BUY IN PRINT WORLDWIDE MAGPI.

CC/STORE

Issue 92 April 2020 magpi.cc The official Raspberry Pi magazine

l
Track locan
r & p ollutio
weathe

PBERRY PI
RAS
PR OB L EMS
D!
R

E
F IXES FO

L
QUICK FAULTS!

SO
TRICKY

£5.99
magpi.cc/store

Tweet with a hacked Make a Safe Solar powered

Morse Code Key Cracker game security camera

43 PAGES OF PROJECTS & TUTORIALS

 WELCOME

WELCOME
to The MagPi 92

I
f you have a problem, if nobody else can help, and – crucially
– if it’s Raspberry Pi-related, maybe you should buy The MagPi
Lucy

EDITOR
magazine. OK, so we’re not quite the A-Team, but we are experts Hattersley
at troubleshooting computers. Rob has put together an incredible
Lucy is editor of The
Raspberry Pi Problems Solved feature (page 28). From fixing pesky boot MagPi and an expert
in her chosen fields
problems to advanced system support, there’s advice for every maker. of retro computing,
imaginary dogs, and
We’ve got some top tutorials too. PJ has now added facial recognition pasta making.
Self-isolating since
to his magic mirror (page 50). He’s also found time to hack a Morse code the 1980s.

key to send messages to Twitter (page 42). I’ve been continuing to delve magpi.cc

into Raspberry Pi Shake earthquake data (page 46). Rosie and Phil have
been looking at weather and pollution tracking (page 60).
And that’s before we get to the community projects: from a CNC
machine hacked to become an Etch-a-Sketch (page 14), to a useful GET A
sourdough incubator (page 20), to an amazing clock that uses Instagram RASPBERRY
images for its digits (page 22). ZERO W KIT
We solve Raspberry Pi-related
problems, and the incredible
PAGE 26
community never lets us down. So
hunker down, ignore the outside
world for a while, and enjoy a
cracking edition of The MagPi.
See you next month!

Lucy Hattersley Editor

magpi.cc 03
Contents
> Issue 92 > April 2020

Cover Feature

28 Raspberry Pi
problems solved
Regulars
06 World of Raspberry Pi
92 Your letters
97 Next Month
98 The Final Word

Project Showcases
10 Instaclock
14 CNC Etch-A-Sketch
16 Solar-powered Camera
18 Flying Saucer Clock & NAS
20 Chamber: Sourdough Incubator
22 PiVidBox 28

10 18

Instaclock Flying Saucer Clock & NAS

DISCLAIMER: Some of the tools and techniques shown in The MagPi magazine are dangerous unless used with skill, experience, and appropriate personal protection equipment. While
we attempt to guide the reader, ultimately you are responsible for your own safety and understanding the limits of yourself and your equipment. Children should be supervised. Raspberry
Pi (Trading) Ltd does not accept responsibility for any injuries, damage to equipment, or costs incurred from projects, tutorials or suggestions in The MagPi magazine. Laws and regulations
covering many of the topics in The MagPi magazine are different between countries, and are always subject to change. You are responsible for understanding the requirements in your
jurisdiction and ensuring that you comply with them. Some manufacturers place limits on the use of their hardware which some projects or suggestions in The MagPi magazine may go
beyond. It is your responsibility to understand the manufacturer’s limits.
42 50
Tutorials

38 Starter electronics – part 2

42 Tweet with Morse code
46 Raspberry Shake – part 2
Tweet with Morse code Magic mirror – part 3
50 Magic mirror – part 3
54 Simon Safe Crack game
72
The Big Feature
60

1.3″ Color TFT Bonnet Track weather & pollution

82 Reviews
72 1.3″ Color TFT Bonnet
74 Maker pHAT
76 SaniaBOX
78 Top 10 audio projects
80 Learn retro gaming

Community
82 Dr Wednaud Ronelus interview
84 This month in Raspberry Pi
Dr Wednaud Ronelus interview 88 Events calendar

ARGON ONE 95
WIN

COOLING CASES
 THE WORLD OF RASPBERRY PI

Raspberry Pi
Imager released
New official tool makes it easy to write an OS image to your microSD card. By Rosie Hattersley

R
Until now, aspberry Pi has launched an OS imaging experience is trying to make it as easy as possible
beginners had been
advised to buy a
tool called Raspberry Pi Imager. It makes it to get started.”
kit with Raspberry simpler to reuse an existing microSD or SD Despite options such as NOOBS and Etcher,
Pi software pre-
installed on a card card with Raspberry Pi. “when it comes to microSD cards, programming
The new tool enables Raspberry Pi users to them with your favourite Raspberry Pi operating
install the free Raspbian OS (available in three system has always been a little bit tricky,”
versions) along with a range of other operating says Gordon.
systems (magpi.cc/introducingimager).
Gordon Hollingworth, Director of Software Free to download
Engineering at Raspberry Pi, explains: “One of To get your copy of Raspberry Pi Imager, head
the most important aspects of the Raspberry Pi to magpi.cc/imager and select and download
the version of the imager for Windows, macOS,
T he utility reads the relevant file directly or Ubuntu. Raspberry Pi Imager will be auto-
installed and launched on your computer.
from our website and writes it straight to Inside Raspberry Pi Imager, you’ll find Raspbian
as default operating system. Click on ‘Raspbian
the SD card (Other)’ to choose Lite and Full versions of

06 magpi.cc Raspberry Pi Imager released

 Raspberry Pi Imager for Windows, macOS, and Ubuntu
make setting up your Raspberry Pi really simple

Raspbian. Other operating systems, such as

LibreELEC and Ubuntu Server and Core, are also
available. Raspberry Pi Imager includes a microSD
card format tool and a Raspberry Pi 4 EEPROM
boot recovery tool. You can also opt to install any
operating system that you have downloaded as an
image file.
Grand designs for Raspberry
“Once you’ve selected an operating system
from the available options, the utility reads the
Pi with expandable housing
relevant file directly from our website and writes
it straight to the SD card,” explains Gordon. solutions
“During this process, Raspberry Pi Imager also
caches the downloaded operating system image.” Versatile enclosure systems for
Clicking ‘Write’ initiates the OS writing Raspberry Pi 3B, 3B+ and 4B
process. Once complete, the microSD card can be
inserted into the slot on Raspberry Pi and the OS If you are using Raspberry Pi for industrial
launched as normal. applications, use the RPI-BC development
kits with easy mounting on to the DIN
rail and optional PCBs for expansion.

For your automation systems, use the

Univeral Case System (UCS) with lots of
room for additional features.

For additional information call 0845 881 2222 or visit

phoenixcontact.co.uk/raspberry_pi
Simply choose an operating system to install, then select your
microSD card and write the OS to it
 THE WORLD OF RASPBERRY PI

Raspberry Pi releases
SD Card Speed Test
Raspberry Pi diagnostic tool lets you check your card’s efficiency. By Rosie Hattersley

R
aspberry Pi has launched its first
diagnostic tool. The SD Card Speed Test
tool measures the write and read speeds of
the card in your Raspberry Pi. The utility gives a
far more accurate indication of data throughput
than the putative write/read capabilities claimed
by card makers. A Raspberry Pi operating system
runs from the microSD card on which it’s
stored, so the card’s data transfer speed directly
correlates to how fast programs and files can be
loaded and read, as well as how fast data can be
saved to the card.

 easures the write and read speeds of the

M Get an accurate measure of how fast your microSD card is
transferring data to Raspberry Pi

card in your Raspberry Pi

to work out whether your supposedly fast SD card
Simon Long, Senior Principal Software is actually meeting its specified speed.”
Engineer at Raspberry Pi, says that while ‘fake’ The speed test tool is also useful for
SD cards are fairly easy to spot, “it’s much harder photographers and videographers because if the
card can’t keep up, image data won’t be saved,
leading to potential disappointment or even
microSD cards have disaster (imagine if it were your honeymoon
a range of speeds,
and it is important
photos at stake or impossible-to-replicate
to have one that dash‑cam footage).
runs the Raspbian
OS effectively To install the new tool, open a Terminal
window and enter:

sudo apt update

sudo apt install agnostics

Raspberry Pi will be launching more hardware

diagnostic tools over the coming months. More
information on the app can be found on the
Raspberry Pi website: magpi.cc/sdspeedtest.

08 magpi.cc Raspberry Pi releases SD Card Speed Test

 3 ISSUES
FOR £5

Subscribe by phone: 01293 312193

Subscribe online: magpi.cc/subscribe
Email: [email protected]
 PROJECT SHOWCASE

Instaclock
Designed to celebrate a new home, Instaclock
uses two Raspberry Pi computers to great
visual effect. Rosie Hattersley finds out more

T
here’s nothing like a deadline to focus the
mind! Copenhagen-based illustrator and UX
designer Riccardo Cereser was about to move
into a new apartment with his girlfriend, and was
determined his new home would have a unique Instaclock displays fun images
timepiece. Instaclock (magpi.cc/instaclock) is of numbers, rather than being
a standard timepiece
the result.
Having studied at the Copenhagen Institute of
Riccardo
MAKER

Interactive Design, Italian-born Riccardo was keen

Cereser
that his new apartment would include an object
Riccardo is a that reflected his skills. He began sketching out
UX designer for ideas in Photoshop, starting with the idea of images This, Riccardo explains, is how the project
logistics company
representing numbers. “A hand showing fingers; a became known as Instaclock. He was able to
DFDS. After growing
up in Italy and bicycle wheel resembling the number 0; candles on a visualise his plan using Photoshop and made a
Dublin, he moved cake; or the countdown numbers that appear in the prototype for his idea. It was clear that there was
to Copenhagen to beginning of a recording…” he suggests. no need to display seconds, for example. Minute-
study interactive
design. He’s a Having decided the idea could be used for an by-minute updates would be fine.
keen illustrator interactive clock, he quickly worked out how such
and Raspberry Pi
retro gamer.
an image-based concept might work displaying the I started taking photos
hour, minutes, and seconds on displays in three
@ricently wooden boxes. of anything that could
Next, he set off around Copenhagen. “I started
taking photos of anything that could resemble a resemble a number
number, aiming to create sets of ten pictures each
based on a specific theme,” he recalls. “I then Getting animated
thought how awesome it would be to be able to switch Next up was figuring out how to call up and
the theme and create new sets on the go, potentially refresh the images displayed. Riccardo had some
by using Instagram.” experience of using Raspberry Pi, and had even

10 magpi.cc Instaclock
 PROJECT SHOWCASE

Ikea file organisers make ideal

frames to hold the displays

Quick FACTS
> Digital sketching
Pressing the button switches tools were
the image set used to display invaluable for
the numbers on that screen planning this
project

> Many of the items

used to build
Instaclock came
from Ikea

> Riccardo got

Instaclock’s ‘off
switch’ code from
The MagPi

> He is thinking of

adding an alarm
function next

> He’s pondering an

animated weather
cartoon version, too

Stills from cartoons and

illustrations work really
well as a visual device
and add to Instaclock’s
quirky appeal

Instaclock magpi.cc 11
 PROJECT SHOWCASE

Build a cool clock

Each of the Instaclock’s twin screens has a Raspberry
Pi 3 Model B controlling image delivery to it. You’ll
need to adapt or build a box to house each screen,
and drill holes to accommodate cables and ventilate it.

Attach the LCD HAT’s ribbon cable to the

01 screen’s input port. You might also want to
use magnets to help secure the screen in place in its
display box. Make sure all the screens are grounded!

Graphics from classic made a RetroPie games console. He also had a friend
games may be used
to tell the time – can on the interactive design course who might just be
you work it out? able to help…
Creative coder Andreas Refsgaard
Install Raspbian on 8GB microSD cards, boot up, (andreasrefsgaard.dk) soon got involved, and was
02 and connect each Raspberry Pi to your wireless quickly able to come up with a Processing sketch for
network. Set a script to sync folders via Dropbox
Instaclock (magpi.cc/instaclockgit).
and use the cron scheduler to change the displayed
image every two minutes (or another interlude).
T hey also added a rule that
shuts a screen down if the
button on top of it is pressed
for ten seconds or more
Having spent dozens of hours looking into how an
API might be used to pull in specific images for his
clock, Riccardo was grateful that Andreas immediately
grasped how it could be done. Riccardo then set
Set the Processing sketch to launch at
03 startup (see magpi.cc/process). Disable the
parameters in cron for each Raspberry Pi used, so the
Instaclock loaded images at startup and moved on to
screensaver (so it doesn’t interrupt the clock script)
and hide the cursor. Back up the microSD card, then the next image set every ten seconds.
switch on. Repeat steps for the other Raspberry Pi. Because Riccardo wanted Instaclock to be as user-
friendly as possible, they also added a rule that shuts

12 magpi.cc Instaclock
 PROJECT SHOWCASE

Photographing distinctive details was

part of the appeal of the project

a screen down if the button on top of it is pressed

for ten seconds or more. The script was one he got
from The MagPi (magpi.cc/offswitch).

Assembly time
One of the most fun aspects of this project was
the opportunity to photograph, draw, or source
online images that represent numerals. It was
also the most time-consuming, of course. Images
reside in Dropbox folders, so can be accessed from
anywhere. Deciding on a suitable set of screens
to display them, and boxes or frames for them,
could also have dragged on but for an impromptu
visit to Ikea. Riccardo fortuitously found that the
Waveshare screens he’d selected would fit neatly
into the store’s Dragan file organiser boxes. He
was then able to laser-cut protective overlays
Visitors to Riccardo’s apartment have been intrigued and challenged by the
secured with tiny magnets. displays, which even feature the occasional maths problem

Instaclock magpi.cc 13
 PROJECT SHOWCASE

CNC Etch-A-Sketch
Engineer Quint Crispin has been drawing lots of attention
to his latest project, as David Crookes discovers

F
or 60 years, the iconic Etch-A-Sketch
toy, invented by French electrician André
Cassagnes, has provided a blank canvas
that has both enthralled and infuriated. Many
of us will go no further than drawing some simple
straight lines and shapes. But there are some
amazing practitioners out there (check out Jane
Labowitch and Dave Roberts) who can generate
Quint
MAKER

Crispin incredible works of art.

Quint Crispin admits he is not one of them,
Quint is an engineer but, with a bit of ingenuity, the engineer has
who loves to play nevertheless found a way to unleash his creativity.
around with cool
builds. He created
He has devised a machine to perform the magic for
his Etch-A-Sketch him, using a Raspberry Pi 3 computer connected to
project with the For the creation of stop-motion videos, the camera sits behind
a CNC HAT made by Protoneer. This has enabled black fabric to prevent reflections, and each image is drawn
help of his young
two NEMA-17 size stepper motors to be controlled 1 to 2 mm apart for smooth footage
son, who assisted
with its fine-tuning. – hooked, as they are, to the Etch-A-Sketch’s
two knobs using a belt attached around blue bCNC, I knew I’d found my solution for a portable
magpi.cc/cncetch
timing pulleys. CNC Etch-A-Sketch.” Indeed, his use of our
favourite computer meant he could produce a
The project is powered
by four lithium cells
Shaking things up wireless unit that was so light and sturdy, it could
in conjunction with a “I had no idea the Raspberry Pi was so powerful,” also be picked up and shaken to clear the display
battery management he says. “But when I discovered it was capable of without causing any damage.
system to give five
hours of operation driving stepper motors using programs such as “Other projects have connected stepper motors
to an Etch-A-Sketch, but the makers have quickly
found they have to take the whole thing apart
just to reset the screen,” Quint tells us. “That’s
something I’ve never had to worry about because
I spent a lot of time designing and producing a
strong frame. It meant more work up front, but
was well worth it in the long run.”
Even so, the challenge didn’t stop there. As
with all CNC machines (those which use software
connected to a tool to automate control such as 3D
printers), simple x and y co-ordinate commands
are issued. “You’re basically telling the machine
‘go here, go there, now here, now there’ using
commands known as G-code,” Quint explains.
Coding is, therefore, crucial.

Turning things around

For this, Quint used variations of the G-code
command G1, noting the required x/y position and
the required speed. “As an example, G1 X40 Y60

14 magpi.cc CNC Etch-A-Sketch

 PROJECT SHOWCASE

A program called GRBL runs in

the background on the CNC HAT
and allows the rotation of the A standard Etch-A-Sketch toy is
stepper motors to be calibrated able to display whatever image is
outputted via the bCNC program
installed on Raspberry Pi

With a design ready in the free program

bCNC, G-code can be sent to the
Raspberry Pi to activate the stepper
motors to create it on the Etch-A-Sketch
Quick FACTS
> The project cost
less than $200

 sing small enough line

U > It uses 3D printer

segments, you can even stepper motors

draw a circle! > The frame is light

enough to shake

F400 means go 40 mm to the right and 60 mm > Raspberry Pi is

up at a speed of 400 mm per minute,” he says. running bCNC
“Using  small enough line segments, you can even
draw a circle!” > It also wears a
The first real problem he encountered was the CNC HAT
looseness in the Etch-A-Sketch mechanism when
changing directions. “You have to turn the wheels
further than you think – if you mark an Etch-A-
Sketch dial and bring it to the same spot from both
directions, you’ll get about a 1.5 mm mismatch
For fun, Quint decided to play around with stop-motion video.
which can make your sketches look really poor. He’d create an image, take a photo of the Etch-A-Sketch
Most CNC software has ‘backlash compensation’ to screen, shake, and create another image
account for this, but bCNC does not. Fortunately,
I stumbled on a free program called NoLash Sketch screen with the knobs being automatically
that adds backlash compensation to the G-code manipulated. It has also allowed for some very
program itself. You just tell it how much to elaborate designs, which have impressed all who
compensate for and it does the job for you.” have seen them being created. “Once I got it
Now, by firing up bCNC, Quint can create an figured out, everything worked really well,” he
image and have it replicated on the Etch-A- says. “The experience has been magical.”

