Scribd
Upload
2K views1 page

Diagnostic Trouble Codes and Suggested Actions: Description DTC Stored (Y/N) Remarks Suggested Action

This document provides diagnostic trouble codes (DTCs) and suggested actions for resolving issues with a tachograph. It lists various error codes, a description of each error, whether the code is stored, and recommended steps to address it such as resetting the device, checking connections, or ensuring a chart is present. Common issues involve communications errors, sensor or motor failures, and missing or incorrectly placed charts. The suggested actions help technicians properly diagnose and troubleshoot tachograph systems.

Uploaded by

Florian Pjetri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Diagnostic Trouble Codes and Suggested Actions: Description DTC Stored (Y/N) Remarks Suggested Action

This document provides diagnostic trouble codes (DTCs) and suggested actions for resolving issues with a tachograph. It lists various error codes, a description of each error, whether the code is stored, and recommended steps to address it such as resetting the device, checking connections, or ensuring a chart is present. Common issues involve communications errors, sensor or motor failures, and missing or incorrectly placed charts. The suggested actions help technicians properly diagnose and troubleshoot tachograph systems.

Uploaded by

Florian Pjetri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIAGNOSTIC TROUBLE CODES and SUGGESTED ACTIONS

Description DTC Stored Remarks Suggested Action


(Y/N)

Internal Error A00C Y Internal device error. Reset Tachograph and clear DTC.

LCD Error 9010 Y Error state signalled by LCD Check fascia functions (keypress, display,
driver of fascia communications etc.)

Tachograph Power Supply A400 Y Reset of processor triggered by Check power supply and connections.
power interruption.

Drawer Error 9060 Y Drawer catch failure Clear DTC and check drawer function.

Speed Rack Error 9061 Y Speed rack motor or opto failure. Clear DTC, reset Tachograph and retest
Tachograph.

May be caused by badly placed chart.

Duty Rack Error 9062 Y Duty rack motor or opto failure Clear DTC, reset Tachograph and retest
Tachograph.

May be caused by badly placed chart.

Cam Error 9063 Y Cam motor or opto failure Clear DTC, reset Tachograph and retest
Tachograph.

Chart Table Error 9064 Y Chart table motor or opto failure. Clear DTC, reset Tachograph and retest
Tachograph.

May be caused by badly placed chart.

Sender-Tachograph Key/Serial A822 Y Encrypted data errors Clear DTC and re-pair Tachograph to
Number Mismatch Sender. Also check wiring to B-socket.

Sender-Tachograph A423 Y Encrypted communications errors Check Tachograph settings – Sender


Communications Problem (encrypted sender) or Type. Pair sender if encrypted. Also
complimentary signal failure (4 check wiring to B-socket.
wire sender) or sender
disconnection.

CAN Bus Communication Error A411 Y Cluster present message not Check if instrument cluster matches
With Instrument Cluster being received Tachograph display. Also check wiring.

CAN Bus Off 900B Y CAN bus halted due to excessive Clear DTC.. Check Tachograph settings –
errors CANBus enabled and Customer Type.

Possibly no CANBus present in vehicle

CAN Bus Error 900A Y CAN bus in passive error mode Clear DTC. Possibly no CANBus present
in vehicle. Check Tachograph CANBus
settings.

V-pulse Output Error 9430 Y Hardware monitoring of V-Pulse Clear DTC. Disconnect all V-pulse
output. supported equipment. Retest
Tachograph. If DTC does not reappear,
suspect V-pulse driven equipment.

Keyboard Error 900F Y Keys held down for excessive Clear DTC. Check all keys/buttons on
period Tachograph. Retest Tachograph.

Calibration Error A00E Y Unit not installed or requires Check Tachograph settings – Install Date
servicing. and Service Delay. Clear DTC, retest
Tachograph. This service delay applies to
Tachograph fitted with RTC only – DC,
Renault, MAN.

Driving without Chart A050 N Speed pulses detected with Ensure Driver chart present and drawer
drawer open, driver chart missing properly closed.
or chart recording complete.

No Driver Chart Present 9051 N Drawer closed with no driver Ensure Driver chart present.
chart present

No Crew Chart Present 9052 N Drawer closed with no crew chart Ensure Crew chart present if required.
present

You might also like