Scribd
Upload
53 views

Bp3 Konsorsium Construction Service Work Unit Rate Package C Next Generation (Cs Wur C NG)

This document provides information on calculating the blow count of driven piles using the Danish formula. It gives the formula and defines the variables used, including the hammer efficiency value that can range from 0.75 to 1.0 depending on the type of hammer used. It then provides sample data for a pile design including the design load, pile dimensions, hammer weight, and drop height. It performs calculations using the provided data and Danish formula to determine values like ultimate bearing capacity, energy per blow, elastic compression, penetration per blow, and estimated blow count per foot of penetration.

Uploaded by

Edward Hutauruk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views

Bp3 Konsorsium Construction Service Work Unit Rate Package C Next Generation (Cs Wur C NG)

This document provides information on calculating the blow count of driven piles using the Danish formula. It gives the formula and defines the variables used, including the hammer efficiency value that can range from 0.75 to 1.0 depending on the type of hammer used. It then provides sample data for a pile design including the design load, pile dimensions, hammer weight, and drop height. It performs calculations using the provided data and Danish formula to determine values like ultimate bearing capacity, energy per blow, elastic compression, penetration per blow, and estimated blow count per foot of penetration.

Uploaded by

Edward Hutauruk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BP3

KONSORSIUM
CONSTRUCTION SERVICE
WORK UNIT RATE PACKAGE ‐ C NEXT GENERATION (CS WUR‐C‐NG)

BLOW COUNT CALCULATION OF DRIVING PILE


DANISH FORMULA
PILE SET FOR PILING PIPE ASTM A252 LOCATION : TDU Area‐6
SR. NO. : 1265954

DANISH FORMULA :
Hammer Efficiency Value :
Varian of Hammer Value
1 Drop Hammer 0,75 ‐ 1,00
2 Single Acting Hammer 0,75 ‐ 0,85
in which : 3 Double Acting Hammer 0,85
4 Diesel Hammer 0,85 ‐ 1,00

DATA :
P = Design load on pile (Reff. From Drawing) = 40 tons
Wh = Weight of Hammer = 1730 Kg
H = Height of Drop = 150 cm
E = Modulus of Elasticity of pipe pile = 29000000 psi
L = Length of Pile = 12 Mtr
Do = Outer Diameter of Pile = 12.75 in
Di = Inner Diameter of Pile = 12 in

P = Design Load on Pile = 88184 Lb


SF = Safety Factor = 3
QU = Ultimate Bearing Capacity = 264552 Lb
Wh = Weight of Hammer = 3813.96 Lb
E = Modulus of Elasticity of pipe pile = 29000000 psi
H = Height of Drop = 59.06 in
EB = Energy per Blow = 225233.86 Lb.ft
Eff = Pile driving hammer efficiency = 0.75
L = Length of Pile = 39.37 ft
Do = Outer Diameter of Pile = 12.75 in
Di = Inner Diameter of Pile = 12 in
2
A = Cross Sectional Area = 113.040 in
WP = Weight of Pile = 880.433 Lb
Se = Elastic Compression of the pile, =((2 x Eff x Wh x L)/(A x E)) 1/2 = 0.099 in
S = Amount of pile penetration per blow = 0.589 in/blow
Blow count per 1 ft of Penetration = 20.380 blow/ft
~ 20.000 blow/ft

Prepared by, Reviewed by, Approved by,

BP3 Konsorsium RW CPI

Danish Pile Driving Formula


BP3 Konsorsium

You might also like