CNC Etch-A-Sketch magpi.cc 15

 PROJECT SHOWCASE

Solar-powered
Raspberry Pi Camera
Kaspars Dambis has put an eye in the sky using his Raspberry Pi, as David Crookes explains

B
uilding a new family home from scratch boats and cars. This, he figured, would gather
is not for the faint-hearted. Neither, on energy from the sun to charge a 12 V battery and,
reflection, is climbing up a tree to install a with the use of an inexpensive 12 V-to-5 V buck
solar panel and a CCTV camera, and yet Kaspars module, power the Raspberry Pi 3 Model B and an
Dambis has done both. eight-megapixel Raspberry Pi Camera Module v2.
One thing led to another. “I wanted to monitor At first, Kaspars attempted to build a case from
the construction site remotely because we a generic project box, but he found it was relatively
currently live 100 kilometres away,” he says. But difficult to find decent clear glass for the camera
Kaspars
MAKER

Dambis rather than buy an off-the-shelf CCTV system, window. “I then noticed a dummy security camera
he purchased a dummy camera case, creating his in a local hardware store which had perfect clear
Kaspars is a own way of capturing images using a Raspberry Pi 3 glass on one end, and full weather projection for
web developer Model B computer. the battery-powered LED system,” he says. And
and electronics
“From the start, I wanted to keep watch over the this worked a treat.
enthusiast who
enjoys creating building of our home and create a time-lapse of
simple, low-
power connecting
the process for fun,” explains Kaspars. “I knew it
had to be a battery-powered and wireless system
T he weather protection
projects that use
microcontrollers. because getting mains power to the device wasn’t proved to be great,
going to be possible on a site like that.”
kaspars.net
even during the
Seeing the light
Kaspars picked up a lightweight 18 V 5 A solar panel winter months
that was marketed as being perfect for charging
Using hook-and-loop fasteners, the Camera
Module could be attached to Raspberry Pi’s case
which, in turn, was secured to the inner housing
of the camera casing. “The weather protection
proved to be great, even during the winter months,
and [my] Raspberry Pi never had issues with the
temperature ranges either.”
To get as much energy as possible, the solar
panel and the 12 V battery were positioned up
high on a wooden frame, with the security camera
device attached too. This wasn’t ideal. “The
battery was heavy and the frame broke during
a storm, so I created two separate frames: one
for the solar panel with the camera unit below
Alert! and another for the battery and the solar charge
Batteries controller,” he says.
included
Please take care with Monitoring from afar
rechargebable car Kaspars configured his Raspberry Pi to connect
batteries: Fitting the system in a tree prevents tampering and makes
magpi.cc/carbat the setup look less intrusive to a nearby WiFi access point via a standalone

16 magpi.cc Solar-powered Raspberry Pi Camera

 PROJECT SHOWCASE

In using an
inexpensive dummy
case, the resulting
The components – including build had the bonus
the solar panel and the battery of looking like a
in its waterproof casing – are security camera
affixed to a wooden frame and
placed outside

A
 12 V, 7 Ah lead-acid battery has been sufficient to provide
an average power consumption of 2 W since it can provide
84 watt-hours of energy

A Raspberry Pi 3
modem plugged in at his neighbour’s
Model B computer
house by setting the access credentials in the
with a Camera
wpa_supplicant.conf file in the root of the SD Module requires
card. “The most basic time-lapse functionality significant power for
was added using a simple Bash script which takes continuous operation, Quick FACTS
a picture from the raspistill tool at the desired hence the decision to
time intervals and stores it on the SD card.” use a solar panel > The project cost
Connecting remotely involved setting up Kaspars $222
an external server and using the SSH tunnel,
> He’s also paying
autossh. When up and running, a photo is taken
for 10GB of
every hour and it can be downloaded using SCP
monthly data
when connected to the same WiFi access point as
Raspberry Pi. Video capture and real-time feeds > It should run
can also be viewed in a browser. for two days
It all means Kaspars is now able to remotely log without charging
in to his Raspberry Pi and eventually see his new
home come into being. There is still an element > Getting it up a
of fear, though. “The ability to connect to a tree was the
Raspberry Pi which is up in a tree powered by the hardest part

sun and 100 km away is a special feeling,” he says.

> All cases need to
“Every command you type in the terminal has the
be waterproof
potential to break the WiFi connection – and the
cost of each mistake is a 200 km drive to restart
Dummy security cameras can be picked up cheaply
the device.” – this one cost Kaspars just $8

Solar-powered Raspberry Pi Camera magpi.cc 17

 PROJECT SHOWCASE

Flying Saucer
Clock and NAS
If you’re thinking of fashioning yourself a new clock, have you considered
one with an extraterrestrial twist? Nicola King has a close encounter…

U
K-based Harry Tansey is a maker who’d
been considering creating some form of
clock project for a while, when he was
inspired to make something that did more than
just tell the time. “I have been experimenting
with WS2812B LEDs (aka NeoPixels) over the past
few years and knew they were going to be a key
component,” he says. “When my NAS (network-
Harry
MAKER

Tansey attached storage) box started playing up last year, A side view of the saucer. Transparent segments are used to
diffuse the LEDs, with light blockers between them for
I knew I had to make or buy a replacement. Given
crisp separation
A software that both a NAS and a clock tend to be on 24/7, I
engineer, DIYer, started toying with the idea of ring of 60 LEDs as both time and money with expensive, failed 3D
and maker, with
clock segments and arranging the NAS components prints. “Failure can be expensive when the weight
interests in music
visualisation, XR, (Raspberry Pi, HDDs, and PSU) inside.” of filament in the project is just short of 2 kg! This
3D design and equates to nearly 120 hours of printing time – or
printing, Raspberry
Pi, microcontrollers,
Print perfect about four days using two 3D printers running
electronics, and So, the concept for the Flying Saucer Clock was simultaneously for around 14 hours a day,”
blinky LEDs. born, and Harry set about designing a prototype he calculates.
planetzarg.com using Fusion 360. Given that he was going to Harry also set himself another challenge: “It
3D-print the clock, he knew it was critical to get was critical to give the pieces enough tolerance so
the design as precise as possible, in order to save they could be used straight from the printer and fit
together with minimal surface finishing.”
Despite a few hiccups with his first attempt,
Harry pushed on, and the finished article is
something to behold. So, how is it constructed?
“The outer ring has 60 RGB LED segments
constructed simply by cutting a length of a
standard WS2812B LED strip and mounted in a
3D-printed holder with protrusions to keep the
LEDs fixed in place,” he says. “Lighting one of
outer LEDs red indicates the seconds, and a green
one indicates the minutes. I found that lighting
the two LEDs to either side of the minute LED
improved the readability.”
Harry also created an inner ring of LEDs divided
The saucer was into twelve segments, and one of these is lit in
designed in Fusion blue to indicate the hour. He then lit up some
360 and its numerous
parts were then hour markers on twelve of the outer 60 LEDs,
3D-printed; the STL
making it easier to track the positions of the
files are on Thingiverse:
magpi.cc/flyingsaucerstl minute and second LEDs. Harry chose a Raspberry

18 magpi.cc Flying Saucer Clock and NAS

 PROJECT SHOWCASE

Transparent levers attached

to push-buttons can be
pressed to switch between
different lighting effects

The LEDs act as a Tix-style

clock: red to show seconds,
green for minutes, and light
blue for the hour

The body panels and LED Quick FACTS

diffusers were 3D-printed
and then assembled > The Flying Saucer
is 400 mm in
diameter

Pi 4 to drive the LEDs as he was “really excited by F ailure can be expensive > It’s lit up by a total
of 84 NeoPixels
the capabilities of [its] full-speed Ethernet and
USB 3 ports.” when the weight of > The twelve body
The Flying Saucer’s NAS file-sharing
functionality comes by way of two 3.5-inch drives, filament in the project is panels were
printed in vertical
secreted inside, and a fairly simple Samba setup.
“I have created different file share areas for work, just short of 2 kg! orientation

family members, and storage for my Linux-based > See how Harry
satellite TV/PVR receiver,” reveals Harry. made it here:
magpi.cc/
flyingsaucernas
Udderly ingenious!
Harry says that the feedback from family and
> Harry has around
friends has been very positive, but, he’s not twelve Raspberry Pi
finished there with his flying saucer. “There is boards around the
another ring of twelve RGB LEDs on the bottom house, including
of the UFO. These all face inwards and the final one controlling his
effect runs these in a slow pulsating pattern. With central heating
a semi-transparent cup that I borrowed from
my daughter, it makes a really convincing beam
effect that appears to ‘travel’ down the cup as the The two NAS disk
drives and Raspberry
light intensifies. I am going to use this together Pi are housed within
the saucer, powered
with a 3D model of a cow for the ‘traditional’ cow
by a 12 V PSU via
abduction effect.” three buck converters

Flying Saucer Clock and NAS magpi.cc 19

 PROJECT SHOWCASE

Chamber:
Sourdough
Incubator
Having issues with your sourdough starter? Read on and be inspired…
here’s a radical baker using his loaf. Nicola King delves into the dough

W
hen maker, and baker, Trent Fehl first
started making sourdough bread, he
realised that keeping the starter at the
correct, steady temperature could be a bit of a
minefield. “I read all about different techniques for
keeping a culture alive – of the different conditions
to monitor, temperature was chief,” he tells us.
“Bakers have all sorts of tricks to achieve that
Trent Fehl
MAKER

temperature. Some have a spot on their kitchen

US-based Trent counter-top they like, others prefer an oven
is a maker (turned off) with the light on, but many recommend
with electrical
specialised proofing boxes. What struck me was
engineering training
and a love for that only one of these options allowed you to set
writing software. His the temperature and you could only control to The fruit of Trent’s labours: a delicious sourdough loaf
personal projects temperatures higher than ambient.”
are often inspired
by his experiences
had given him the idea on a camping trip. “He
outside of tech – All you knead to know happened to be a spacecraft thermal systems
most often cooking, Trent decided to take on the challenge of designing engineer and suggested using the Peltier cooler for
hiking, and cycling.
a product to meet his culinary needs, and was both cooling and heating,” says Trent. “I thought
magpi.cc/chamber sure that he wanted to incorporate a small Peltier this was so slick that I really got moving on the
cooler in his project, as his friend Scott Hutchinson project when I got home.”
So, how exactly does the incubator work? “The
Chamber utilises a Peltier cooler, also known as a
thermoelectric cooler, to either pump heat from
inside the Chamber to the outside (cooling the
interior) or to pump heat from outside the Chamber
to the inside (heating the interior),” explains Trent.
“The direction that the heat is pumped is simply
controlled by alternating the polarity of the voltage
applied to the Peltier cooler.”
He changes the temperature in the Chamber
with an H-bridge module driven by a Raspberry Pi
Zero. So, if the temperature gets too high, the fan
on the outside wall pushes the heat away, and if
too cold, another inside fan pulls warm air in. This
being Trent’s first Raspberry Pi project, he appears
A hardware block diagram of the system,
showing how everything is connected converted, saying the single-board computer “is

20 magpi.cc Chamber: Sour-dough Incubator

 PROJECT SHOWCASE

The current temperature

is shown on a mini OLED
display; two push-buttons
are used to select the
desired temperature

An exterior and interior A Raspberry Pi Zero takes

fan are used to pump heat readings from temperature
in and out of the chamber sensors and controls the fans
Quick FACTS
> Trent is looking at
turning the project
electronics into
a HAT

just such a great tool for personal projects: there is

an excellent community offering software libraries,
I realised there were more > The Chamber can
keep a steady

lots of compatible hardware, and helpful guides.” people with this problem temperature
between 16

You say sour, I say sauer than I originally thought and 28°C

> The software
It’s true that bakers can buy proofing boxes,
for the project is
but Trent thinks that his incubator has clear and various peppers. I’m proud to report that
written in C++
advantages over commercially available everything has tasted good.”
> See the GitHub
alternatives. “The big advantage my chamber Trent demonstrated his Chamber at the 2019
page for code and
offers is heating and cooling in one package; plus Hackaday Superconference, and got a brilliant
details: magpi.cc/
it might be cheaper. Some of the off-the-shelf, response from like-minded makers. “Right at the chambergit
heat-only options are almost $200 new, while start of my talk I said something like, ‘for those of
> Trent is
mine is ~$180.” In addition, Trent’s invention you who maintain sourdough starters, you might
experimenting with
can be used for other foodstuffs: “I enjoy baking, be familiar with specific target temperatures but machine learning
and I really enjoy eating bread, but I’d be lying no means to control to those temperatures,’ and I projects using
if I didn’t say that the mad scientist aspect of noticed that a good number of people were smiling Raspberry Pi
harnessing the power of fungi and bacteria to and nodding their heads. At that moment, I
create tasty foods didn’t draw me in… we’ve also realised there were more people with this problem
fermented jars of garlic and jalapeños, sauerkraut, than I originally thought,” he says.

Chamber: Sour-dough Incubator magpi.cc 21

 PROJECT SHOWCASE

Select from one

of many old USB
sticks and SD cards

PiVidBox
Recycling tech in a different way so that young
kids can use it. Rob Zwetsloot checks it out

W
hen it comes to recycling tech, we
usually think of upcycling and the
excellent work on Martin Mander.
Roiy Zysman took a different approach, though,
with his PiVidBox.
“My project is a simple-to-use Raspberry Pi
based media centre that even children as young as
three years old can use,” he tells us. “It provides
Roiy
MAKER

a simple, physical interface that’s based on old

Zysman
and most likely discarded hardware. It’s simple,
A software because instead of a full-blown graphical interface
developer and that may be too complicated for small kids to
product manager operate, it uses a physical interface that relies on a playing a random video from it. You can easily
now running startup
ledgerlets.com. He’s simple action of plugging in USB thumb drives to swap it out for other USB drives, as the script can
used Raspberry Raspberry Pi.” tell: “We have thumb drives with cartoons, anime
Pi in many and youth shows for our kids, but we also made a
classic projects.

magpi.cc/pividbox
 e have thumb drives with
W thumb drive with our old favourite shows when
me and my wife want to watch some reruns of
cartoons, anime, and youth nostalgic shows,” says Roiy.

shows for our kids Empowering kids

“Having three kids at home, I wanted to empower
It’s a quite ingenious bit of low-tech design, and them by giving them the ability to choose what
anyone who has seen a toddler work a DVD player video content they want to watch by themselves,”
recently will understand how physical interaction he explains. “But on the other hand, I also wanted
is something they can understand. to control what kind of content they consume rather
The system works by having the USB drive than letting them roam freely on video streaming
checked by Raspberry Pi during boot, and then services such as Netflix and YouTube. I also had a

22 magpi.cc PiVidBox
 PROJECT SHOWCASE

Plug the stick into the

USB cable and the
PiVidBox starts playing

Quick FACTS
> PiVidBox can
also take SD
Need to read an SD card? cards thanks to
Use the card reader an adapter

>  STL files are

available to 3D-print
the parts used

>  It uses OMXPlayer

to play videos
instead of
dedicated
HTPC software

>  Labels on the USB

sticks and cards are
simple images

>  All the code is

available on GitHub:
magpi.cc/pividbox

The design for the

USB and SD card
holder; download the
3D print files from
magpi.cc/usbholder

PiVidBox magpi.cc 23
 PROJECT SHOWCASE

The list of
components is fairly
simple – the only
I had the aha moment
where I was cleaning up
slightly quirky part
is a USB A male to
USB A female cable

All the code is

available on the
my desk
GitHub, including
build instructions pile of old Raspberry Pi [boards] and thumb drives
that I wanted to use for something beneficial.
“I had the aha moment where I was cleaning
up my desk, thinking of what to do with a my old
Model 1 Raspberry Pi and a bunch of old small-
capacity thumb drives (around 1GB to 2GB) when
I heard my youngest son calling me to help him
with some Baby Shark videos he really wanted
to watch.”
The system has been a success, with Roiy telling
us that his kids use it without any problems. It’s
so good in fact, he’s started using it more himself
when they go to sleep.

24 magpi.cc PiVidBox
 PROJECT SHOWCASE

Playing a video

Select a USB stick and plug it into the

01 PiVidBox. As it boots, it detects the USB drive
that has been inserted.

Future plans The 3D-printable

files for the USB and
As with a lot of projects, this is not the end of the SD card rack for this
project are available
tinkering and tweaking.
on Thingiverse
“I have dozens of ideas on how to improve this,”
says Roiy. “For example: detecting if the HDMI
connection is enabled and resume or pause based
on the status. In this case, it pauses and unpauses
the video as you switch the TV inputs. Support for
extended media formats such as MP3 (so it can
also be used to play music), adding Alexa or Google
Home support so that skipping to the next video
A video is randomly selected and played,
can be enabled by voice commands, and many 02 followed by a second video, on loop, forever.
other ideas.” Great for kids.
We might have to put together a version
ourselves for smaller relatives – and it’s easy to
do with the instructions on the PiVidBox GitHub
page: magpi.cc/pividbox.

If you want to change genre, just remove the

03 USB stick and insert another one. PiVidBox
Old USB sticks can
easily be recycled picks up on the change and begins playing anew.
in fun ways for more
storage options

PiVidBox magpi.cc 25
 SUBSCRIPTION

SUBSCRIBE TODAY
FROM ONLY £5

Subscriber Benefits
FREE Delivery
Get it fast and for FREE

Exclusive Offers
Great gifts, offers, and discounts

Great Savings
Save up to 35% compared to stores

Rolling Monthly Subscription

Low monthly cost (from £5)
Cancel at any time
Free delivery to your door
Available worldwide

Subscribe for 12 Months

£55 (UK) £90 (USA)
£80 (EU) £90 (Rest of World)
Free Raspberry Pi Zero W Kit with 12 Month upfront
subscription only (no Raspberry Pi Zero W Kit with
Rolling Monthly Subscription)

Subscribe by phone: 01293 312193

Subscribe online: magpi.cc/subscribe
Email: [email protected]
26 magpi.cc
 SUBSCRIPTION

JOIN FOR 12 MONTHS AND GET A

FREE Raspberry Pi
Zero W Starter Kit
WITH YOUR SUBSCRIPTION

Subscribe in print
for 12 months today
and you’ll receive:

Raspberry Pi Zero W
Raspberry Pi
Zero W case with
three covers
USB and HDMI
converter cables
Camera Module
connector
Offer subject to change or
withdrawal at any time

Buy now: magpi.cc/subscribe

SUBSCRIBE
on app stores

magpi.cc 27
 FEATURE

PBERRY PI
S
P RO
RA
BL EMS
SOL ED !
ND FIX ISSUES
A
DIAGNOSRE RASPBERRY PI
ON YOU OB ZWETSLOOT
WITH R SETTING UP
YOUR FIRST
RASPBERRY PI?
R
aspberry Pi is an incredible computer,
and we love using ours to experiment CHECK OUT OUR QUICKSTART
like some sort of eighties movie LED and GUIDE FOR COMPLETE STEP-
robot scientist. However, like everything, it’s not BY-STEP INSTRUCTIONS
flawless. Same with us Raspberry Pi users. Due to magpi.cc/quickstart
the unpredictable nature of mixing machine and
human nature, sometimes things go a bit wrong.
This is where this article comes in. Everyone
needs to learn how to correctly solve their
computing issues, and through this easy-to-
follow guide we’ll show you some common fixes,
starting from the basics, all the way up to more
advanced issues. Put away the soldering iron and
get ready to read.

28 magpi.cc Raspberry Pi Problems Solved

CONTENTS
30
LEMS
TESTS
FIRST
SIC PR O B
BA HES,
ODD GLITECHAVIOUR
B
UNUSUAL
LEVEL
ALWAYS CHECK THESE BEFORE
GOING ANY FURTHER…

32 01 Cables
Make sure that everything is properly

BLEMS
plugged in to your Raspberry Pi – this includes

BOOT PRON DOES

power, HDMI, USB, Ethernet, audio, etc. If in

RASPBIATART
doubt, give it a gentle jiggle in the slot and firmly
push it in. Double-check the other end of the
NOT S cables as well.

LEVEL

microSD card
02 Make sure a microSD card is inserted
properly into the underside of your Raspberry

34 Pi. Again, push it firmly in – if needed, take your

Raspberry Pi out of its case before doing this.

ORK PR OBLEMS
NETW E CT TO THE
ON N
CAN’T C K OR INTERNET 03 Monitor
NETWOR
Connect to a monitor or display and turn it
on before booting your Raspberry Pi – sometimes a
Raspberry Pi won’t output a video signal if there’s
LEVEL nowhere for it to output to.
 FEATURE

SIMP LE
TOP 10IONS FOR
SOLUTPROBLEMS
SIM PLE
EVERYONE’S A NEWBIE AT SOME POINT. HERE ARE SOME
COMMON PROBLEMS YOU MAY NEED TO LEARN ABOUT

Lightning bolt / not enough power

A telltale sign of a Raspberry Pi not
having enough power is a lightning bolt
symbol appearing in the corner of the screen, or
a peripheral/accessory not working properly.
You need to make sure you have a powerful
enough supply for your Raspberry Pi – this
means a rating of 5 V 2.5 A for a Raspberry Pi 3B+
and below, or 5 V 3 A for a Raspberry Pi 4.

Desktop does not appear

If you’ve turned on your Raspberry Pi and
are greeted with a command line instead
of the desktop, it may have been told to boot to
the command line instead. Run the command
startx to boot into the desktop, then go to
Raspberry Pi Configuration to change the option
to boot ‘To Desktop’ – under the System tab.

