Scribd
Upload
47 views

Emitter-Coupled Logic Element Simulation PDF

This document contains simulation code for modeling an emitter-coupled logic (ECL) inverter circuit using Silvaco ATLAS. It defines the device geometry, material properties, electrical connections, and simulation steps to characterize the DC and transient behavior of the circuit consisting of two bipolar junction transistors.

Uploaded by

Ali Tayefeh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Emitter-Coupled Logic Element Simulation PDF

This document contains simulation code for modeling an emitter-coupled logic (ECL) inverter circuit using Silvaco ATLAS. It defines the device geometry, material properties, electrical connections, and simulation steps to characterize the DC and transient behavior of the circuit consisting of two bipolar junction transistors.

Uploaded by

Ali Tayefeh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Emitter-Coupled Logic Element Simulation

# (c) Silvaco Inc., 2017


go atlas
#

mesh space.mult=1.0
#
x.mesh loc=0.00 spac=0.10
x.mesh loc=3.00 spac=0.10
#
y.mesh loc=0.00 spac=0.025
y.mesh loc=0.35 spac=0.025
y.mesh loc=1.500 spac=0.15

#
region num=1 silicon
#
# Electrodes #1 -emitter; #2 -base; #3 -collector
#
elec num=1 left length=1.0 name=emitter
elec num=2 right length=1.0 name=base
elec num=3 substrate name=collector
#
# Impurity profile
#
doping uniform conc=3.0e16 n.type
doping gauss conc=5.0e18 p.type junc=0.35
doping gauss conc=5.0e20 n.type junc=0.15 x.r=1.0 ratio=0.75
doping gauss conc=2.e19 n.type char=0.2 peak=1.4

save outf=bjtex09_0.str
tonyplot bjtex09_0.str -set bjtex09_0.set
#

go atlas
.begin
#
# ECL inverter - DC point simulation
# ‫دو ترانزیستور با ساختار تعریف‬
vin 1 0 -1.8 ‫ در مدار شبیه‬،‫شده در قسمت باال‬
ai 1=base 4=collector 2=emitter infile=bjtex09_0.str width=1. ‫سازی شده است که امکان شبیه‬
an 3=base 5=collector 2=emitter infile=bjtex09_0.str width=1.
rci 4 0 2k ‫سازی چند المان به صورت‬
rcn 5 0 2k .‫همزمان را نشان می دهد‬
vref 3 0 -1.4
iee 2 7 0.4mA
ree 2 7 100k
vcc 7 0 -5.2
rei 8 7 500
ren 6 7 500
cei 8 0 5f
cen 6 0 5f
qi 0 4 8 7 modbjt
qn 0 5 6 7 modbjt
#
.model modbjt npn is=1.e-17 bf=100 cje=1f tf=5ps cjc=0.3f rb=100 \
rbm=20
#
.nodeset v(1)=-1.8 v(2)=-1.8 v(3)=-1.4 v(4)=-1. v(5)=-1. v(6)=-1. v(7)=-5.2
v(8)=-1.8
.numeric vchange=0.25 imaxdc=50
.options m2ln print
#
.save outfile=ecldc
#
.end
#
# ATLAS models
#
models device=ai reg=1 bipolar
models device=an reg=1 bipolar

go atlas
.begin
#
# ECL inverter - transient simulation
#
vin 1 0 -1.8 pulse -1.8 -0.9 0. 20ps 20ps 200ps 2000
ai 1=base 4=collector 2=emitter infile=bjtex09_0.str width=1.
an 3=base 5=collector 2=emitter infile=bjtex09_0.str width=1.
rci 4 0 2k
rcn 5 0 2k
vref 3 0 -1.4
iee 2 7 0.4mA
ree 2 7 100k
vcc 7 0 -5
rei 8 7 500
ren 6 7 500
cei 8 0 5f
cen 6 0 5f
qi 0 4 8 7 modbjt
qn 0 5 6 7 modbjt
#
.model modbjt npn is=1.e-17 bf=100 cje=1f tf=5ps cjc=0.3f rb=100 \
rbm=20
#
.options print
#
.log outfile=bjtex09
.load infile=ecldc
#
.tran 1ps 1ns
#
.end
#
# ATLAS device input deck
#
models device=ai reg=1 bipolar
models device=an reg=1 bipolar

go atlas
tonyplot bjtex09_tr.log -set bjtex09_tr_log.set
quit

You might also like