

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ8016-02 (01-2018)
© 2018 Caterpillar Replaces AEHQ8016-01
All rights reserved (Africa, APD, Middle East,
South America)
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.