Camera not detected

Using a Raspberry Pi Camera Module Reusing a microSD card
is usually straightforward. However, if Once upon a time, you were pretty easily
it won’t respond to commands then it may able to transfer a working microSD card
likely be a couple of things. First of all, check from one Raspberry Pi to another.
it’s plugged in the correct way. Only one side Unfortunately, that doesn’t always work any
of the ribbon cable has silver connectors and more, and you’ll be forced to reinstall Raspbian
they need to line up with the connectors in the (or your preferred OS) onto the card – see page
Camera slot. Secondly, you may need to enable 6. Make sure to back up any important files to a
the Camera in the Raspberry Pi Configuration USB stick or the cloud before doing so, though
tool – under the Interfaces tab. – it will completely wipe the card.

30 magpi.cc Raspberry Pi Problems Solved

 FEATURE

General online help Networking quick fix

Wireless LAN having issues? Ethernet causing
If you have an issue that isn’t covered
a fuss? Sometimes you just need to reboot your
here, then the best place to go is the
Raspberry Pi Forum: rpf.io/forums. It’s
Raspberry Pi. If that doesn’t work, head over to our
full of amazing and friendly people who ‘network fixes’ section on page 34.
have helped folks with many Raspberry
Pi problems. Search for your problem
first; then, if you can’t find it, start a Software doesn’t work
thread in the Troubleshooting section.
If a piece of software isn’t running properly,
then it may require an update. Open up the
Terminal and type the following two lines to update
all your software:

sudo apt update

sudo apt upgrade

GPIO pin doesn’t work

If you’re programming a button or LED or any
other component connect to Raspberry Pi’s
No picture on Raspberry Pi 4 GPIO, you need to make sure to reference the correct
We’ve all stumbled into this problem and GPIO pin. Double-check your code and wire against
spent far too long trying to fix it: long the image below. If they’re correct, you
story short, Raspberry Pi 4 likes to boot from may just need to move it to a different
the ‘HDMI 0’ output, which is the one closest to available pin.
the power port. You may just need to switch
over the cable from the other HDMI port.
3V3 power 1 2 5V power
GPIO 2 (SDA) 3 4 5V power

Code won’t run GPIO 3 (SCL) 5 6 Ground

You’ve written out your code or copied it GPIO 4 (GPCLK0) 7 8 GPIO 14 (TXD)
from the magazine and it won’t run. Ground 9 10 GPIO 15 (RXD)
What to do? You should get an error message GPIO 17 11 12 GPIO 18 (PCM_CLK)
when this happens, and it will list the problem GPIO 27 13 14 Ground
and where it happened. If you don’t understand GPIO 22 15 16 GPIO 23
the error message, make sure to check the line 3V3 power 17 18 GPIO 24
it mentions. If that doesn’t help you spot an GPIO 10 (MOSI) 19 20 Ground
error, put the error message into your search GPIO 9 (MISO) 21 22 GPIO 25
engine of choice. GPIO 11 (SCLK) 23 24 GPIO 8 (CEO)
Ground 25 26 GPIO 7 (CE1)
GPIO 0 (ID_SD) 27 28 GPIO 1 (ID_SC)
Booting quick fix GPIO 5 29 30 Ground
Having problems booting? Before you
GPIO 6 31 32 GPIO 12 (PWM0)
head over the page, try formatting and
GPIO 13 (PWM1) 33 34 Ground
then reinstalling Raspbian (or whatever OS you
prefer) and try again. While uncommon, GPIO 19 (PCM_FS) 35 36 GPIO 16
installation issues can occur. This is especially GPIO 26 37 38 GPIO 20 (PCM_DIN)
common if you’ve just installed an OS. Ground 39 40 GPIO 21 (PCM_DOUT)
 FEATURE

OT ISSUES
LVING BO
SO RASPBERRY PI NOT TURNING ON PROPERLY?
HERE ARE SOME THINGS TO LOOK OUT FOR

General online help THE ACT LED ALSO HAS SPECIFIC

PATTERNS FOR SPECIFIC FAULTS. FIND
OUT WHAT THEY ARE HERE:
Blinking ACT light magpi.cc/actled
On the opposite end of the USB and
Ethernet ports on a Raspberry Pi, you’ll
notice there are two little LEDs. The red one
shows if there’s power, while the green
one is the ACT light. If the ACT light
is blinking erratically during
bootup, it means it’s reading
the microSD card fine. If
it’s not blinking at all, it
means it can’t read the
microSD card and so
you may need to use
a new one or reinstall
your OS – see page 6.

No power LED
Very simply, this
means not enough
or no power is getting to your
Raspberry Pi. If the power supply
drops below 4.65 V, this red LED will
not light up. You may need to check your
power supply for faults, including a broken
connector, and replace it.
If you’ve checked your power supply and it’s
all working (on another device), if the problem
Raspberry Pi isn’t turning on then it’s likely the
board is broken.
Note: the first-generation Raspberry Pi
model has a polyfuse – if this gets blown, it can
reset/repair itself, but you may have to wait a
few days for this to happen.

32 magpi.cc Raspberry Pi Problems Solved

 FEATURE

Boot
documentation
Need more advanced boot solutions?
Check the documentation for Raspberry
Pi on the Raspberry Pi website here:
magpi.cc/bootdocs

Raspberry Pi Zero
Power problems
Raspberry Pi Zero only
has an ACT LED, so
you will need to check your
power supply if it won’t boot
up. We suggest trying the
power and microSD card on
another Raspberry Pi when
in doubt.

Composite video
Raspberry Pi can
output a composite video
signal via the 3.5 mm headphone
jack. If you’re using an older pre-installed
NOOBS card, or still have some lying around,
it’s good to know that holding the number 3 key
on a connected keyboard will force it to output via
the composite output if that’s what you’re using. If NOOBS issues
you’re in the US or another NTSC country, hold Not all versions of NOOBS work correctly
the 4 key instead. with all Raspberry Pi Zero models. Instead
of relying on NOOBS for your Raspberry Pi Zero,
you should use the new Raspberry Pi Imager
Corrupt microSD card software to install Raspbian to a microSD card.
While uncommon, microSD cards can You can find it at magpi.cc/imager. See page 6
sometimes become corrupted while being used of this issue for more details.
in a Raspberry Pi. Unfortunately, there’s no solution
to this other than getting a
new microSD card, so make
sure to back up your card
regularly. You can do this by
saving any important files, or
even by making an image from
your current card. We have a
video on how to do this here:
magpi.cc/backupvid

Raspberry Pi Problems Solved magpi.cc 33

 FEATURE

ORK FIXES
NETW
CAN’T CONNECT TO YOUR LAN? NO INTERNET?
HERE ARE SOME THINGS YOU CAN DO
Desktop does not appear
If you don’t have a wired connection
handy, you can add settings for your
wireless network onto the boot folder of a
Raspberry Pi microSD card. Create a file there
called wpa_supplicant.conf and add your
network details like so:

ctrl_interface=DIR=/var/run/wpa_
supplicant GROUP=netdev
Understanding network symbols update_config=1
The network symbols in Raspbian are country=<Insert country code here>
pretty easy to read, and there are three
with which you should be familiar. The first network={
symbol is two grey lines with a red X on opposite ssid="<Name of your WiFi>"
ends – this denotes no network connection of psk="<Password for your WiFi>"
any kind. Two blue arrows facing in opposite }
directions means you have a wired connection
working, while the circle with waves emanating
from it means you have a wireless connection.

Speed differences
Different Raspberry Pi models have
different connection speeds, especially
on Ethernet connections. Raspberry Pi 3 and
below max out at about 100Mbps as they use a
100MB adapter over USB. Raspberry Pi 3B+ is
roughly 280Mbps, as it has a Gigabit Ethernet
connection on a USB 2 line. Raspberry Pi 4,
however, is a full gigabit. If you’re having
speed issues, make sure your router or switch
supports up to the speeds you’re expecting, and
test with different Ethernet cables.

34 magpi.cc Raspberry Pi Problems Solved

 FEATURE

Wireless testing
There are a lot of things
that can interfere with
your wireless reception in
your home. Distance from
your router, interference from
neighbours, walls, and even
just too many people on the
same channel. We like to use
apps like Wifi Analyzer to test
locations around our home
to find out the best spots to Networking
place wireless devices such as a
Raspberry Pi.
documentation
Not finding your problem here? Check
the configuration documentation for
SSH connection more info on networking with Raspbian
and Raspberry Pi: magpi.cc/configdocs
Many security precautions have been
implemented in the last couple of years to
make sure Raspbian and Raspberry Pi are more
secure – this includes making sure people change
the password on their Raspberry Pi, and keeping
SSH off. You can turn it on from the Interfaces tab
in Raspberry Pi Configuration – or, if you’re using
a headless Raspberry Pi, simple place an empty file
called ssh in the boot folder of the microSD card.

Wired Raspberry Pi Zero

Raspberry Pi Zero does not include an Ethernet
port. However, if you need to use a wired
connection, you can always use a USB Ethernet
Networking
dongle. It may not be as speedy as other Raspberry Pi booting and PoE
models, but it will do the job. Raspberry Pi 3/3B+ and 4 support
network booting, and Raspberry Pi 3B+
and 4 even support Power over Ethernet
Raspberry Pi Zero and A gadget issues with the PoE HAT.
A workaround for a lot of people wanting a These are advanced methods and
have some issues you might come
portable, network connected computer is to put
across, such as DHCP timing out, ARP
it into ‘gadget’ or USB boot mode. If you’re having
check failing, and others. For full details
trouble and want to deactivate it, either flash the on how to set it up and troubleshoot, we
microSD card (see page 6) or head to the usbboot suggest heading to the network booting
documentation to fix your setup: magpi.cc/usbboot documentation here: magpi.cc/netboot

Raspberry Pi Problems Solved magpi.cc 35

This stunning 224-page hardback book not only tells
the stories of some of the seminal video games of
the 1970s and 1980s, but shows you how to create
your own games inspired by them using Python and
Pygame Zero, following examples programmed
by Raspberry Pi founder Eben Upton.

Get game design tips and

tricks from the masters

Explore the code listing

and find out how they work

Download and play game

examples by Eben Upton

Learn how to code your own

games with Pygame Zero

Available now
magpi.cc/codetheclassics
 TUTORIAL

Getting started with

Part 02

electronics: Sensors
One of the great things about Raspberry Pi is that it has GPIO
pins to attach your own electronic circuits

I
n this tutorial, you will learn how to sense The thermometer project
both temperature and light, using your
Install the code
Simon
Raspberry Pi and a few simple components.
01
MAKER

One project will allow you to measure temperature Before fetching the code from the internet,
Monk
using a component called a thermistor, and the you should run Mu, which you will find in the
Simon divides other project acts as a rudimentary light meter. Programming section of your main menu. If it’s
his time between Both display their readings in a window on your not there, update your system to the latest version
writing and Raspberry Pi’s screen using the guizero Python of Raspbian (magpi.cc/raspbianupdate).
designing products
for MonkMakes
library (magpi.cc/guizero). Running Mu ensures that the mu_code
Ltd. Some of his Both projects also make use of the PiAnalog directory is created, into which we will now copy
better-known books (magpi.cc/pianalog) Python library that lets the program code. To do this, open a Terminal
include Programming
you connect analogue sensors to Raspberry Pi window and run the commands:
Raspberry Pi (TAB)
and The Raspberry Pi without special hardware.
Cookbook (O’Reilly). Although these projects sense temperature wget http://monkmakes.com/downloads/pb1.sh
simonmonk.org and light, you could easily adapt them to use sh pb1.sh
other types or resistive sensor, including stress
sensors, variable resistors, and even some types This will copy the programs used in this tutorial into
of gas sensor. the mu_code directory, along with some others.

You’ll Need Figure 1

> The Mu
Python editor
codewith.mu
> Solderless
breadboard

> 3 × Female-to-male

jumper wires

> 2 × 1 kΩ resistors

> NTC thermistor

> NPN phototransistor

(visible light
wavelength)

> 330 nF capacitor


Figure 1 The thermometer wiring diagram

38 magpi.cc Getting started with electronics: Sensors

 TUTORIAL

Jumper wires with sockets on The time taken for the capacitor to
one end and pins on the other are charge up through the thermistor is
used to connect the GPIO pins of used to calculate the thermistor’s
Raspberry Pi to the breadboard resistance and hence its temperature

A thermistor is a special
type of resistor whose
resistance changes as
its temperature changes
Solderless breadboard is
used to hold the electronic
components and connect
them together

A GPIO template makes it easier

to find the correct pin when you
are connecting things together

05_thermometer.py
In this project, none of the > Language: Python 3
components needs to be a
001. # 05_thermometer.py
particular way around 002. # From the code for the Box 1 kit for the Raspberry Pi by
MonkMakes.com
003.
Place components 004. from PiAnalog import *
02 onto breadboard 005. from guizero import App, Text
Using Figure 1 as a reference, push the jumper wires 006. import time
into the breadboard at the positions shown. Bend the 007.
resistor legs so that they fit into the holes. 008. p = PiAnalog()
The five holes in each row on the breadboard 009.
are connected together under the plastic, so 010. # Update the temperature reading
it’s very important to get the correct row for 011. def update_temp():
your component leg. In this project, none of the 012. temperature = p.read_temp_c()
components needs to be a particular way around. 013. temperature = "%.2f" % temperature # Round the
temperature to 2 d.p.
014. temp_text.value = temperature
015. temp_text.after(1000, update_temp)
Connect breadboard 016.
03 to Raspberry Pi 017. # Create the GUI
Again, using Figure 1 as a reference, connect the 018. app = App(title = "Thermometer", width="400", height="300")
GPIO pins on Raspberry Pi to the breadboard. A GPIO 019. Text(app, text="Temp C", size=32)
template will make this easier – if you don’t have 020. temp_text = Text(app, text="0.00", size=110)
one, you’ll need to carefully count the pin positions. 021. temp_text.after(1000, update_temp) # Used to update the
It doesn’t matter what colour jumper wires you use, temperature reading
but if you stick to the colours used in the diagram, 022. app.display()
it’s easier to check that your wiring is correct.

Getting started with electronics: Sensors magpi.cc 39

 TUTORIAL

Figure 2
Top Tip if Beta is 3800 and R25 is 1 kΩ, you would use:
p.read_temp_c(3800, 1000).
After a few seconds, a window will appear, like
Using a the one in Figure 2, displaying the temperature.
photoresistor If you would rather have the temperature
displayed in degrees Fahrenheit, then run the
You can also use a
program 05_thermometer_f.py instead.
1 kΩ photoresistor
(sometimes
called an LDR –
light dependent
resistor) in place of Changing the temperature
the phototransistor. 05 The easiest way to change the temperature
Photoresistors
of the thermistor is to pinch it between your
are becoming
less common in fingers so that your body warmth heats it up. You
projects as they 
Figure 2 Displaying the temperature using guizero should see the temperature steadily increase and
contain cadmium, then decrease back to room temperature when you
an element Running the program
whose use is 04 Load and run the 05_thermometer.py
let go of the thermistor.

restricted in the
program using Mu. The code is configured for the
RoHS (Restriction
of Hazardous thermistor supplied with the MonkMakes Project Light meter project
Substances) Box 1 kit. If you look near the top of the file, you
Disconnect the breadboard
legislation.
Don’t worry: a
will see the line: temperature = p.read_temp_c().
If you are using your own thermistor, you will
01 This project has almost the same layout as
photoresistor is need to add two new parameters to the method the thermometer, and we are just going to swap
not dangerous
call. The first parameter is the value of Beta for the thermistor for a phototransistor, but it is still
to touch, as it’s
the thermistor, and the second the value to R25 a good idea to disconnect the breadboard from
all sealed up
in plastic. (resistance at 25°C). You will find both of these your Raspberry Pi. First, pull the jumper wires off
values in the thermistor’s datasheet. For example, the GPIO pins on Raspberry Pi and then take the
thermistor off the breadboard.

If you are using your own

thermistor, you will need to
Place phototransistor
add two new parameters 02 onto breadboard
This time, using Figure 3 as a guide, put the
to the method call phototransistor legs into the breadboard. The

Figure 3


Figure 3 The light
meter wiring diagram

40 magpi.cc Getting started with electronics: Sensors

 TUTORIAL

A schematic diagram for

using resistive sensors 3
with Raspberry Pi
1. A
 s a capacitor fills with charge, its voltage increases; when this
reaches about 1.6 V, it will appear as HIGH on Raspberry Pi’s
GPIO pin acting as a digital input. If under 1.6 V, it will appear as
LOW on the digital input

2. B
 efore we can use the capacitor (C) to measure the resistance of
the sensor, it first needs to be discharged (emptied). To do this, 2
GPIO 18 is set to be an input (so almost no current flows through
it) and GPIO 23 is set to a digital output at 0 V. This discharges C
through resistor R2
4
3. H
 aving used GPIO 23 and R2 to discharge the capacitor, GPIO 23
is set to be an input (to monitor the voltage of the capacitor) and
GPIO 18 is now set to be a digital output at 3.3 V. The capacitor
(C) will now start to charge and the voltage across it will steadily 1
increase at a rate that depends on the resistance of R1 (fixed) and
the sensor (varying with temperature/light/etc. depending on the
sensor type)

4. O
 nce the voltage across the capacitor and therefore at GPIO 23
reaches about 1.6 V, the input is read as high by the monitoring
Python program, and the time taken for this to happen is used
to calculate the resistance of the sensor

phototransistor must go the correct way around:

DOWNLOAD
the longer leg should go to row 4.
08_light_meter.py THE FULL CODE:
> Language: Python 3 magpi.cc/pibox1git
Connect breadboard to
03 Raspberry Pi 001. # 08_light_meter.py
Using Figure 3 as a reference, connect the GPIO 002. # From the code for the Box 1 kit for the Raspberry Pi by
pins on Raspberry Pi to the breadboard using three MonkMakes.com
female-to-male jumper wires. 003.
004. from guizero import App, Text
005. from PiAnalog import *
006. import time, math
Running the program 007.
04 To use the light meter, load and run the 008. p = PiAnalog()
program 08_light_meter.py in Mu. When the 009.
program starts, a window like that in Figure 4 will 010. def light_from_r(R):
appear, showing the light level. Try shading the 011. # Log the reading to compress the range
phototransistor with your hand or shining a light 012. return math.log(1000000.0/R) * 10.0
on it to see how the readings change. 013.
014. # group together all of the GUI code
Figure 4 015. # Update the reading
016. def update_reading():
017. light = light_from_r(p.read_resistance())
018. reading_str = "{:.0f}".format(light)
019. light_text.value = reading_str
020. light_text.after(200, update_reading)
021.
022. app = App(title="Light Meter", width="400", height="300")
023. Text(app, text="Light", size=32)
024. light_text = Text(app, text="0", size=110)
025. light_text.after(200, update_reading)
026. app.display()

Figure 4 Displaying the light level

Getting started with electronics: Sensors magpi.cc 41

 TUTORIAL

Tweet with Morse code

If your keyboard has you bored, why not learn Morse and then
be able to send tweets using nothing but a simple switch?

