Name :

Roll No:

ANURAG GROUP OF INSTITUTIONS

Autonomous
School of Engineering
II- B. Tech-I-Semester Lab Internal Examination
Subject: Mechanics of Solids Lab
(Only for MECH-)
Date: XX-XX-XXXX Session: XN
Time: 30Mins Max.marks:30(Evaluated to 10M)
 Answer ALL questions, each question carry equal mark

1. Which type of motor is used in the UTM? [ d ]

[a] 1 Ø [b] three phase [c] 3 Ø [d] both b and c
2. Which type of threading is used in the UTM? [ b ]
[a] orthogonal [b] rectangular [c] square [d] diagonal
3. Power supply is ___ in rectangular threading to lift the loading platform. [ c ]
[a] equal [b] less [c] more [d] zero
4. _____ is the ratio of shear stress to the shear strain [ a ]
[a] young’s modulus of elasticity [b] tensile strength [c] Poisson’s ratio [d] both a and c
5. What is the unit for young’s modulus of elasticity? [ d ]
2 2
[a] kN/mm [b] kN.mm [c] N/mm [d] kN/mm
6. ________ measures and indicates the load on the specimen. [ b ]
[a] Hardness testing machine [b] dynamometer [c] UTM [d] Torsion testing machine
7. When a section is subjected to two equal and opposite pulls and the body tends to
increase its length, the stress induced is called _____ [ a ]
[a] tensile stress [b] compressive stress [c] shear stress [d] volumetric strain
8. When a section is subjected to two equals and opposite pushes and the body tends to
decrease its length, the stress induced is called _____ [ b ]
[a] tensile stress [b] compressive stress [c] shear stress [d] volumetric strain
9. ____ represents the resistance developed by a unit area of cross section [ a ]
[a] unit stress [b] unit strain [c] volumetric strain [d] elastic limit
10. ___ is a ratio between the change in volume and original volume of the body [ c ]
[a] linear strain [b] lateral stain [c] volumetric strain [d] unit strain
11. Relation between the modulus of elasticity (E) and modulus of rigidity (C) is? [ a ]
[a] E = 2C (1+1/m) [b] E = C (1+1/m) [c] E = 3C (1+1/m) [d] E = 2C (1+m)
12. The ratio of lateral strain to linear strain is known as ____ [ d ]
[a] modulus of rigidity [b] modulus of elasticity [c] volumetric strain [d] Poisson’s ratio
13. What is the relation between E, K & C? [ c ]
[a] E = KC/3K+C [b] E = 9K/3K+C [c] E = 9KC/3K+C [d] E = 9C/3K+C
14. ____ is the deformation of the bar per unit length in the direction of the force. [ a ]
[a] linear strain [b] volumetric strain [c] unit strain [d] shear strain
15. Beam is a ________ member [ b ]
[a] elastic [b] structural [c] universal [d] plastic
16. ____ is the deformation of a bar produced by loads perpendicular to its axis [ a ]
[a] bending [b] deflection [c] blending [d] bonding
17. If the plane of loading passes through one of the principle centroidal axis of the cross
section of the beam; the bending is said to be ____ [ d ]
[a] plane bending [b] direct bending [c] bending [d] both a and b
18. If the plane of loading does not pass through one of the principle centroidal axis of the
cross section of the beam, the bending is said to be ______ [ b ]
[a] orthogonal [b] oblique [c] diagonal [d] unique
19. The Maxwell reciprocal theorem states that the ___ of a beam at any intermediate point
‘D’ due to the load at the point ‘C’ will be same as the deflection at point ‘C’ due to
load at point ‘D’ [ c ]
[a] bending [b] defection [c] deflection [d] all of the above
20. What are the units of bending moment? [ a ]
2 2
[a] Nmm [b] N/mm [c] N/mm [d] N/m
21. M/I = σb /Y is ____ equation [ d ]
[a] deformation [b] bonding [c] deflection [d] bending
22. A continuous beam is one which has more than ___ supports [ b ]
[a] three [b] two [c] one [d] none of the above
23. A ____ beam is one whose both ends are rigidly fixed or built is into its supporting walls
or columns [ a ]
[a] fixed [b] simply supported [c] continuous [d] over hanging
24. A ____ beam is one in which the supports are not situated at the ends i.e., both the ends
project beyond the support. [ a ]
[a] over hanging [b] continuous [c] simply supported [d] fixed
25. What are the units of moment of Inertia? [ d ]
3 4 3 4
[a] Mm [b] Nm [c] Nm [d] Mm
26. What are the Units of bending stress? [ c ]
2 2 3
[a] N-mm [b] N-mm [c] N/mm [d] N/mm
27. Choose the option for Deflection of beam or specimen? [ a ]
3 2 3
[a] δ = wl /48EI [b] δ = wl /48EI [c] δ = l /48EI [d] δ = w/48EI
28. The torque is the ___ effect of a force about the axis of rotation [ d ]
[a] linear [b] rotating [c] planar [d] turning
29. The total _____ energy stored in a body is known as resilience [ b ]
[a] elastic [b] strain[c] plastic [d] mechanical
30. ______ is the torsion equation [ a ]
 [a] T/J = G θ /L [b] T/J = G/L [c] T/J = θ /L [d] none of the above
31. ____ is the energy stored in a body when stressed in the elastic limit [ d ]
[a] mechanical [b] kinetic [c] potential [d] strain
32. _____ is the ratio of shear stress to the shear strain [ a ]
[a] modulus of rigidity [b] volumetric strain [c] Poisson’s ratio [d] cannot say
33. ______ is the torque equation [ a ]
[a] T/J = τ /R = G θ /L [b] T/J = τ /R = G/L [c] T/J = τ /R = θ /L [d] none of
the above
34. The property of certain materials returning back to its original position after the removal
of external force is known as ___ [ c ]
[a] malleability [b] plasticity [c] elasticity [d] ductility
35. __ is defined as ability of material to resist abrasion, scratching or indentation.[ b ]
[a] toughness [b] hardness [c] stiffness [d] none of the above
36. Equation for calculating hardness number using Brinell hardness test [ a ]

