Scribd
Upload
54 views

AMS 4880-C95510: Typical Uses

Nickel-aluminum bronze is a standard-stocked product available in semi-finished or near-net shapes from 1/2" to 15" in diameter and up to 24" in length. It has applications in industrial bearings and bushings requiring abrasion resistance and retention of hardness at moderate temperatures. The alloy has a copper base with nickel, aluminum and other elements that provide its properties.

Uploaded by

Mahesh Babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

AMS 4880-C95510: Typical Uses

Nickel-aluminum bronze is a standard-stocked product available in semi-finished or near-net shapes from 1/2" to 15" in diameter and up to 24" in length. It has applications in industrial bearings and bushings requiring abrasion resistance and retention of hardness at moderate temperatures. The alloy has a copper base with nickel, aluminum and other elements that provide its properties.

Uploaded by

Mahesh Babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

C95510

3 STANDARD-STOCKED PRODUCT
AMS 4880-C95510

C as t P r o d u cts
Cast

Product Description: Nickel-Aluminum Bronze

Solids: ½" to 9" O.D.

Tubes: 11⁄8" to 13" O.D.

|
Rectangles: Up to 15"

AM S 4 8 8 0 -C 9 5 5 10
Standard Lengths: 24"

Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or
structural shape, flats/rectangular bar

Typical Uses
Industrial bearings requiring abrasion resistance/good ductility/retention of hardness at moderate temperatures,
bushings, hydraulic seal components, landing gear bushings and bearings

Similar or Equivalent Specification


CDA ASTM SAE AMS Federal Military Other

C95510 J461 4880


J462

Chemical Composition
Cu% Sn% Zn% Fe% Ni%1 Al% Mn%

78.00 2.00- 4.50- 9.70-


min 0.20 0.30 3.50 5.50 10.90 1.50

Chemical Composition according to AMS 4880


1
Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.8% min. Unless otherwise noted, single values represent maximums.

Machinability
Copper Alloy UNS No. Machinability Rating Density (lb/in³ at 68 ˚F)

C95510 50 0.272

14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956
AMS 4880-C95510 continued
AM S 4 8 8 0 -C 9 5 5 1 0

Mechanical Properties
Tensile Strength, min Yield Strength at 0.2% Elongation, in 4D, Brinell Hardness Remarks
Offset, min min

ksi MPa ksi MPa % min to max BHN

105.0 724 62.5 431 9 192 to 248 Castings <4.0, Heat Treated
95.0 655 56.0 386 9 192 to 248 Castings 4.0+, Heat Treated
|
Cas t Pr o d u cts

Mechanical Properties according to AMS 4880

14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956

You might also like