W
Configure and update
hen Samuel Morse created his
communication system in the mid-
02 This project has several steps, so don’t
1800s, it revolutionised wireless worry if you just want to practise Morse code –
PJ Evans
MAKER

communication. The original idea was that we’ll get to that first. If you want to complete
PJ is a writer and simple electronic pulses could be sent further everything here, you’ll need to set up an internet
software engineer and more reliably than voice, and so the Morse connection (wireless or wired) and enable I2C,
who seems to
alphabet was used to describe each letter and which is used to communicate with the LCD screen.
want to make
communicating with number as a combination of short pulses (dots) By running sudo raspi-config from the command
the outside world and long pulses (dashes). line, you can enable WiFi under ‘Network Options’
as challenging Learning Morse code is a challenge, but can be and I2C under ‘Interfacing Options’.
as possible.
rewarding and a lot of fun. As an introduction to Whatever it is that you’ve decided to do, always
@mrpjevans this classic way of communicating, we’re going to make sure you’ve updated the system by running
build a tweeting Morse code key. We’ll learn how sudo apt update && sudo apt upgrade. This may
to interpret input and also how you can create take some time; once complete, it’s important you
more complicated projects by breaking them reboot so that I2C is properly enabled.
down into small pieces.

You’ll Need
Get switched on
Let’s get set up 03
> Small breadboard
magpi.cc/ 01 First, select the right Raspberry Pi
Let’s try to emulate the Morse key by
using a tactile switch. These widely available and
minibreadboard
model for the job. Of course, we would heartily inexpensive switches make a satisfying ‘click’
> Tactile switch recommend a Raspberry Pi 4, but in fact this when pressed (hence the name). They have four
magpi.cc/switches project will not be too demanding on even the pins – two pairs that are connected on the longer
> Adafruit 16×2 oldest models, so it is great for upcycling an older side, so the switching is done between those with
LCD Keypad Kit Raspberry Pi computer. In fact, it will even work the shorter gap. Bearing this in mind, place the
(optional) with the original Model A and B. switch into the breadboard so the longer edge
magpi.cc/keypadkit
Start by installing the latest version of follows the connected rows. Don’t worry if you
> Morse key Raspbian. We’ve no need for a graphical user make a mistake: nothing can be damaged. Now
(optional) interface, so you can use Raspbian Lite if you connect the breadboard to your Raspberry Pi’s
magpi.cc/morsekey
wish; whatever is most comfortable. We’ll be GPIO. Run jumper leads on each side of the switch
> Twitter account doing everything in the command line. to the last two pins at the end (nearest the USB
(optional) ports) of the GPIO header: GND and GPIO 21.
twitter.com
> Jumper wires

Coding time
04 Once you’ve checked all your connections,
create a new file called morse.py in your favourite
editor and enter the code listed here. You can
also download it from magpi.cc/twitterkey if
This popular display
means we can see you don’t fancy the typing. The code will listen
our Morse code
for changes to the button’s ‘state’ (whether it is
without the need for
a monitor pressed or not) and measure the time differences

42 magpi.cc
 TUTORIAL

This training key can be

added to create an authentic
This 16×2 LCD display
Morse code experience
shows us the output
from our practice

to work out whether you made a ‘dot’ or a ‘dash’.

Figure 1
It will then convert the pattern into a letter and
display it on the screen.
First, install these dependencies (libraries that
help us):

sudo apt install python3-pip

pip3 install gpiozero

Then run python3 morse.py.

Practise dots and dashes

05 Using the chart printed here (Figure 1),
see if you can spell your name out by clicking
the button. Use a quick press for a ‘dot’ and a
slightly longer press for a ‘dash’. Leave the button
untouched for a slightly longer time to tell the code
you’ve finished your letter. Once you’re happy
everything is working and you’ve had some fun,
CTRL+C will stop the program.
If you’re not happy with the timings, you can
adjust them to suit your ‘fist’ (the name operators
give their style of keying). You can adjust the
timings for a dot, dash, and interval between
letters by changing the timings in the variables
dot_timeout and dash_timeout at the start of the 
Figure 1 The Morse code alphabet. Although it appears random, there is an
code. Don’t be afraid to experiment. underlying structure that helps you understand and memorise the patterns

Tweet with Morse code magpi.cc 43

 TUTORIAL

Build the LCD Version 2

Top Tip 06 To allow us to create Morse code without
08 It’s time for a more advanced version of our
the need for a full display, we’ve selected a bright, original code. This one is a bit longer, so download
Learning Morse crisp and slightly-retro LCD screen from Adafruit. lcd_morse.py from magpi.cc/twitterkey. This
These popular panels normally require a lot of time we’re reading input from the LCD’s on-board
There are many GPIO pins to be driven natively, but this HAT uses tactile keys, so the code needs to be a bit different.
resources online
an input extender so that only two pins are needed. The time measurement variables are still there.
that will help
Better yet, it comes with five tactile switches on- Run it using python3 lcd_morse.py.
you understand
how Morse code board so we can use them for input. You should be able to key away and see the
is structured. This LCD kit arrives unassembled, so it’s time interpreted letters appear on screen. You now have
Start with to get the soldering iron out. There are excellent a functioning standalone Morse code trainer.
learnmorsecode.info assembly instructions at magpi.cc/lcdkitinfo. As
always, read through them before doing anything
and take your time.
Let’s tweet
09 We’d like to be able to send our messages
to Twitter. For security reasons, we need to create
Set up the display
07 Once your display is assembled, you can
a Twitter ‘application’ which gives the code
unique credentials for posting on our behalf.
attach it to your Raspberry Pi (make sure the latter We’re using the python-twitter library – see
is switched off!). Due to the close proximity of magpi.cc/pytwitterinfo for an excellent tutorial
some of the resistors, cover the top of the USB on how to set it up. You will be given four strings:
ports and Ethernet port with insulation tape if they a consumer key, consumer secret, access token,
are close to the PCB of the display. and access token secret. Enter all the values in
Test the display is working by installing its the equivalent variables in the first few lines of
Python libraries: lcd_morse_twitter.py (download the code from
magpi.cc/twitterkey). Now save the file.
sudo pip3 install adafruit-circuitpython-charlcd

Now create a new file called lcd.py and enter

Tweet with Morse!
the code from the listing here. Save it and run it
using python3 lcd.py. The display should show
10 Run python3 lcd_morse_twitter.py. As
your message. If it lights up but you can’t see before, you can construct your message by tapping
anything, adjust the ‘Contrast’ potentiometer on the right-hand cursor button of the LCD
until the text appears. display. Your message will be displayed at the top,
and the current dots and dashes in the ‘buffer’ at
the bottom. Made a mistake? No problem: click the

lcd.py left-hand cursor to delete the previous character

or the ‘up’ key to delete the entire message and
start again. When you’re happy, click on ‘Select’ to
> Language: Python 3 send. Your message will be posted to your account
for all of Twitter to read.
001. import board
002. import busio
003. import adafruit_character_lcd.character_lcd_rgb_i2c as
character_lcd Add a Morse key
004. lcd_columns = 16
11 Let’s take the authenticity up a notch by
005. lcd_rows = 2 adding a real Morse key. These keys are nothing
006. i2c = busio.I2C(board.SCL, board.SDA) more than a simple on/off switch. That said, some
007. lcd = character_lcd.Character_LCD_RGB_I2C(i2c, can be surprisingly expensive as they are built
lcd_columns, lcd_rows) using precision components to allow the operator
008. lcd.color = [100, 0, 0] to go faster and faster with fewer mistakes. We’ve
009. lcd.message = "Hello\nFrom MagPi" selected a more affordable training key that has two
contacts that can be directly connected. To use the

44 magpi.cc Tweet with Morse code

 TUTORIAL

morse.py DOWNLOAD
THE FULL CODE:
> Language: Python 3 magpi.cc/twitterkey

001. from gpiozero import Button 024.

002. import time 025. # If we've timed out and there's been previous
003. keypresses, show the letter
004. button = Button(21) # GPIO Pin 40 026. if button.is_pressed is False and
005. dot_timeout = 0.15 len(current_letter) > 0:
006. dash_timeout = 1 027. print("\nMorse: " + current_letter)
007. current_letter = "" 028. if current_letter in morse:
008. 029. print("Letter: " + morse[current_letter])
009. morse = { 030. else:
010. ".-": "A", "-...": "B", "-.-.": "C", "-..": "D", 031. print("Not recognised")
".": "E", 032. current_letter = ""
011. "..-.": "F", "--.": "G", "....": "H", "..": "I", 033.
".---": "J", 034. elif button.is_pressed:
012. "-.-": "K", ".-..": "L", "--": "M", "-.": "N", 035.
"---": "O", 036. # The key has been pressed, work out if it's
013. ".--.": "P", "--.-": "Q", ".-.": "R", "...": a dot or a dash
"S", "-": "T", 037. button_down_time = time.time()
014. "..-": "U", "...-": "V", ".--": "W", "-..-": 038. button.wait_for_release()
"X", "-.--": "Y", 039. button_up_time = time.time()
015. "--..": "Z", ".----": "1", "..---": "2", 040. button_down_length = button_up_time -
"...--": "3", "....-": "4", button_down_time
016. ".....": "5", "-....": "6", "--...": "7", 041.
"---..": "8", "----.": "9", 042. # Was it a dot or dash?
017. "-----": "0" 043. if button_down_length > dot_timeout:
018. } 044. print('-', end='', flush=True)
019. 045. current_letter += '-'
020. while True: 046. else:
021. 047. print('.', end='', flush=True)
022. # Wait for a keypress or until a letter has been 048. current_letter += '.'
completed 049.
023. button.wait_for_press(dash_timeout) 050. time.sleep(0.1)

existing code, solder two wires to the underneath of

the rightmost tactile switch on the LCD board and Top Tip
connect them to the key using its screw terminals.
Now you can key away using the real thing! Make a key
If you don’t fancy the expense of buying
a Morse key, you can make your own!

Going further magpi.cc/diymorsekey

12 Now you have the basics as Python code,
you can repurpose your tweeting Morse key for
anything you can imagine. Add a second key and
create Morse code challenge games. How about
Morse code hangman? Add timing in to see how
many letters per minute you can key. Could two
identical setups send messages to each other?
Although initially challenging, learning Morse
code is rewarding and can inspire operators to go
on to the rich and fascinating world of amateur
radio. Over to you.

Tweet with Morse code magpi.cc 45

 TUTORIAL

Use Swarm with

Part 02

Raspberry Shake
seismographic data
Use your Raspberry Shake (or tap into the Shake community)
and work with seismographic data using Swarm

I
Open Raspberry Shake
n the previous tutorial, we looked at setting
up Raspberry Shake, a geophone-based
01 We’re going to use two Raspberry Pi devices
earthquake detector and checking out in this tutorial. The first is used in our assembled
Lucy
MAKER

data with the web-based ShakeNet service: Raspberry Shake unit (currently sitting in our
Hattersley magpi.cc/shakenet. conservatory). The second is used to remotely
Our shake has been running for a while now and access the Raspberry Shake and investigate its
Lucy is editor of The
MagPi magazine we’ve gathered together some data on earthquake data. You can perform much of this tutorial
and likes to explore activity in our local area. We don’t live in an using another Linux, Windows, or Apple macOS
science and data earthquake-prone part of the world, but it’s computer if your only Raspberry Pi is being used
with Shake and
Raspberry Pi. good citizen science and we can tap into other as Raspberry Shake.
Raspberry Shake devices around the globe. With both your computer and Raspberry Shake
magpi.cc
In this tutorial, we’re going to take a closer look on the same network, Start by opening the web
at the data provided by Raspberry Shake devices. browser and navigate to:
We’ll delve into how data is measured, stored, and
what you can do with it. We’re going to look at a rs.local/
You’ll Need helicorder and using Swarm to analyse live data.
This will open the Raspberry Shake Config window.
> A
 ssembled Figure 1
Raspberry Shake
(or you can
access somebody
Open helicorder
else’s data)
02 Click on the helicorder icon (shaped as
> R
 aspberry Pi
four wavy lines) in the bottom left of the window.
> R
 aspbian OS You will see 14 blue links, each with a date-stamp
followed by either (12) or (00). These represent
Raspberry Shake readings for the last seven days,
split into 12-hour blocks. The ones marked ‘(00)’
are for the morning hours (midnight to midday),

Figure 1 The
Helicorder displays while the ‘12’ ones are for evenings (midday
seismic activity for to midnight).
twelve hours. Each
hour is divided into Click on one of the links to view the helicorder
four horizontal lines for that time frame. It’ll look like the image
(coloured black, red,
blue, and green). in Figure 1. The latter shows seismic data for
Each coloured line
12 hours. Each line represents 15 minutes of
represents a quarter-
hour of activity recording, and the lines vary in colour (black, red,

46 magpi.cc Use Swarm with Raspberry Shake seismographic data

 TUTORIAL

The main window displays a

helicorder from a Raspberry
Shake. Select a point on the
The Data Chooser sidebar enables you to helicorder to display the Inset
select a Raspberry Shake on your local panel, here shown in Spectra
network, and also view other Raspberry view, but Wave and Spectrogram
Shake devices sharing their data views are also used

blue, and green). Down the left, you will see the
time local to your area; to the right, you’ll see UTC
E ach line represents 15
(Coordinated Universal Time). Our Shake unit is minutes of recording, and
located near the Prime Meridian, so both times
are the same. they vary in colour (black,
Look along the lines to view seismic activity.
Lines will typically be stable, and more motion red, blue, and green)
could indicate somebody walking nearby, or other
motion. Take a look this Maryland Geological retrospectively adjust the previous recordings. So
Survey website for more information on how to you will need to wait until the end of your 12-hour Top Tip
read helicorder records: magpi.cc/readhelicorder. recording for a fresh helicorder to display wholly
adjusted results. StationCode
The StationCode
Adjust helicorder scaling is generated
03 Swarm automatically
We found our helicorder settings initially
too intense (see Figure 2); conversely, you may find
04 The helicorder is not updated in real-time.
by using the last
four digits of
the helicorder on your Shake to be too mild. Either For real-time data, you’ll need to use another app. the Raspberry
way, you won’t be able to determine between There are many third-party apps available for data Pi computer’s
different periods of intensity. analysis, but Swarm (Seismic Wave Analysis / Real- unique hardware
Head into your Shake settings and adjust the time Monitoring) is the most commonly used by address
Helicorder Scaling Value to fine-tune your settings. Raspberry Shake owners. (commonly
referred to
Click on the Settings icon at http://rs.local and Swarm was developed by the USGS Volcano
as the ‘MAC’
choose the Data tab. Adjust the Helicorder Scaling Hazards Program (magpi.cc/usgs) and is the most
address) and
Value. The default setting is 0.5; adjust it down to widely used seismological application in the world. appending them
0.1 if the display is too intense, and up to 1.0 if it is Swarm is available for Linux, macOS, and Windows to the letter “R”.
too mild. You can fine-tune the levels to your taste operating systems, and Raspberry Shake provides a magpi.cc/
as you go. version that is preconfigured for Shake devices. stationcode
Click Save and Restart to put the new settings In the case of Swarm, you can also connect to
in place. the Raspberry Shake Community server to see
The helicorder will start displaying new waveforms from all of the other Raspberry Shakes
recordings using the new scaling value, but will not in the world.

Use Swarm with Raspberry Shake seismographic data magpi.cc 47

 TUTORIAL

Download Swarm
Top Tip 05 Visit rs.local in your web browser and click
myShake to reveal further subfolders, then click
the ‘+’ sign next to AM to reveal the StationCode
the SWARM Download button. Open a Terminal for your Raspberry Shake. Ours is R2E51.
Get the manual window and navigate to the Downloads folder: Double-click on the StationCode and the main
window will display a helicorder. This time,
Download the cd Downloads/ however, the lines will be blue, with darker blue
Swarm V3 User
and red colours used to indicate heavy periods
Manual and
Now unzip the downloaded swarm folder and move of activity. Each line represents a half-hour of
Reference Guide
directly from the the unzipped folder to your home folder: activity, and the helicorder displays live data.
USGS website.
magpi.cc/ unzip swarm-3.0.1
swarmpdf mv swarm-3.0.1 ~
The inset window
(If Swarm has been updated, replace the file name
08 Click on any part of the helicorder to open
with the appropriate latest version.) the Inset window. This shows a zoomed-in area
of the helicorder. The first time you click on it, it
will be in Wave view (this is the helicorder wave
expanded to make it easier to view). Right-click
Open Swarm
06 Now open the swarm folder in your home
with the mouse to switch to Spectra view; right-
click again to view a Spectrogram. Icons in the
folder and run the swarm.sh file script to start Status bar above the helicorder are also used to
the program. change views.

cd ~/swarm-3.0.1
sh swarm.sh Y ou can see the strength
If you are using a Windows computer, you will
of seismic activity in
need to install Java first (magpi.cc/javawindows)
and then run Swarm by double-clicking the
specific GHz bands
swarm_console.bat file.
Spectrogram view
09 The Spectrogram view displays the
frequency of waveforms concerning time and
Access your Raspberry
Figure 2 Our
helicorder setting 07 Shake in Swarm
amplitude (or power). The X-axis (horizontal) of
the spectrogram relates to time (as with a regular
was too intense,
requiring the When you first open Swarm, it will display a blank helicorder plot); the Y-axis (vertical) relates to
Scaling Value to be
reduced so values
blue window; to the left, a sidebar will display the frequency of the wave. A third data point is
could be inspected myShake and RS Community folders. Double-click displayed via the colour of the points on the graph:
blue is for the weakest energy, and red is for the
strongest. So you can see the strength of seismic
Figure 2 activity in specific GHz bands. The Spectrogram
is a very powerful tool for understanding the
seismic activity.
Ben Ferraiuolo has written a great article called
‘How to understand spectrograms’, which can
be used to get a better understanding of how to
interpret this data (magpi.cc/spectrograms).

Helicorder view settings

10 All the settings for the helicorder view can
be manipulated in the helicorder view settings
dialog, which can be opened by clicking on the

48 magpi.cc Use Swarm with Raspberry Shake seismographic data

 TUTORIAL

Figure 3

Figure 3 The
Spectrogram displays
the frequency
of waveforms
concerning time, and
the colour of the data
points indicates the
amplitude (power) in
that frequency

View another Raspberry Shake

Helicorder View Settings button in the status bar.
The ‘X, minutes’ option adjusts the length of
12 By now you should have a good
time each horizontal waveform represents (the understanding of how Swarm is used to distil
default is 15 minutes), while the ‘Y, hours’ option seismic data. However, you can also use it to access
determines how many hours are represented on a other Raspberry Shake devices that are sharing
screen (24 by default). their data publicly.
The Zoom option adjusts how many seconds are Double-click RS Community in the Data Chooser
displayed in the Inset panel (the default is 30; set sidebar and expand (with ‘+’) the Networks folder
this higher to get a wider view of data when you and the AM folder. This will display all Raspberry
click on the helicorder.) Shake devices on the network.
The Clipping option determines the level at Choose your Raspberry Shake underneath
which the red threshold is exceeded. Finally, the myShake and the Data Choose will display a list of
‘Refresh, seconds’ option is used to adjust the devices, sorted by distance to yours. Select one of
update frequency (by default, the heliograph is the devices and click the Map icon (at the bottom W
 e are accessing
a Raspberry Shake
updated every 15 seconds). of the Data Chooser) to view its location. Double- unit made with a
Raspberry Pi 3B+ over
click the device (or click the helicorder icon at the
a local network from
bottom of Data Chooser) to view its data. a Raspberry Pi 4.

Wave clipboard
11 You may find it useful to compare different
sections of the helicorder, or the same time using
different views: plot, spectrogram, and so on.
The Wave Clipboard is used to hold different clips
from several areas at once (even across different
Raspberry Shake models).
Choose Window > Wave Clipboard to view the
current selection (which should be empty).
Head back to the helicorder and click on an area
of interest to open the Inset Panel. Right-click
to get a View mode and click the ‘Copy inset to
clipboard’ button. The Wave Clipboard will return
to focus and now display the clipped wave. You
can add multiple waves to the Wave Clipboard and
remove them using the ‘X’ delete icon to the right
of each wave.