[a] BHN=2P/ π D (D- √( D2 -d 2

) [b] BHN=2P/ π d (D- √( D2 -d 2
)

[c] BHN=P/ π D (D- √( D2 -d 2

) [d] BHN=2P/ π D (d- √( D2 -d )
2

37. _______ is the strength with which the material opposes rupture [ b ]
[a] hardness [b] toughness [c] stiffness [d] none of the above
38. ____ is the property by virtue of which material may be rolled in thin sheets without
rupture. [ d ]
[a] ductility [b] elasticity [c] plasticity [d] malleability
39. The _________ properties of materials under applied force (or) loads are called
mechanical properties [ b ]
[a] macroscopic [b] microscopic [c] both a and b [d] none of the above
40. The combined effect of external forces acting on a body is called ___ [ b ]
[a] point load [b] load [c] UDL [d] UVL
41. ____ Strength is the high resistance of material to fracture under suddenly applied loads.
[ a ]
[a] impact [b] tensile [c] compressive [d] shear
42. The load which falls from a height or strike the body with certain momentum is called
____ [ d ]
[a] point load [b] UVL [c] UDL [d] impact load
43. When the load is applied all of sudden and not step wise is called as ____ applied load.
[ b ]
[a] gradually [b] suddenly [c] unexpectedly [d] all of the above
44. A body is said to be acted upon by a gradually applied load if the load increases from
zero and it reaches its final value stepwise is called ____ applied load. [ a ]
[a] gradually [b] suddenly [c] unexpectedly [d] all of the above
45. What is the unit of impact energy [ a ]
 [a] KJ [b] Kg [c] KN [d] Km
46. The springs are __ members and extensively used to absorb shocks. [ c ]
[a] elastic [b] resilient [c] both a and b [d] structural
47. Coiling the wire in the form of helix forms the ___ spring. [ c ]
[a] torsion [b] leaf [c] helical [d] laminated
48. There is always limiting value of a load up to which the strain totally on the removal of
the load, the stress corresponding to this load is called ____ limit [ d ]
[a] plastic [b] endurance [c] yield [d] elastic
49. 1/K = 1/K1 + 1/K2 is the total stiffness when the springs are in __ [ b ]
[a] parallel [b] series [c] horizontal [d] vertical
50. K = K1 + K2 is the total stiffness when the springs are in __ [ c ]
[a] horizontal [b] parallel [c] series [d] vertical
51. U = ½ x W x δ is the __ energy stored in the springs [ a ]
[a] strain [b] impact [c] both a and b [d] elastic
52. The total strain energy stored in a body is known as ___ [ a ]
[a] resilience [b] impact strength [c] both a and b [d] none of the above
53. The resistance of a material to elastic deformation is called ____ [ d ]
[a] hardness [b] stress [c] toughness [d] stiffness
54. If deformation decreases stiffness _____ [ a ]
[a] increases [b] decreases [c] becomes zero [d] can’t say
55. Units of stiffness [ b ]
2 2
[a] Kg/mm [b] Kg/mm [c] Kg-mm [d] Kg-mm