Use Swarm with Raspberry Shake seismographic data magpi.cc 49

 TUTORIAL

Facial recognition
Part 03

with a magic mirror

Mirror, mirror on the wall, who is the fairest of them all?
Decide with a smart face-recognising magic mirror

I
n the past two issues, we’ve built and To recap, we made a ‘budget’ version using the
configured a magic mirror using the Raspberry Pi official touchscreen, a small Ikea
PJ impressive MagicMirror2 software. Now frame, and a generous amount of gaffer tape.
MAKER

Evans we have our mirror constructed and configured Basic, but surprisingly functional. Having given
to our liking, it’s time to go to the next level of it all a bit of a polish (software speaking) in the
PJ is a writer, personalisation. Wouldn’t it be amazing if the second article, we’ll be building upon our current
tinkerer, and mirror’s display could be customised based on mirror. If you’ve gone your own way, that’s great:
enjoys installing
Raspberry Pi Zero the person standing in front of it? Wouldn’t it be the instructions will be roughly the same.
computers where even better if that could happen by the mirror
no-one asked for recognising the person standing there? Turns out,
them to be.
that’s well within the capabilities of a Raspberry
@mrpjevans Casing the camera
Pi computer. We’ll build multiple mirror
configurations that appear when the right person
02 If we’re going to add the ability to customise
is recognised. the display based on who is standing in front of it,
then we’re going to need some vision. The easiest
choice would be the official Raspberry Pi Camera
Module. It’s small, powerful, and easy to connect.
Magic up a mirror
01 This project is an enhancement to the
How you want to mount the camera to your project
is entirely your call. Here, we’ve 3D-printed a
tutorials we covered in the previous two issues of small case for the module so it fits in with its
The MagPi: 90 and 91. That means that you’re going surroundings. The small case matches the frame
to need a magic mirror before we go any further. and was easily secured with some strong tape. The
more ambitious of you may consider mounting a
camera directly in the frame.

Attach and enable the camera

You’ll Need 03 Whatever camera solution you decide to
use, you’ll need to connect it to your Raspberry
> A magic mirror!
Pi computer. If you’re using a Camera Module,
magpi.cc/90
attach the ribbon cable to the main board following
> Raspberry Pi the instructions here: magpi.cc/picamera.
Camera Module
Once connected to the board, configure it by
magpi.cc/camera
running sudo raspi-config from the command
> 3D-printed case line and enabling the camera under ‘Interfacing
(optional)
Options’. If you’ve gone with a USB webcam, see
magpi.cc/
cameracase the instructions provided with it and check for
T
 he official Raspberry Pi Camera Module is a
perfect choice for this project Raspberry Pi compatibility before purchasing.

50 magpi.cc Facial recognition with a magic mirror

 TUTORIAL

The official Raspberry

Pi Camera Module
sits above the frame

Top Tip
Screen rotation
No luck with
face recognition?
The display can be
Train, train, and
completely customised to the train again. The
person looking at the mirror more data, the
more accurate
the result.

Rotate the screen

04 The positioning of the camera may make you
with at least 2GB of memory. You can run it on
older models, but it’s a lot more complicated. See
reconsider which way around you would like the the excellent pyimagesearch.com resource for
mirror. If using the Camera Module, the provided more information. To install, run the following
ribbon cable requires that the mirror is portrait with from the command line:
the Raspberry Pi computer at the top. Changes in
graphics systems with the move to Raspberry Pi 4 sudo apt -y update && sudo apt -y upgrade
and Raspbian Buster mean the easiest way to set the sudo apt install libopencv-dev python3-opencv
screen orientation is within the Raspbian desktop
itself. Stop the MagicMirror2 software by entering
this at the command line: pm2 stop MagicMirror.
Tool up
Then, in the Desktop environment, go to the menu,
select ‘Preferences’, then ‘Screen Configuration’.
06 To be able to accurately identify someone’s
Right-click ‘DSI-1’ and select ‘orientation’, then face, we need to train our magic mirror. Using
‘right’. Now click the ‘tick’ to save. machine learning systems, we’ll take photos of the
mirror’s users and create mathematical models of
those faces so the mirror can recognise them in
future. To do this, we’ll download some tools. Run
Install OpenCV and more
05 Now we’re ready to get to work. To be
the following commands:

able to recognise faces, we need some artificial cd ~

intelligence. The amazing OpenCV software git clone https://github.com/mrpjevans/MMM-
is not only free of charge but also superb at Facial-Recognition-Tools.git
recognising objects, including individual human
faces. Understandably, it’s a monster of an (If you get an error, run sudo apt install git,
application, so we recommend a Raspberry Pi 4 then try again.)

Facial recognition with a magic mirror magpi.cc 51

 TUTORIAL

We now have a collection of tools to help train After the script has started up, have a look
Top Tip our mirror to the various faces it may encounter. into the camera at the same angle you took the
training photos. If all is well, you’ll see reports
PyImageSearch that your face has been identified! This means
the mathematical model has matched you with
Want to know Training time
more about image 07 Now it’s time to train our mirror. Run the
what it is currently seeing. If you don’t get
good results, try retraining or changing the
processing and
following commands: lighting. Repeat the process until you’re getting
recognition using
Python? There’s satisfactory results.
no better resource cd ~/MMM-Facial-Recognition-Tools
than Adrian python3 capture.py
Rosebrock’s
pyimagesearch.
Install the module
com.
Choose whether to capture live photos from your
webcam, or train from JPEG photos (you’ll need
09 Now we have our machine-learnt data,
to upload them in advance). You’ll be asked for we can go ahead and install the actual facial
your name. Keep it simple. Your author chose recognition module. To do this, we need to install
‘pj’, avoiding capitalisation, spaces, and special some code in the MagicMirror2 modules directory:
characters. You should now see your face on the
mirror’s display. Line up your face with how you cd ~/MagicMirror/modules
think you’ll be looking at the mirror (‘in situ’ is git clone https://github.com/mrpjevans/MMM-
best) and press ENTER to take a snapshot of your Facial-Recognition
face. Repeat this at least ten times before pressing
CTRL+C to stop. This installs all the files we need to add the module
Finally, run python3 train.py to convert the into the system. To complete the installation, we
images into mathematical data. When prompted need to add dependencies:
for an algorithm, select LBPHF.
cd MMM-Facial-Recognition
npm install

Testing time
08 To verify that the training worked, a testing
After a short time, all the files we need to run the
module will be installed.
script is provided. From the same directory, run Finally, make a copy of the training data from
these commands: Step 07 into the modules directory:

export FACE_ALGORITHM=1 cp ~/MMM-Facial-Recognition-Tools/training.

export FACE_USERS=pj xml ~/MagicMirror/modules/MMM-Facial-
python3 facerecognition.py Recognition/

(Replace ‘pj’ with the name you chose.)

Configure the module

10 Now we’re all ready to add the module to
our magic mirror. Just like last month’s tutorial,
we need to edit the /config/config.js file to add
our module in. This is in JSON (JavaScript object
notation) format, which is unforgiving of errors, so
add things in carefully and if in doubt, make a copy
of the file first so you can also ‘roll back’ should it
be needed.

nano ~/MagicMirror/config/config.js

Scroll down the file until you see the ‘modules’

section. There will be a series of entries grouped by

52 magpi.cc Facial recognition with a magic mirror

 TUTORIAL

list1.js
{ and }, all of them grouped in [ and ]. You need to > Language: JSON
add the list1.js listing printed here into the [ and ]
group. Each group of { and } needs to separated by 001.
a comma (except for the final one). Don’t save the 002. {
file just yet. 003. module: 'MMM-Facial-Recognition',
004. config: {
 fter a few seconds, the
A 005. // Array with usernames (copy and paste
006. from training script)
system should restart 007. users: ['pj']
008. }
and the ‘default’ modules 009. }

are shown
11 Customise the modules
Have a look at the config section you’ve just
list2.js
added. Where it says ‘users’, make sure the names
in the following square brackets match the ones > Language: JSON
you have trained for. Ours was ‘pj’ so it should
read [‘pj’]. If you trained multiple people, separate 001. var config = {
them with commas: [‘alice’, ‘bob’]. 002.
Now, for each module you want to customise per 003. ...
person, add an extra parameter of ‘classes’. This is 004.
a string with multiple entries separated by spaces. 005. modules: [
Add ‘default’ for always shown, ‘everyone’ for 006. {
every recognised face, and specific names if that 007. module: "clock",
module is only to shown for that person. See the 008. position: "top_left",
list2.js listing for an example. 009. classes: 'default'
010. },
011. {
012. module: "compliments",
Try it! 013. position: "lower_third",
12 Now it’s finally time to try out your mirror. 014. config: {
Restart MagicMirror2 by running this command: 015. compliments: {
016. anytime: [
pm2 restart MagicMirror 017. "Hey, PJ!"
018. ]
After a few seconds, the system should restart and 019. }
the ‘default’ modules are shown. Have a look into 020. },
the camera as you did for training and see if your 021. classes: 'pj'
modules appear. After a second or two, the mirror 022.
should refresh with your choice of display. 023. },
If you have any problems, use SSH to connect to 024. {
your mirror and run pm2 logs. This will show you 025. module: 'MMM-Facial-Recognition',
a live update of what’s going on. Typically, any 026. config: {
problems will be either not enough training or poor 027. // Array with usernames (copy
lighting. Just retrain by following the earlier steps and paste from training script)
and have another go. Soon you’ll have a cool mirror 028. users: ['pj']
that is unique to each of its visitors. 029. }
030. }
031. ]
032.
Thanks to Paul-Vincent Roll, author of the original 033. };
MMM-Facial-Recognition module.

Facial recognition with a magic mirror magpi.cc 53

 TUTORIAL

Part 01 Simon
Safe Crack game
Use continuously rotating control for Raspberry Pi
to create a rotary encoder game

R
How do they work?
otary encoders are the digital equivalent
of a potentiometer, but unlike most
02 See Figure 1 – this shows a disc of metal
potentiometers they can be continuously with castellations on the perimeter. There are
Mike rotated. The big problem is that there is a lot of two spring contacts on the outer castellations,
MAKER

Cook misinformation out on the internet about how such that as the disc rotates, one and then both
to read them properly on a Raspberry Pi. So we contacts will be touching the metal plate. There
Veteran magazine thought we would take a look at how to really do is a third, common contact, which is permanently
author from the old this correctly. Along the way, we can also have a attached to the metal plate. The contact that
days, writer of the
Body Build series, bit of fun with a fun safe-cracking simulator. breaks connection with the plate first depends on
plus co-author of the direction of rotation. There are four possible
Raspberry Pi for ways the two contacts can be connected or not
Dummies, Raspberry
connected, and these are shown in Figure 1 as
Pi Projects, and
What is a rotary encoder?
Raspberry Pi Projects
for Dummies. 01 There are two types of rotary encoder:
well. The sequence of connections is determined
by the direction of rotation.
magpi.cc/mikecook absolute and incremental. The absolute type
normally have lots of outputs, and are very
expensive. An incremental type has two outputs:
The KY-040 board
it is up to your computer to detect the direction of
rotation, and count the pulses it produces in order
03 The low-cost KY-040 board consists of
to find out what rotation has occurred. Each type a rotary encoder with a built-in push switch.
can be made with optical interrupters or switch There are also on-board pull-up resistors for each
contacts. The switch contacts are a lot cheaper, but contact. The schematic of this board is shown
come with problems of false contact events due to in Figure 2, so if you want to use a bare switch,
contact bounce. These can come with or without this is how you wire it to be compatible with this
detents, which is a posh way of saying clicks. tutorial. With this configuration, when you wire it

CLK contact End view of disc Figure 1

Spring Spring
DT contact
contacts contacts

CLK DT CLK DT
Common
contact
You’ll Need Metal
Anticlockwise Clockwise
> KY-040 rotary
CLK DT CLK DT
switch
magpi.cc/
rotaryswitch

> 3 mm MDF or

plywood for CLK DT CLK DT
the box
magpi.cc/
rotarywood

> A 40 mm knob CLK DT CLK DT

magpi.cc/ 
Figure 1 The inside
rotaryknob of a switched
rotary encoder

54 magpi.cc Simon Safe Crack game

 TUTORIAL

Top Tip
The pigpio
version
While pigpio is
pre-installed
This is the finished
in Raspbian,
rotary encoder in a box this version will
not work with
Raspberry Pi 4.
For that, you need
version 74. To find
out what version
The Simon Safe Crack you have, enter
game interacts with pigpiod -v -V
the rotary encoder in a Terminal.
See magpi.cc/
pigpio for how to
upgrade to the
latest version.

up to a power supply, the sequence of signals you

Figure 2 
Figure 2 Schematic of the KY-040 board
get is shown in Figure 3. Note that there are two KY-040KY-040
modulemodule
types of encoders with detents, shown in Figure 4 +3V3 +3V3
(overleaf). The detents are the resting place after Quadrature signals
a click; this board uses the first type, with the rest 10K 10K 10K 10K10K 10K
position giving the same output code.
SW 17GPIO 17
SW GPIO
A SW
DT
DT GPIO 27GPIO 27
CLK
A C
SW
C CLK22GPIO 22
CLK GPIO

Making the box

04 We made a simple 80×80 mm square box
from 3 mm-thick MDF; the sides were 17 mm B A B CA B C B SWB SW
GND GNDDT
B
high and separated by 14 mm hexagonal threaded
Rotary switch Push switch Front Front Back Back
spacers, 8 mm from each corner. A 7 mm hole was Rotary switch Push switch
drilled in the middle, and the encoder pushed
through the hole. Where the anti-rotation pip met
the board, we marked with pencil and drilled two
Quadrature signals A B
Figure 3C The four
 D valid Asignal B C
1 mm holes to form the slot. Then a 6 mm wide by Figure 3 states and how they change
1 mm deep slot was made with a file on one of the Lorem ipsum
dolor sit amet,
sides. The sides were sanded off at an angle of 45º
Left to right Right to left
and glued together to form a square. The spacer
CLK
holes were countersunk and the top was glued to DT CLK DT CLK

A 1 1 A 1 1
the sides – see Figure 5 (overleaf).
B 0 1 D 1 0

C 0 0 C 0 0

D 1 0 B 0 1

DT
Finishing off
05
A 1 1 A 1 1

The box was painted silver, as a contrast to B 0 1 C 0 0

the gold knob, with PlastiKote B30 silver paint. A C 0 0 D 1 0

length of six-way ribbon cable was soldered to the

KY-040 board and pushed through the slot. Finally, A B C D A B C Clockwise Anti-clockwise

Lorem ipsum
dolor sit amet,

Left to right Right to left

Simon Safe Crack game magpi.cc 55

DT CLK DT CLK
 DT

A B C D A B C
TUTORIAL

Detent position

Figure 4
CLK

CLK

DT

DT
A B C D A B C

A B C D A B C


Figure 4 The
detent resting
Detent position Detent position position on two
types of encoder

Software strategy
the other end was wired up to a 20-way header
CLK and wired up as shown in Figure 6 (overleaf).
socket
07 We need to have these edges trigger an Top Tip
You can wire up the board to any three GPIO lines, interrupt, but the normal Python mechanism
but you will have to change the pin assignment is way too slow to cope. Therefore, we have Wobbly
in the software to match. If your encoder has no to use something faster. To the rescue comes encoders
thread, or you have no matching nut, you can mount the pigpio library. This is written in C, and can
DTboard to the top of the box with two 10 mm
the detect a transition within 1 µs (a microsecond) Some of the low-
cost suppliers
male-female spacers, as shown in Figure 7. of it occurring, although the default 5 µs is fast
don’t always have
enough. It can still take up to 10 ms for that event the best-quality
A B C D A B C
to percolate up through the system so that Python switches; we got
knows about it; however, pigpio buffers these some poor ones.
Contact bounce
06 While in theory the signals from the rotary
events, so that although they might not arrive in
real time, they do eventually arrive. Therefore, we
In particular, if you
make a click and
get no response,
encoder should look like the waveforms drawn so do not miss any counts.
this is because
far, in practice it is not always the case. Consider
Detent position the detent has
the oscilloscope waveform shown in Figure 8. Here not returned the
we see the falling edge of both signals is clean, as contacts to the
Class driver
is the rising edge of the bottom trace. The rising
edge of the top trace, however, shows considerable
08 We have written a class driver that will
correct place. A
slight sideways
motion will often
contact bounce, with many false edges before the cause call back functions to be triggered from both
free the contacts,
switch settles down. Fortunately, there is a simple the edges of the rotary signals, as well as the push
and the click will
way to get round this, because in the normal course switch. The push switch is optional, and we do not then be registered.
of operations you will always get signals first from have to specify anything for this if we don’t want
one line and then the other. If you get two or more them: simply miss out the pin assignments and
edges from the same line consecutively, then callback functions when initialising an instance
simply ignore those edges. of the class. The code for the class driver is shown
in ky040.py (download it with the other code files
Figure 5 from magpi.cc/pibakery) and should be in the
same directory as the script that’s calling it.

Using the class driver

09 The input_test.py script is a small test
program for using the class driver. This sets up
an instance of the class that matches the wiring
pin assignments we wired earlier. Once going, the
callback functions will report any rotary and switch
push action. Note: the switch pushes also return

Figure 5 The MDF
the time of the switch push or release as well as the box construction

Simon Safe Crack game magpi.cc 57

 TUTORIAL

Raspberry Pi
DOWNLOAD
THE FULL CODE:
magpi.cc/pibakery
GPIO 22 (15)

GPIO 27 (13)
Figure 6
GPIO 17 (11)

Box
GND (9)

GPIO 4 (7)

KY-040 CLK
SCL (5)
DT
SW
+ SDA (3)
GND

3V3 (1)


Figure 6 Wiring
the KY-040 board
to Raspberry Pi’s
GPIO connector

Customising the game

pin. If you run this code directly after bootup, it can
fail to start pigpio correctly, and give you an error
11 As the game is written under the Pygame
message. If this happens, just run the program framework, closing the window will finish the
again and it’ll be fine for the rest of your session. game, as will pushing the switch in the rotary
encoder. In the init function, you can change
the number of times you have to fail to finish a
round with the maxFails variable. The maxLength
Simon Safe Crack
10 The simon_safe_crack.py script is the game
variable defines how long the sequence has to
get before you are considered to be cheating.
itself. Here you have a combination lock dial, and In the say function, you can change the voice:
the computer announces the combination using the commented-out one is for a female voice.
‘espeak’. If this is not installed, get it by entering Finally, you can change the maximum number
sudo apt install espeak in a Terminal window. You of clicks you are asked to move each time by the
then have to match the combination by turning the last number in the random number range in the
encoder the number of clicks and direction you were main function.
told to. For example: four left, ten right, one left. 
Figure 7 Mounting
Note that the combination always ends with one. If the board if you have
no thread or nut
you are successful at matching these instructions,

Figure 8 Possible
an extra turn is added. This continues until you fail Next month we will look at some more rotary
contact bounce on
three times, and that signals the end of a round. encoder fun, using two encoders at the same time. the signals

Figure 7 Figure 8

58 magpi.cc Simon Safe Crack game

 UniPiCase for Raspberry Pi 4
Perfect option for your DIY or high-volume commercial projects

Fits all kinds of HATs

Ideal PoE HAT case

Use with HAT or Pi alone

Simple and professional

Rapid, tool-free assembly

GPIO cable pass-through

Two wall mount options

Well ventilated

www.UniPiCase.com

Designed and manufactured in North America

 FEATURE

Track weather
& pollution
WITH RASPBERRY PI
Air quality, humidity, and UV monitoring, as well as daily
weather forecasting, all make for rewarding – and potentially
creative – Raspberry Pi projects. Rosie Hattersley finds out more

O
pen data is a marvel. It allows us to learn source, before ramping up the number of sensors
and share so much about the world around and reading your Raspberry Pi logs. In the case of
us. If you’re a weather obsessive or take a air quality and pollution, tracking such changes has
healthy interest in the state of the environment, never seemed so relevant.
being able to monitor changes – or simply predict Making use of weather-related findings can also
what weird weather to expect next – is a great way take you in different directions, from graphs, logs
to use your Raspberry Pi and coding skills. Over and user-generated maps to real-time tracking
the next few pages we’ll look at options if you’re ideas with trigger warnings. As well as presenting
keen to learn how to set up your own weather project ideas you can emulate, we look at some of
station. Essentially, start small and focus on one the most interesting Raspberry Pi-enabled weather
environmental aspect, using an existing data tracking ideas to have caught our eye.

60 magpi.cc Track weather & pollution with Raspberry Pi

 FEATURE

WIND VANES
Wind vanes show the direction the wind is
coming from, not where it’s going. A wind vane
works because wind exerts force on its vertical
blade, which rotates to find the position of
least wind resistance; this position is aligned
with the direction of the oncoming wind

ANEMOMETER
A typical anemometer has three
arms with scoops on the end that
catch the wind, causing it to spin

MICROPHONE
Noise pollution is an aspect many
folks overlook, although it’s a
popular subject in city areas. This
is monitored with a microphone

BME280
The Enviro board from Pimoroni features several
sensors for weather and pollution: a BME280 for
measuring temperature, pressure, humidity; LTR-559
light and proximity sensor; and a MEMs microphone.
The Enviro + Air Quality version also includes a
MICS6814 analogue gas sensor and a connector for
an add-on particulate matter sensor RAIN BUCKET
This rain gauge is basically a self-emptying
tipping bucket. Rain is collected and
channelled into the bucket

Track weather & pollution with Raspberry Pi magpi.cc 61

 FEATURE

Weather & pollution tutorials

Learn to track the elements with Raspberry Pi, a few sensors, and these tutorials

Sense HAT
rainbow predictor
There’s something really special about
seeing a rainbow. The Sense HAT’s LED
matrix helps improve your odds of seeing
one by alerting you when conditions are right.
That’s when there’s at least 80% humidity and
the temperature is about 20°C. The instructions at
magpi.cc/rainbows explain how to use a Trinket
emulator to make your own virtual rainbow by
assigning values to colours. Then you can use a
Raspberry Pi Sense HAT (magpi.cc/sense-hat) to
build the project for real.
You need to look up and select colour values
using the RGB chart at magpi.cc/trinketcolours.
When the Trinket’s colours begin to make a
rainbow, the weather conditions are also aligning
to make a rainbow sighting more likely. A great
way to add a reward for writing code.
magpi.cc/rainbows
Build your own weather station
The Raspberry Pi Foundation’s Weather Station project is a
classic, and pre-assembled kits were sent out to schools around
the UK.
To make one at home, you’ll need a Raspberry Pi with wireless LAN,
plus some or all of these to create a sophisticated weather station:
a BME280 combined pressure/humidity/temperature sensor, an
anemometer, wind vane and rain gauge, a digital thermal probe, a
breadboard, and some jumper wires.
You can pick and choose which types of weather and environmental
Plot temperature elements as colour values on a Sense
changes you wish to track, and it is best to start with one or two sensors HAT’s LED matrix. When it displays a rainbow, a real one
and move on up. may well appear in the sky

Data from the Raspberry Pi add-on sensors can be imported using

straightforward Python code listed on each project page. For example, if
you have a thermal probe, you can use it to compare the air temperature
to that of the ground. Depending on the season, this may give very
different readings.
magpi.cc/weatherstation

62 magpi.cc Track weather & pollution with Raspberry Pi

 FEATURE

Dress for the weather

ESSENTIAL KIT
Isn’t it annoying when the sun’s shining when you leave home
but by the time you reach your destination you’re facing a
downpour? If you’re heading off for a day out and need to check
the weather at your destination, with OpenWeatherMap you can find
out local weather conditions so you can dress appropriately. Sign up
for a free account at openweathermap.org/api. Instructions given at
magpi.cc/dresswisely show you how to use the Python module to import
OpenWeatherMap data. Using the code listed at magpi.cc/weathermap,
select your country or home town to get up-to-date weather information
for your area. Once you know the forecast, you can write what-to-wear
instructions that match the impending storm front or heatwave. SENSE HAT | £32.10
magpi.cc/dresswisely Featuring an accelerometer to measure speed,
a gyroscope to sense direction, temperature,
humidity and barometric pressure sensors, and a
magnetometer, a Sense HAT can tell you exactly
what’s going on! Its 8×8 RGB LED matrix display
provides a visual update.
magpi.cc/sense-hat

Weather logger ENVIRO | £27.60 / £45

If you prefer to log weather details based on your own Available in two versions, the Enviro board is aimed
at citizen scientists keen to monitor the world around
observations, the Weather Logger project (magpi.cc/weatherlog)
them. Temperature, pressure, noise, and light levels
can help. It makes use of information gleaned from your Sense
are all logged, while the ‘+ Air Quality’ model also
HAT, and you plot the graph based on what its sensors report. First, you tracks how clean the air is and encourages you to log
need to set the Sense HAT (or the online Trinket emulator) to check the polluting particulates in your neighbourhood.
temperature every five seconds. Once a set number of readings has been magpi.cc/enviroplus
gathered, you use the Pygal Python module to create a graph showing its
findings. Since you can set the parameters and specify temperatures, this
project also works as a simulator for different weather conditions.
magpi.cc/weatherlog

Graphing the weather

Get the impression rainfall is increasing and winds getting
stronger? Using a weather tracker, you can record what happens each
day and create a weather graph to back up your hunch. The ‘Graphing WEATHER STATION KIT | £145
the weather’ project (magpi.cc/weathergraph) uses a RESTful API to pull A classic wind vane weather station, The Pi Hut’s
in JSON data then uses the matplotlib Python library to create simple kit logs wind speed/direction and rainfall, and is
line graphs. Data is supplied from the Raspberry Pi Weather Database, designed to be used in conjunction with electronic
information for which comes from the 1000 schools that were sent weather kits and single-board computers. Its meteorological
focus is useful for logging environmental changes
stations by the Raspberry Pi Foundation back in 2016. You can discover
and for geologists, engineers, and urban planners.
one that’s local to you by using the ‘Fetching the weather’ resource
magpi.cc/windvane
(magpi.cc/fetchweather), then find out how to manipulate the data.
magpi.cc/weathergraph

Track weather & pollution with Raspberry Pi magpi.cc 63

 FEATURE

Learn to track weather & pollution

These inspirational projects make great use of easily accessible environmental information

Tide Clock Weather Project

Surely one of the most stylish presentations of weather
effects, the Tide Clock Weather Project uses different
coloured NeoPixel LEDs to display weather conditions and
temperature based on details imported from the Dark Sky API.
Weather symbols were specially laser cut and rotate using a gear
mechanism. The clever clock also pulls in tidal information from
the US NOAA and indicates whether the tide is high or low (and
consequently, for its maker, when it’s time to surf or kayak). A Speaker
pHAT attached to Raspberry Pi Zero chimes at high and low tides.
magpi.cc/tideclock

Nemo-Pi
It’s not just above ground that
environmental sensors come in useful:
coral reefs are being decimated by
rising temperatures and human activity
including damage from anchors. The Save Nemo
Foundation in Thailand and Indonesia uses a
Raspberry Pi-powered underground weather
station, Nemo-Pi, to monitor temperature, pH,
oxygen, and nitrogen levels. The solar-powered
monitors attached to buoys report back to a
central monitoring station. When the seas offer
poor visibility, dive ships know it’s not worth
visiting, while pollution incidents can quickly be
flagged and responded to, helping to preserve the
coral reefs.
magpi.cc/nemopi

64 magpi.cc Track weather & pollution with Raspberry Pi

 FEATURE

Smart Window Fan HELP & ADVICE

On a sticky summer’s night, your repose is not exactly going
to be restful if you have to keep getting up and switching the
fan off and on again. Ishmael Vargas’s alternative is genius: a
smart window fan that uses local weather information to check whether
the outside air is any cooler than inside and, only if it is, wafts external
air into his muggy apartment. A Raspberry Pi Zero monitors conditions
indoors, compares the temperature with that outside, and switches on a
smart fan.
magpi.cc/windowfan
WEATHER STATION FORUM
When building almost any type of weather tracking
system, get setup and troubleshooting help from the

Cloudy-A friendly folks on the Raspberry Pi Weather Station

Forum. Log issues here if you discover a site or
service has a glitch. Details of successful projects and
Much like the fantastic Weatherman project we featured in clever hacks are also encouraged.
issue 90, the weather forecast lamp pulls weather in data using magpi.cc/weatherforum
the Weather Underground API and presents it in a visual form.
Cloudy-A is an internet-connected lamp that changes colour depending
on the weather. The fact it also resembles a cloud says a lot about
what the prevalent weather conditions are likely to be! The project has
more than a nod to Blue Peter about it: the cloud’s core is a five-litre
rectangular plastic drinks bottle with two LED strips taped inside it, while
the cloud is made from cotton wool.
magpi.cc/cloudlamp

MET OFFICE
Schools and clubs can give the Met Office a run for its
money using its meteorological data to create your
own weather station. Rainfall, wind, and temperature
can all be tracked using the easy-to-follow
instructions on its site. No Raspberry Pi or coding is
needed for these quick-to-set-up projects.
magpi.cc/metoffice

PM2.5 AirBox Weather & Pollution Project

If you’ve read about the Raspberry Shake seismographic sensor
(magpi.cc/shakewlan), you’ll appreciate how citizen science TRACK AIR QUALITY WORLDWIDE
can be used to gather such data and create a useful map of Find out how much UV, pollen, and other pollutants
earthquake tremors. Taiwan-based Raspberry Pi fans used a similar idea, are currently affecting almost anywhere in the
making use of their country’s PM2.5 Open Data Portal location-aware world right now. The colour-coded Air Quality Index
sensing system (aka LASS) to accrue information on localised air quality. can be viewed by pollution type and from country
New users are given instructions and help with setting up their PiM25 down to neighbourhood level. Click the Here tab to
go straight to your nearest tracker. A shoo-in for a
AirBox sensor, after which they can upload GPS and air quality data to
Raspberry Pi project?
the portal, from which the weather and pollution map is generated. See
HackSpace issue 21 for how to make your own: magpi.cc/airmonitor.
aqicn.org/map/world
magpi.cc/airbox

Track weather & pollution with Raspberry Pi magpi.cc 65

 TUTORIAL

Build an air-
quality monitor
with Enviro
Monitor the environment by setting up an Enviro + Air Quality board,
mounting it outdoors, and accessing the logged data on the web

D
ue to growing concerns about poor air
quality and its effects on our health,
Phil King many people are keen to monitor their
MAKER

own environment to check for spikes in often

Phil is Raspberry invisible pollutants. While you could create a
Pi Press’s books DIY setup by connecting various discrete sensors
editor, as well as
being a sub-editor to Raspberry Pi, Pimoroni’s Enviro + Air Quality
and contributor for board makes it a lot simpler: just mount it on
The MagPi. the GPIO header, install the software, and start
magpi.cc monitoring. To check for microscopic particles in
the air, such as from exhaust fumes, you can also
plug in an optional particulate matter sensor.
The web dashboard enables you to view the logged
In this guide, we show you hot to set up your data over different time periods; this is the day view
Raspberry Pi Zero and Enviro + Air Quality board,
Attach the PM sensor
mount it in a weatherproof enclosure outdoors,
and use Chris Palmer’s EnviroPlusWeb software
02 If you have the PMS5003 particulate matter

Top Tip to log the data and access it a web dashboard

remotely from another computer.
sensor, connect the supplied cable to it – it’ll
only fit one way round, so don’t force it. Plug the
Note: This guide is based on Pimoroni’s online other end of the cable into the connector on the
Sticky strips tutorial for using Enviro with the Luftdaten underside of Enviro board (below the PM label on
citizen science project: magpi.cc/luftdaten. the top side), again making sure that the cable is
We used double-
sided adhesive going in the right way round.
Command Strips
(medium size)
to attach the Mount the Enviro
PM sensor and 01 Boot up Raspberry Pi
Raspberry Pi to
If you’re using a Raspberry Pi Zero W,
then you’ll need to have a 40-pin male GPIO
03 To make sure that you have sufficient
the inside of the
enclosure, but if header soldered onto it. Alternatively, you can power, we advise using the long USB-A to micro-
you can get the use a Raspberry Pi Zero WH, which already has a USB cable in the final build before putting your
hook-and-loop pre‑soldered header. setup in the outdoor enclosure.
ones, they make it Attach the Enviro board’s female header to You’ll need a microSD card with Raspbian Buster
easier to remove Raspberry Pi’s GPIO pins. To make sure the board installed – while it’s possible to use the Lite
the electronics
won’t wobble around, you can use a couple of version, we’ll assume you have the full version
later if you need
to adjust anything. metal stand-offs the secure the edge furthest ‘with desktop and recommended software’, as it
from the GPIO header to Raspberry Pi. has the dependencies we need for the software.

66 magpi.cc Build an air-quality monitor with Enviro

 TUTORIAL

Mounted on a Raspberry Pi Zero,

the Enviro board has a BME280
sensor to measure temperature,
humidity, and pressure
Photos courtesy of Pimoroni

Warning!
The optional particulate matter sensor Linked to an ADC, the MiCS6814 Outside mounting
tests the air continually to detect analogue gas sensor detects
microscopic particles such as pollen, three gas groups: oxidising, When placing your air-
quality monitor outdoors,
mould spores, and various pollutants reducing, and NH3 (ammonia) take care if using a
ladder. Also, make sure
you have the property
owner’s permission.
magpi.cc/ladders

If it’s not a fresh install, do a sudo apt update to serial console, and enables the mini UART interface
make sure it’s up to date. that Raspberry Pi uses to talk to the PMS5003
Connect your Raspberry Pi to your wireless particulate sensor.
You’ll Need
network, as usual, and enable SSH in the Interfaces To check that everything is working correctly,
tab of the Raspberry Configuration tool, so you can run the all-in-one example: > Raspberry Pi Zero
access it remotely later. WH (or W with GPIO
cd examples pins soldered)
magpi.cc/pizerow
E nviroPlusWeb logs data python all-in-one.py
> Enviro + Air Quality
from the Enviro board’s Tap your finger on the board’s light sensor to magpi.cc/enviroplus
cycle through data from different sensors being > PMS5003 particulate
sensors and generates a displayed on its LCD. When you’re happy it’s all matter sensor
working, press CTRL+C to stop the program. magpi.cc/pmsensor
Flask web server > Metal stand-offs
(optional)
Install Enviro library
04 Install EnviroPlusWeb
> Long USB-A to
To use the Enviro board, you’ll need to
install its Python library. Open a Terminal window
05 You can now install the EnviroPlusWeb
micro-USB cable
(2m to 5m)
and enter the following commands: software, which logs data from the Enviro board’s magpi.cc/
microusb5m
sensors and generates a Flask web server so you
git clone https://github.com/pimoroni/ can view a dashboard remotely. From a Terminal > 2 × Square 112.5°
enviroplus-python window, enter: downpipe bends
magpi.cc/pipebend
cd enviroplus-python
sudo ./install.sh cd > 2 × Command Strips
sudo pip install smbus2 git clone https://github.com/nophead/ (medium)
magpi.cc/cstrips
EnviroPlusWeb.git
Once that’s all done, enter sudo reboot to restart > Duct tape
your Raspberry Pi to apply the changes. The install To test it out, change to its directory and run the > Cable ties (long)
script enables I2C, SPI, and serial, disables the app.py program:

Build an air-quality monitor with Enviro magpi.cc 67

 TUTORIAL

View web dashboard

06 To view the dashboard created after
running app.py, you simply need to visit your
Raspberry’s Pi’s IP address (e.g. 192.168.1.76) in
a web browser on another computer connected to
the same network.
To discover the correct IP address, enter
hostname -I in a Terminal window on your
Raspberry Pi, or visit your wireless router’s
homepage (e.g. 192.168.1.254) and view the
devices list.
Note: You may also want to reserve a static IP
for your Raspberry Pi, so that the web dashboard
address doesn’t change if it’s rebooted. This is
A Flask web server
showing real-time and
cd EnviroPlusWeb most easily done in the settings of your router if it
logged data can be sudo python3 app.py supports this. If not, edit the /etc/dhcpcd.conf file
viewed remotely from
another computer – see magpi.cc/staticiphelp for details.
Note that if you don’t have a PM sensor connected,
you’ll get an error at this point. In this case,
you’ll need to use your preferred editor (e.g.
T o view the dashboard
Top Tip Thonny, Nano) to remove – or comment out – the
relevant lines (29, 49, 125 to 141, and 151 to 156)
created, you simply need
Weatherproofing
from app.py. You may also want to remove the to visit your Raspberry’s
relevant sections from the readings.html and
Duct tape should index.html files in the templates directory. Pi’s IP address
prove sufficient to If everything is working, you’ll see the following
Fine-tuning the graph
stop water getting
into the enclosure.
in the Terminal when you run app.py:
07 The web dashboard that’s generated shows
To make it extra
* Serving Flask app "app" (lazy loading) current data for the sensors on the left and a
watertight,
* Environment: production colour-coded graph of the readings. By default,
however, you may
want to seal the WARNING: Do not use the development this is for the past five minutes, but you can use
join with silicone server in a production environment. the drop-down on the left to change it to day,
sealant first, before Use a production WSGI server instead. week, month, or year.
applying the tape. * Debug mode: off If you find that some of the sensor readings
are going off the top of the graph (or are always
very low), you can change the min/max ranges for
Figure 1 each one in the index.html file (lines 78 to 90)
in the templates directory. For example, for the
reducing gases reading, we changed it from a max
of 1000 to 10000:

{name: "red", colour: "darkorange", min:

0, max: 10000}

Automatically run at bootup

08 Before you put your air-quality monitor
in the outdoor enclosure, you’ll want to get it to
run the app.py script automatically whenever
Raspberry Pi boots up. For this, we’ll create a
Figure 1 Stick a
crontab job. In a Terminal, enter:
Command Strip to stick
the PM sensor to the
inside of the end of one
of the pipe bends crontab -e

68 magpi.cc Build an air-quality monitor with Enviro

 TUTORIAL

Figure 2


Figure 2 Carefully
position your
Raspberry Pi Zero and
Enviro at an angle so
Photos courtesy of Pimoroni

there’s enough room

for the power cable
when the pipe bends
are slotted together

Top Tip
Wireless signal
At the bottom, enter a new line: Attach another Command Strip to the bottom
With the windows
of your Raspberry Pi Zero, then peel the backing shut, we found
@reboot sudo python3 /home/pi/EnviroPlusWeb/ from the other side. Now you need to stick your that the strength
app.py & Raspberry Pi Zero at the bottom of the pipe, below of our air-quality
the PM sensor, at an angle (Figure 2) so that you monitor’s wireless
Press CTRL+X and then Y to save. Now, when you can attach the power cable with enough clearance connection to
our router (on the
reboot Raspberry Pi, it should run automatically to attach the female end of the other pipe bend.
opposite side of
– check that it works and you can access the Try fitting the two pipe bends together so the house) was
web dashboard. that the female end slides all the way in, but a little weak and
Note: When the program is run automatically, don’t force them if they won’t go. Now boot unreliable, with
the resulting data folder (containing JSON files up Raspberry Pi again to check that the script is around 30/70 link
of the logged data) is located in the /home/pi running and everything is working. If so, stick quality – you can
test this by SSHing
directory rather than the EnviroPlusWeb one. Chris some duct tape over the join between the two pipe
in and entering
says that a day’s worth of data is about 62kB, so bends to stop water getting in.
the iwconfig
about 22MB per year, so after about 136 years it will command. Placing
fill the microSD card! a plug-in wireless
booster (a TP‑LINK
Mount the enclosure outdoors RE200) in our
10 The final step is to put your air-quality conservatory
solved this.
Build the enclosure
09 Now all the software is set up and tested,
monitor outside. We used long cable ties (you
can link two together for extra length if needed)
it’s time to build the outdoor enclosure. First, shut to secure our enclosure to the underside of some
down your Raspberry Pi and unplug it from the conservatory guttering, but you may want to attach
power supply. yours to a drainpipe. Either way, cross the cable
Stick a Command Strip to the bottom of the PM ties diagonally to keep it firmly in place.
sensor, then peel off the backing on the other We ran our long USB power cable through a small
side. Take the smaller, male end of one of your window to reach our indoor power socket, but if
downpipe bends and stick the PM sensor inside you have a weatherproof outdoor socket, that’s
the top of it (Figure 1). even better.

Build an air-quality monitor with Enviro magpi.cc 69

 PLAY
& CODE
GAMES!
RETRO GAMING WITH

RASPBERRY PI
Retro Gaming with Raspberry Pi shows you
how to set up a Raspberry Pi to play classic games.
Build your own portable console, full-size arcade
cabinet, and pinball machine with our step-by-step
guides. And learn how to program your own games,
using Python and Pygame Zero.

Set up your Raspberry

Pi for retro gaming
Emulate classic
computers and consoles
Learn to program
retro-style games
Build a portable
console, arcade cabinet,
and pinball machine

BUY ONLINE: magpi.cc/retrogaming

 REVIEW

Adafruit 1.3″
Color TFT Bonnet
Adafruit magpi.cc/adafruit13tft £17 / $18
SPECS

DISPLAY:
IPS TFT, A compact TFT display with two buttons and a joystick.
240×240
colour pixels, Perfect for gaming? Not so fast! By Lucy Hattersley
controlled
over SPI

A
t first glance, the Adafruit 1.3″ Color TFT “I wouldn’t use it for gaming, as it’s very small and
CONTROLS:
5-way joystick Bonnet for Raspberry Pi reminded us of a not that comfortable.”
and two classic tiny games console. A tiny 33 mm
push‑buttons (1.3-inch) 240×240 display is framed by a five-way What’s it for?
joystick on the left and two buttons on the right. So, if a device so reminiscent of a classic console
CONNECTION:
Qwiic/STEMMA The display is an IPS TFT type controlled over SPI. isn’t for gaming, what is it for? The Bonnet
QT connector Our immediate thought went to the old Game shares a heritage with Adafruit’s Mini PiTFT
for I2C sensors Boy Micro, and we considered putting it inside an (magpi.cc/minipitft13). That device features the
old Nintendo game controller case and turning it same square 33 mm display, but has just the two
CHIP:
ST7789 chipset into an ultra-micro games console. buttons. This Adafruit 1.3″ Color TFT Bonnet comes
This, it turns out, is a bad idea. As Limor Fried with the five-way joystick to enable more complex
DIMENSIONS says in the launch video (magpi.cc/bonnetvideo): interface interactions (the fifth direction is a push
& WEIGHT: inwards, incidentally).
65.5 × 30.6 ×
15.2 mm (2.6 ×
1.2 × 0.6″);
13.0 g (0.5 oz)  o, if a device so
S
reminiscent of a classic
console isn’t for gaming,
what is it for?
Like the Mini PiTFT, the Adafruit 1.3″ Color
TFT Bonnet also features a Qwiic/STEMMA QT
connector for I2C sensors. And this is where
things become clearer. You can plug and
play Adafruit’s range of STEMMA QT devices
(magpi.cc/adafruitstemma), which includes all
manner of sensors: magnetometers, temperature,
The tiny 33 mm display running in pressure, proximity, and so on.
kernel mode and displaying a console.
It is in this area where the Adafruit 1.3″ Color TFT
You can read the text if you squint
Bonnet comes alive. What we have here isn’t the

72 magpi.cc Adafruit 1.3” Color TFT Bonnet

 REVIEW

Underneath the Bonnet is a STEMMA QT connector,

enabling you to hook up a range of I2C sensors

heart of a portable games console, but an interface

for a range of sensor projects.
In that spirit, it is something of a shame that The screen is framed by a five-way joystick
and two push-buttons, enabling you to create
the Bonnet covers the entire 40-pin GPIO header, complex interfaces for your projects
unlike the Mini PiTFT which leaves 16 pins free.
But the STEMMA QT connector provides your
I/O needs. The kernel installation script also enables you
to run Raspberry Pi in a console mode. Text mode
Kernel or Python is better, if you have very good eyesight, but it’s
Setup of the Adafruit 1.3″ Color TFT Bonnet was still lacking an effective use case. According to
straightforward, although the linked instructions
(magpi.cc/tftguide) are for the two-button
Adafruit, the Bonnet runs at 15 fps in kernel mode,
so it is better suited to simple animations and
Verdict
Adafruit Mini PiTFT. video (neither of which is fun to watch on such a We found this
There are two approaches: use a script to install a small display). a bit of a head-
kernel module, or use Python and the Pillow library This leaves the second, more practical, option. scratcher, and
we’d be interested
(magpi.cc/pillow) to draw images on the display. Which is to follow the Python setup guide. This
to hear from
Crucially, you can’t use both techniques at once. approach is (according to Adafruit) more stable makers who find
This is a shame as the kernel module is faster and, and allows you to write Python code to control it fits their use
arguably, more fun. But once it’s installed, you the display. case. Unless you
can’t move on to using Python. You need to install the Adafruit_Blinka library know exactly what
The kernel method is also more accessible that provides CircuitPython support in Python. you’re going to
make with it, we
method for beginners. Run a script and you can Once up and running, you can follow the tutorials
suggest going for
mirror the Raspbian with Desktop interface on the to create your own display interfaces, and there are the simpler two-
tiny 1.3-inch display. examples on the site. From here, you will be able button Adafruit
It’s fun but wholly impractical. Not quite to create interfaces that display information, and Mini PiTFT.

7
ready to give up our dream of a teeny console, we interact with your range of I2C sensors.
attempted to install PICO-8 in this mode and while The screen is sharp, and lovely to look at, but

/10
it did run, the experience was (as Limor claimed) it’s so small that it strikes us as a bit fiddly for
too small. anything complicated.

Adafruit 1.3” Color TFT Bonnet magpi.cc 73

 REVIEW

Maker pHAT
Cytron magpi.cc/makerphat £8 / $10
SPECS

ON-BOARD
COMPONENTS: A board to help beginners get started
Active buzzer,
3 × push-buttons, with physical computing. By Phil King
8 × blue LEDs

W
BREAKOUT: hen trying to learn how to use and
Fully labelled 24-
pin header, plus
program electronics with Raspberry
stacking header Pi, learners – whether in a classroom
setting or at home – face some typical problems.
REMOTE First, you need access to a keyboard and monitor.
CONNECTION: Second, there’s the sometimes tricky business
USB to serial
module of attempting to create electronic circuits from
separate components without getting it wrong
and the possibility of ‘magic smoke’. Then, if your
The board is the perfect size for mounting on a Raspberry Pi
project doesn’t work, it’s hard to tell whether Zero, although stand-offs aren’t included
it’s because your wiring or code isn’t right, or
maybe both. This isn’t helped by the difficulty of certain GPIO pins. Along with three small push-
identifying the correct GPIO pins on Raspberry Pi, buttons, there’s an active buzzer and eight tiny
as they’re unlabelled. LEDs – we were slightly disappointed that they’re
Cytron’s Maker pHAT attempts to solve these all blue and not a range of colours. A nice touch is
issues and make it a lot simpler to get started with the inclusion of a fully labelled, 24-pin breakout
physical computing on Raspberry Pi. header for connecting external components when
you’re done playing with the on-board ones.
Purple PCB While you can simply mount the board on your
The cool-looking purple PCB has some common Raspberry Pi’s GPIO header – with or without
components already on board and connected to the supplied 40-pin stacking header – and start
coding, the pièce de résistance is the inclusion of a
USB to serial module. This enables you to connect
the board to a laptop and control (and power) it and

Verdict Raspberry Pi remotely from there, eliminating the

need for a separate monitor and keyboard.
An inexpensive A comprehensive online manual
and well-designed (magpi.cc/makerphatinfo) explains how to install
board for physical a special driver and get the serial connection
computing working using PuTTY on Windows, though not on
newbies. We a Mac. For the latter, use Terminal and enter ls
particularly like the
/dev/cu.usbserial-* to find the device number,
option to control
it from a USB- then screen /dev/cu.usbserial-XXXXXXXX 115200
connected laptop. –L to log in (after pressing ENTER repeatedly). The

9
manual includes a Python demo program, which
makes use of GPIO Zero, to get you started – it

/10
even enables you to safely shut down Raspberry Pi
The supplied stacking header provides full GPIO breakout and can
be used to elevate the board on a full-size Raspberry Pi by pressing two of the buttons together.

74 magpi.cc Maker pHAT

THE BEST-SELLING MAG FOR PC HARDWARE, OVERCLOCKING, GAMING & MODDING

PC HARDWARE
ENTHUSIASTS

ISSUE 200 OUT NOW

VISIT CUSTOMPC.CO.UK TO LEARN MORE
 REVIEW

SaniaBOX
Saniabox saniabox.com £144 / $169
SPECS

KIT CONTENTS:
Raspberry Pi 4, A starter kit for teaching coding
preloaded
16GB microSD and electronics. Rob Zwetsloot
card, PSU and
HDMI cables, checks out 13-year-old Sania’s
keyboard,
mouse, Kickstarter success story
SaniaBOX
add-on board,

D
breadboard, espite how easy it is to put together a very
LEDs, diodes
specific physical computing teaching kit
SENSORS: with a Raspberry Pi, there are actually
Thermal sensor, not that many full kits that do so that include a
touch sensor, mouse, keyboard, and Raspberry Pi.
light sensor,
SaniaBOX is slightly different, though. Akin to
optional gas
sensor a mix of the official Desktop Kit and specialised
beginner’s kits, the package comes with the
RELEASE requisite Raspberry Pi, keyboard, mouse, and
DATE: microSD card along with the special SaniaBOX
Sometime
around or after
add‑on board and a series of components.
April 2020 This Kickstarter project brought to life was the
idea of a Sania Jain, a 13-year-old who wanted to
introduce coding to younger kids where possible.
To that end, the all-important add-on board part
of the kit includes a series of sensors, LEDs, as well
as that big three-digit, seven-segment display.

Quick build
Unlike a pi-top or a Piper, you’re not building a
laptop or laptop-esque system – instead you’re
setting up a Raspberry Pi as normal and popping
the HAT-like SaniaBOX add-on on top. Faster than
even loading up your favourite streaming service (we’ll catch up with you later, Picard) and it does
allow you get stuck in straight away with some
coding lessons.
On the microSD card are a series of coding
challenges, and you can find tutorials on the
SaniaBOX website if you want to check out how the
whole system works before diving in. The code for
controlling the add-on bard can be simple (like
with the LEDs) or a little more complicated (as with
a 120-line script for working the seven-segment
displays). The kit comes with some other LEDs,
some diodes, and a breadboard so that you can do
proper circuit prototyping once you graduate from
Sania is the girl
behind the SaniaBOX some of the SaniaBOX add-on’s functions.

76 magpi.cc SaniaBOX
 REVIEW

The SaniaBOX add-on

fits on Raspberry Pi
much like a HAT

Simple and fun

The special add-on board works just fine, and has
plenty of little sensors and ideas to keep younger Verdict
folks – and even older folks new to making –
A great and
entertained. With all the various functions, you can
simple way to
easily make something like a barometer – a great get younger
practical use of coding and electronics. makers (and even
The price is possibly being reduced by the older newbies)
time you read this as well, so if the cost of it is into computing
putting you off a bit, it may well have about £15 / and coding.

8
$20 knocked off. Considering that the Raspberry
Pi Desktop kit with a very similar selection of

/10
components will set you back £100 / $120, we think
SaniaBOX comes in a great-looking box with all the components
you need to start using and learning with Raspberry Pi it’s a pretty good deal.

SaniaBOX magpi.cc 77
 REVIEW

10 Best:
Pi Zero Talking Radio

Pathé news, now!

This radio reads out your notifications
from a variety of services. It doesn’t

Audio
have an old-fashioned news bulletin
voice, but it’s the spirit that counts.

magpi.cc/talkingradio

projects P.S.S.P. – Pi Single Song Player

Want to hear something with a
One song only
Raspberry Pi? Take note of these Want to listen to one song, and
amazing audio projects one song only? Close a contact
on this Raspberry Pi project for
just that. Simple.

R
aspberry Pi is not-so-secretly a multimedia
magpi.cc/pssp
powerhouse. With software like Kodi for TV
streaming, RetroPie for a bit of gaming, and
even jukebox software for your parties, it can handle
just about anything. Here are some of our favourite
ways that its audio skills have been put to use.
Google Pi Intercom

Old-school personal assistant

Martin Mander made this with the AIY Projects kit that came with The MagPi
#57. We love the meta idea of how this has been repurposed.

magpi.cc/intercom

Wavepad

Wave away music

We like yelling at our digital home assistant thing to skip the
track it’s currently playing. It feels very Star Trek. Sometimes
it’s more dramatic to wave the music away – just like with
the Wavepad.

magpi.cc/wavepad

78 magpi.cc 10 Best audio projects

 REVIEW

Raspberry Pi music fingers

Finger drumming goodness

Play your own theme tune As well as being a lot of fun, this is a
neat little conductivity experiment
so you know how capacitive touch
Dramatic music player works. With a little beat added to it.

Feel like a sitcom character and have magpi.cc/musicfingers

some slapping bass tunes play as
you walk through the door. What’s
the deal with theme tunes, anyway?

magpi.cc/themetune

Ultrasonic theremin

Outer space vibes

This official Raspberry Pi project uses an ultrasonic distance
sensor – something you mostly find on robots – to create a
theremin sound as you move your hand through it.

magpi.cc/theremin

Audio Radar
Flirt Pi
Accessible sodar
Retro internet radio
Using sound to detect distance is pretty standard tech, but it
This is a 1970 Flirt radio that upcycling maestro Martin Mander has turned always helps to make it easier. This sodar project helps you
into a Raspberry Pi-powered internet radio, without sacrificing much of its do that.
wonderful aesthetics.
magpi.cc/audioradar
magpi.cc/flirtpi

Piano Stairs

Tom Hanks inspired

Using a light tripwire to
sense where you are,
(carefully) dancing up and
down these stairs should
help with your scales
and arpeggios.

magpi.cc/pianostairs

10 Best audio projects magpi.cc 79

 RESOURCES

Learn retro gaming

with Raspberry Pi
Rediscover classic gaming and code your own 8-bit
games with Raspberry Pi. By Lucy Hattersley

Code the Classics

Raspberry Pi If you’re looking for the story
CREATOR

Press behind some of the biggest

games around, along with the
Price: details on how to program your
£12 / $15
own versions, look no further.
magpi.cc/
This gorgeous 224-page
codetheclassics
hardback book tells the stories
of five seminal video games
from the 1970s and 1980s. It
starts in the style of Pong, then
moves on to games similar
to Bubble Bobble, Frogger,
Centipede, and ends with a
homage to Sensible Soccer. Pygame Zero, with examples If you haven’t got a copy yet,
All of the games are codeds by Raspberry Pi founder then you owe it to yourself to
programmed using Python and Eben Upton. get one.

Retro game coding

Make sure you bookmark these websites
PYGAME a great overview of the basic concepts, up
Most games you create on Raspberry Pi will to sprites and collision.
involve Pygame. So make sure you bookmark magpi.cc/pygameprimer
the Pygame website. Here you’ll find
installation instructions and documentation. PYGAME WIKI
pygame.org There are far too many other resources for
us to mention, but a great list is held on the
REAL PYTHON Pygame wiki. There are tutorials here for
For a primer on Pygame, you should make every aspect of Pygame.
sure to bookmark Real Python’s website. It’s magpi.cc/pygamewiki

80 magpi.cc Learn retro gaming with Raspberry Pi

 RESOURCES

Retro Gaming
with Raspberry Pi

Play the
game
If you want to just
play games, take a
look at these sites

Raspberry Pi While Code The Classics tells the consoles – and how to build RETROPIE
CREATOR

Press story of retro games, and how a portable games machine, RetroPie is the easiest way to
to create your own versions, arcade cabinet, and even a turn a Raspberry Pi into a classic
Price: Retro Gaming with Raspberry pinball machine. You’ll also games console. Once you set
£10 / $13 Pi is all about building discover how to upgrade classic this up, you’ll be able to play all
magpi.cc/retrogaming retro games consoles and computers, like a ZX Spectrum, those classic games.
arcade machines. with Raspberry Pi to bring the retropie.org.uk
In it you’ll discover how to best of the new to the best of
emulate classic computers and the old. PICO-8
PICO-8 turns Raspberry Pi into
a fantasy console that’s like an
8-bit gaming machine. You can

Make Games with Python download hundreds of games

made by the community, and
make your own games using
Sean M. Tracey For a long time this Essentials the Lua language.
CREATOR

guide was the final word on magpi.cc/pico8

Price: making Raspberry Pi with
£3 / $3 Pygame and Python games. ROMS
magpi.cc/ Few books dive into the detail When making your own retro
makegamespython of Pygame as much as this. Sean gaming console, you’ll need
M. Tracey takes you through the to get ROMs (files) of classic
process of creating shapes and games to play. Don’t just go
paths, movement, animation, downloading ROMs off the
and adding sound and music. internet, as you’re likely to end
It’s a great book that culminates up doing so illegally. Instead,
in building a shoot-’em-up take a look at our page of
complete with physics and approved classic ROMs.
forces. It’s a bargain as well, magpi.cc/legalroms
currently on sale at just £2.50.

Learn retro gaming with Raspberry Pi magpi.cc 81

 INTERVIEW

Dr Wednaud Educators can

contact Dr Ronelus on

Ronelus
[email protected]
for ‘Socratic Discussion
and other dialogues’

An educational researcher specialising in STEM, Raspberry Pi, and AI

> Day job STEM Education Research Scientist > Community role Educator
> Website magpi.cc/alchemistclub

H
earing how some people Wednaud told us. “When the What is Alchemist Club Studios?
refer to Raspberry Pi Raspberry Pi came out in 2012, I The Alchemist Club School &
can be very humbling. knew that education would never Studios is an educational
However, when a STEM education be the same again. I was totally platform that is designed to
researcher for New York City of blown away by this small credit- immerse learners in developing
over 20 years like Dr Wednaud card-size computer.” deep understanding of STEM
Ronelus tells you that the release Shortly after it came out, he concepts, ideas, and fundamental
of Raspberry Pi meant nothing got his own Raspberry Pi and principles by using a ‘physical
would be the same again, it’s started meeting with New York approach’ to computing in
quite high praise. City’s top technologists to learn education. One of the main goals
“I have been testing cutting- more about it. He also attended of the Alchemist Club School &
edge ideas of how to bring a early Raspberry Jams and Studios is addressing the crisis of
paradigm shift in STEM teaching events. One of the things to minorities under-represented
Students have access
and learning using the latest come out of this was Alchemist in STEM.
to some of the rare
Google AIY kits emerging technologies,” Club Studios. We have developed an
innovative learning platform to
help students develop a working
understanding of bleeding-edge
learning technologies… our first
initiative focuses on using the
Google Artificial Intelligence
Yourself (AIY) Project Kits
(Voice and Vision) to help
learners develop a working
understanding of machine
learning, artificial intelligence,
deep learning, and the Internet
of Things by constructing
learning artefacts that are used
to assess STEM content mastery,
critical thinking skills, and
academic self-efficacy.
One of the main goals of the
Alchemist Club School & Studios

82 magpi.cc Dr Wednaud Ronelus

 INTERVIEW

Switch
of career
Students get to learn about a lot of AI and other
computing subjects at Alchemist Club Studios “My educational
background is in the
is to take advantage of the Google learning environments since the minorities under- physical sciences. You
might find this hard
Classroom educational learning 2013. I have collected tons of represented crisis in STEM.
to believe: I left an
platform to develop a data and learning artefacts
MD/PhD program in
professional development portal throughout the learning process. What kind of students do Molecular Genetics-
for educators to learn how to Along the way, I have you get? Gene Therapy to
construct the Google AIY projects introduced many future electrical Well, that’s a very difficult go into education
and take it back to their engineers, coders, and computer question; if you are talking because I understood
classroom learning environment scientists to the magic of science the gravity of the
about socioeconomic level, we
minorities under-
and enact the curriculum. We also via the Raspberry Pi. are at the bottom of the ladder
represented in STEM
focus on educational outreach in the South Bronx, NYC. When crisis. This reality hit
using a global perspective. Since What kind of teaching it comes to health-related me like a brick when
every educator has access to programs do you run? crises, the Bronx is the worst of I was taking some
Google Classroom, we have I am running a cutting-edge the five boroughs in New York advanced courses in
opened the learning portal to STEM program in the Alchemist City. Let’s not talk about Physical Chemistry,
Thermodynamics,
educators all over the planet. Club Studios to prepare the next poverty, housing, education,
Quantum Mechanics,
murder, suicide. You name it! Quantum Computing,
However, these social
 e’ve since trained over 1000
W dilemmas have nothing to do
and other emerging
topics in the physical

teachers through the programme with cognitive abilities. Many of

my kids are currently at MIT and
and biological
sciences during my
undergrad/graduate
other prestigious colleges and
years. Most of the
Why Raspberry Pi? generation of Google, Microsoft, universities all over the United
time, either I was the
The Raspberry Pi is a bridge to Apple, Facebook, Amazon, IBM, States and abroad. Therefore, I only African American
‘physical computing’ in Nvidia… etc. engineers. As Alan know my instructional theory is student in the class
education. To be honest with Kay once said, “The best way to measurable. I have found a way or one of the very
you, it’s the ideal platform that predict the future is to invent to galvanise them to stay focus few who were astute
can be used to train the next enough to make it
it.” That’s exactly what we are in school because they love the
through the gauntlet.
generation of computer doing in the Alchemist Club cutting-edge projects we are
Quite honestly, this
scientists, starting at elementary Studios. We have found an doing in the learning space. is a serious problem
school level. I’ve been using the approach which can be used to Especially the Google AIY Project in education.”
Raspberry Pi in my science address the ‘digital divide‘ and we have enacted.

Dr Wednaud Ronelus magpi.cc 83

 THIS MONTH IN RASPBERRY PI

This Month in
Raspberry Pi
#MonthOfMaking
You’ve been making and sharing – here’s some of our faves!

A
t the time of writing, #MonthOfMaking 01
is far from over. Many of you have been
having a lot of fun creating and sharing
already, though, so here’s just a small selection of
what we’ve seen so far!

01. We’re not sure if semaphore is more or less

functional than some train timetable apps
02. We’ve worked on its bigger sibling,
PiGRRL 2, and while they’re very well built,
they can be tricky!
03. 
We always, always love seeing updates
about this all-too-accurate Johnny 5 replica
04. Now that is a very cute screen
05. No it isn’t
06. Our editor Lucy even got involved by
checking out the new Adafruit 1.3” Bonnet!
07. Look out for more on this excellent project
in a future issue!
08. Astronomy is a lot of fun and not many
Raspberry Pi projects dabble in it
09. The Rusty Radio is a great looking, wood-
enclosed internet radio box!
10. We’ve seen this project in action and it is
simple, yet lovely!

84 magpi.cc #MonthOfMaking
 THIS MONTH IN RASPBERRY PI

02

04

03

06

05

08

07

09

10

#MonthOfMaking magpi.cc 85
 THIS MONTH IN RASPBERRY PI

Coolest Projects
USA 2020
Coolest Projects is back in LA to show off more amazing projects from younger makers!

A
few weeks ago, Coolest Projects USA
returned to the Discovery Cube to once
again showcase incredible young makers.
We weren’t there this year, but it sounded as
great as ever, and there are loads of amazing pics
to prove it.

01

02

04

03
01. The venue is huge
and bustles with
maker activity!
02. There were many
teams making many
kinds of projects
03. 
Showing off sewing
skills driven
by making
04. Accessibility projects,
like this ‘memory 05
assistant’, were
also featured
05. Presenting your
project is a big part of
Coolest Projects
06. Winners are treated
to a rain of ticker tape

06

86 magpi.cc Coolest Projects USA 2020

 THIS MONTH IN RASPBERRY PI

Crowdfund this! Raspberry Pi projects you

can crowdfund this month

CROWD
A PROFJUNDING
If you
ECT?
’ve launc
Raspb hed a
erry P
projec i-relate

CloverPi
t, let u d
magp s know
i@ras !
pberry
pi.org

Looking for a way to create a Raspberry Pi-based cluster

computer? CloverPi is one way you’ll be able to achieve
it using four Raspberry Pi boards. It’s already hit its
funding target, but there’s still plenty of time to back it.

kck.st/2VwQn0d

Makerversity: Summer 2020

Best of the rest!
Here are some other great
things we saw this month
“APPLE WATCH IS PUNY”
This is incredibly cyberpunk and
we assume there are keyboards
on their belt and giant power
packs in a backpack.

magpi.cc/punywatch

BATMAN 66 PINBALL
Vector Space in Central Virginia is hosting the nation's
most immersive and exciting maker camps this summer.
Our overnight camps feature a RaspberryPi alarm clock
in week one, with an in-depth
examination of materials, the use
of exciting new technologies, and
some of human kind's oldest
fabrication techniques. Each camp
is taught by leading maker
Hooking a pinball machine up to the internet is cool, but hooking educators recruited from around
a pinball machine up to the internet based on the 1966 Batman TV the country. Rising college freshmen
show is cooler. can enroll online today.
magpi.cc/batman66 Three Sessions: July 12 - August 1
Enroll at vector-space.org/makerversity
 EVENTS

POSSIBLE EVENT
CANCELLATIONS
Please follow local public health
advice and take decisions on
whether to cancel clubs or 07
06
events in consultation with the
venues that host them.
03

Raspberry Jam
Event Calendar
Find out what community-organised Raspberry
Pi-themed events are happening near you…

01. Leeds Raspberry Jam 05. Stafford Raspberry Jam

Wednesday 1 April Tuesday 14 April
Dixons Unity Academy, Leeds, UK Stafford College, Stafford, UK
magpi.cc/ZMrFtM magpi.cc/ADpvNi
There will be chances to get hands-on with more digital A meet-up for folks who have a Raspberry Pi computer
making activities through the workshop, as well as a and want to learn more about it and share ideas.
hackspace area.
06. Create Studio: Raspberry Pi Jam
02. Exeter Raspberry Jam Sunday 19 April FULL CALENDAR
Saturday 4 April Williamsburg Regional Library, Williamsburg, VA, USA
Get a full list of upcoming
Exeter Library, Exeter, UK magpi.cc/iFHsjH events for April and
magpi.cc/BXyUyu Learn or practise a new skill. Each class will be a beyond here:
A meeting for everyone interested in all things computers, demonstration of a particular machine, with time for rpf.io/jam
microcontrollers, robotics, and making. questions afterwards.

03. Dallas Young Makers Club 07. Castro Valley Jam

Saturday 11 April Saturday 25 April
J. Erik Jonsson Central Library, Dallas, TX, USA Castro Valley Library, Castro Valley, CA, USA
dallasyoungmakers.org magpi.cc/ipGYMb
Free mentor-led hands-on projects for kids with Raspberry If you’re interested in computer coding, you can tinker and
Pi, Lego Mindstorm robots, and more. code electronics at the Castro Valley Jam.

04. South Devon Tech Jam 08. Raspberry Jam Zelzate

Saturday 11 April Saturday 25 April
Paignton Library and Information Centre, Paignton, UK Openbare Bibliotheek Zelzate, Zelzate, Belgium
magpi.cc/hgByVV magpi.cc/UVVw5h
A monthly informal and friendly session for anyone Everyone is welcome to start, share, and work on their own
interested in technology, regardless of age or ability. project(s) in a fun and relaxed atmosphere.

88 magpi.cc Raspberry Jam Event Calendar

 EVENTS

08

FIND OUT
ABOUT JAMS
Want a Raspberry Jam
in your area? Want to
start one?
[email protected]

We’ve highlighted some of the areas

in need of a Jam! Can you help out?

Raspberry Jam advice:

Risk assessment
“R
isk assessment is about achieving a
balance between a reasonable level
of risk, and being able to get on with
organising your activities. Remember, no
activity is completely free from risk, and
doing a risk assessment is not about making
01 your activities risk-free.”

05 Resource Centre

Every Raspberry Jam is entitled to apply for a

02 Jam starter kit, which includes magazine issues,
printed worksheets, stickers, flyers, and more.
04 Get the book here: rpf.io/guidebook

Raspberry Jam Event Calendar magpi.cc 89

 presents

Build Your Own

FIRST-PERSON
SHOOTER
in Unity
Making a fast-paced 3D action game needn’t
be as daunting as it sounds. Build Your Own
First-Person Shooter in Unity will take you step-
by-step through the process of making Zombie
Panic : a frenetic battle for survival inside a
castle heaving with the undead.

IN THE PROCESS,
YOU’LL DISCOVER HOW TO:
Set up and use the free Create and texture 3D Make enemies that follow
software you’ll need character models and attack the player

Design a level with Extend your game further,

locked doors and keys with tips from experts

Available now: wfmag.cc/fps

 YOUR LETTERS

Your
Letters
Reading at home
I’m looking for more stuff to read
while at home and was wondering
if there was a way to read all of
The MagPi at all? Do you have like
a big bundle magazine offer I can
get from you at all?

Kath via Facebook

Yes and no – while we can’t offer a

big pack of all our magazines as
we don’t reprint, you can get
every issue for free as a PDF from
our website. Just head over to
magpi.cc/issues to find them all. New release
import baby from mother&father
print("Hello World!")

Hi The MagPi,
My Daughter Zivah was born on Tuesday! Daddy's first present to
her? A Raspberry Pi of course! (Although, I think it'll be a few years
until it comes in use, so I might have to use it for now.)
Could I get this little photo attached and a small passage in The
MagPi letters section, just as something so I can show her when
she’s older? #codersofthefuture!

Jeremy via email

Your wish is our command. We hope she gets to enjoy her Raspberry Pi
Remember, our PDFs are free from our website if you
need another way to stock your library! in the future in whatever way she desires!

92 magpi.cc Your Letters

 YOUR LETTERS

#MonthOfMaking the first

As [requested] in the last issue,
please find in this email my
project with Raspberry Pi I want
to share: magpi.cc/babymonitor.
It’s a dual baby monitor, made
with one master Raspberry Pi 3
The Adafruit 16-channel
and two Raspberry Pi Zero with a PWM/Servo Bonnet is great
Raspberry Pi Camera Module for for remote control functions

each. Both Raspberry Pi Zero

boards have no SD card, reducing
the overall cost. Their firmware
is fed by the master Raspberry
Pi 3. I can watch both MJPEG
streams on my local network and
it works very well (at the time of
writing, I have more than 150
days of uptime). It's robust,
simple, and works with every
web browser, even old ones.
The tutorial is quite outdated
and worth a good update, but
some other forum members
managed to achieve a
functional setup. #MonthOfMaking the second
Laurent via email Please have a look at the tutorial to build a ‘Remote control of
model making with Raspberry Pi’: magpi.cc/rcpi.
Wow, this is a cool project! We In the eighties, you had to build a lot yourself. This is different
hope during the #MonthOfMaking today. You only need a Phillips screwdriver for the right change
you decide to give it a bit of an and you can build the most beautiful model with prefabricated
update for a more modern parts. The remote control is usually added almost for free.
Raspberry Pi! Since I used to develop and build transmitters and receivers
myself, I asked myself if this is possible with a Raspberry Pi.

Bernd via email

Model building and modifying is something we’re quite fond of, so

thank you for sending us this tutorial on how folks can do their own
custom remote-controlling! If anyone uses it in their
#MonthOfMaking projects, let us know!

Contact us!
> Twitter @TheMagPi
> Facebook magpi.cc/facebook
> Email [email protected]
 he use of white USB cables with
T
the official case makes this very
> Online raspberrypi.org/forums
aesthetically pleasing

Your Letters magpi.cc 93

Join us as we lift the lid
on video games

Visit wfmag.cc to learn more

 COMPETITION

WIN ONE OF TEN

ARGON ONE
CASES!
The Argon ONE case won our
thermal performance test,
and now you can win one!

The Argon ONE for

Raspberry Pi 4 is the
case that enhances the full
potential of Raspberry Pi, from
desktop computing, media and
gaming to projects with GPIO.

Head here to enter: magpi.cc/win Learn more: magpi.cc/argonone

Terms & Conditions

Competition opens on 25 March 2020 and closes on 30 April 2020. Prize is offered to participants worldwide aged 13 or over, except employees of the Raspberry Pi Foundation, the
prize supplier, their families, or friends. Winners will be notified by email no more than 30 days after the competition closes. By entering the competition, the winner consents to any
publicity generated from the competition, in print and online. Participants agree to receive occasional newsletters from The MagPi magazine. We don’t like spam: participants’ details
will remain strictly confidential and won’t be shared with third parties. Prizes are non-negotiable and no cash alternative will be offered. Winners will be contacted by email to arrange
delivery. Any winners who have not responded 60 days after the initial email is sent will have their prize revoked. This promotion is in no way sponsored, endorsed or administered by,
or associated with, Instagram or Facebook.

Competition magpi.cc 95
 SUBSCRIBE AND

SAVEUP
TO

35%
on the cover price

ISSUE #29

OUT NOW
hsmag.cc
 NEXT MONTH

EDITORIAL
Editor
Lucy Hattersley
[email protected]

Features Editor
Rob Zwetsloot
[email protected]

Sub Editors
Phil King and Nicola King

ADVERTISING
Charlotte Milligan
[email protected]
+44 (0)7725 368887

HOME
DESIGN
criticalmedia.co.uk

Head of Design
Lee Allen

Designers
Sam Ribbits, Harriet Knight

Illustrator
Sam Alder

CONTRIBUTORS
Mike Cook, David Crookes,
PJ Evans, Rosemary Hattersley,
Nicola King, Simon Monk

AUTOMATION
PUBLISHING
Publishing Director
Russell Barnes
[email protected]

Director of Communications

MAKE YOUR SMART HOUSE

Liz Upton

CEO

WITH RASPBERRY PI DIY Eben Upton

DISTRIBUTION
Seymour Distribution Ltd
2 East Poultry Ave,
London EC1A 9PT
+44 (0)207 429 4000

SUBSCRIPTIONS
Unit 6 The Enterprise Centre
Kelvin Lane, Manor Royal,
Crawley, West Sussex, RH10 9PE
+44 (0)1293 312193
magpi.cc/subscribe

THE MAGPI #93 [email protected]

ON SALE 30 APRIL This magazine is printed on paper sourced

from sustainable forests and the printer
operates an environmental management

Plus!
system which has been assessed as
conforming to ISO 14001.

DON’T MISS OUT! The MagPi magazine is published by

The Octopede robot Raspberry Pi (Trading) Ltd., Maurice Wilkes

Learn Java and magpi.cc/subscribe Building, St. John’s Innovation Park, Cowley
Road, Cambridge, CB4 0DS. The publisher,
editor, and contributors accept no
electronics responsibility in respect of any omissions
or errors relating to goods, products, or
Create your own magic TWITTER @TheMagPi services referred to or advertised in the
magazine. Except where otherwise noted,
mirror modules content in this magazine is licensed under
FACEBOOK fb.com/MagPiMagazine a Creative Commons Attribution-
ZX Spectrum Next NonCommercial-ShareAlike
3.0 Unported
Accelerated reviewed EMAIL [email protected] (CC BY-NC-SA 3.0).
ISSN: 2051-9982.
 THE FINAL WORD

Come together, separately

Now is the time for us to stand together (a few feet apart). By Lucy Hattersley

I
’ll let you in on a secret: The MagPi Jams, last year’s Scratch Conference, our website (magpi.cc). Feel free to
magazine team has always been and the birthday parties. add comments below each story. Write
mobile. We work in various towns Community and sharing are more to us at [email protected]; we
and cities, mostly in the UK. difficult right now, and I have little to will respond.
There are Raspberry Pi Towers in add on that subject. In the words of And please take out a subscription
Cambridge, and we return to the the great Rod Stewart: “I don’t want to to a magazine. I don’t mind which one
mothership from time to time, but talk about it.” you subscribe to (obviously, there are
we’re happily floating around our Talking about it is a job for one or two I recommend).
parts of the world. somebody more eloquent. Raspberry Print publications are wonderful,
It’s been a long time since I was a Pi Foundation’s Chief Executive Philip physical, tactile things. They are made
9-to-5er chained to an office desk. Colligan has written a wonderful blog with love by people who care; curated
When I first broke free from the office post about the organisation’s response by experts and written by heartfelt
routine, I used the time and learned to (magpi.cc/eventresponse) enthusiasts. They pop through the
door once a month like a surprise
 rint publications are wonderful, physical,
P present, and they always cheer me up.
Magazines – even if they think
tactile things they’re about caravans, or fishing,
or knitting – are always about
program with MITx’s Computational From the many wise words in community. The word comes from
Thinking using Python XSeries Philip’s post, this caught my eye: the French ‘magasin’ meaning,
(magpi.cc/mitpython). “[Raspberry Pi] has always been an ‘storehouse’; it’s about collecting
Coding is important, but I don’t organisation and a community where things together: in this case, people.
think it matters what you learn: paint people genuinely care about and There’s a nerd joke: ‘Now is the time
a picture, learn cheese-making, or support each other. Let’s all double for us to come together; separately;
artificial intelligence computing down on that now.” in our own homes.’ Drum rolls;
paradigms, or how to play the flute; or The MagPi magazine is our refuge. everybody laughs.
make some incredible gadget with a Here is where we all come to learn There are lots of ways we can come
Raspberry Pi and wires. about the amazing projects being built together. Let’s use them.
Learning from and teaching others by the community; it’s a platform for
is the ‘root and heart and soul and you to share your creations.
Lucy Hattersley
AUTHOR

centre’ of Raspberry Pi. It’s not just We are a sociable bunch. You’ll find
what we do: it’s what we are. us on Facebook (magpi.cc/facebook)
Lucy is editor of The MagPi magazine.
and Twitter (magpi.cc/twitter).
Social-distancing amateur-professional.
Sharing for the soul Be especially sure to join in on our May be distracted by Animal Crossing. Bit
The other thing I love about Raspberry #MyLatestBuild and #MagPiMonday nerdy but really likes to hug, which is awks
Pi is the community. I adore going to Twitter chats. If you don’t care for at the best of times.

events like Pi Wars, and the Raspberry social media, we post stories daily on magpi.cc

98 magpi.cc Come together, separately