HUS3 Screw anchor

Anchor version Benefits

- High productivity less drilling and

fewer operations than with
conventional anchors
- ETA approval for cracked and
non-cracked concrete
- ETA approval for adjustability
(unscrew-rescrew)
- Seismic approval ETA C1
- High loads
- Small edge and spacing distances
- abZ (DIBt) approval for reusability
in fresh concrete (fck,cube=10/15/20
2
Nmm ) for temporary applications
- Three embedment depths for
maximum design flexibility
- HUS3-HF with multilayer coatings
for additional corrosion protection

Approvals / certificates
Description Authority / Laboratory No. / date of issue
a)
European technical assessment DIBt, Berlin ETA-13/1038 / 2014-09-19
DIBt approval (Reusability) DIBt, Berlin Z-21.8-2018 / 2014-04-01
a) All data given in this section for HUS3-H and HUS3-C according ETA-13/1038, issue 2014-09-19.
 HUS3 Screw anchor

Basic loading data (for a single anchor)

All data in this section applies to For details see Simplified design method
- Correct setting (See setting instruction)
- No edge distance and spacing influence
- Steel failure
- Minimum base material thickness
- Cracked and non-cracked Concrete C 20/25, fck,cube = 25 N/mm²
- Adjustment allowed during the installation for size 8 and 10, types H, C and h nom2 only.

Mean ultimate resistance

Data according ETA-13/1038, issue 2014-09-19.
Anchor size 8 10 14
Type HUS3 H, C H, C H
Nominal embedment
hnom [mm] 50 60 70 55 75 85 65 85 115
depth
Non-cracked concrete
Tensile NRu,m [kN] 11,9 15,9 21,2 15,9 26,6 36,8 23,2 36,2 59,0
Shear VRu,m [kN] 17,0 17,9 17,9 18,0 29,4 29,4 46,4 47,3 47,3
Cracked concrete
Tensile NRu,m [kN] 8,0 11,9 15,9 12,8 21,4 26,3 16,5 25,8 42,0
Shear VRu,m [kN] 12,1 17,9 17,9 12,8 29,4 29,4 33,1 47,3 47,3
Hilti Tech. Data
Anchor size 10 14
Type HUS3 HF HF
Nominal embedment
hnom [mm] 55 75 85 65 85
depth
Non-cracked concrete
Tensile NRu,m [kN] 15,9 26,6 36,8 23,2 36,2
Shear VRu,m [kN] 18,0 25,7 25,7 46,4 47,3
Cracked concrete
Tensile NRu,m [kN] 12,8 21,4 26,3 16,5 25,8
Shear VRu,m [kN] 12,8 25,7 25,7 33,1 47,3
HUS3 Screw anchor

Characteristic resistance
Data according ETA-13/1038, issue 2014-09-19.
Anchor size 8 10 14
Type HUS3 H, C H, C H
Nominal embedment
hnom [mm] 50 60 70 55 75 85 65 85 115
depth
Non-cracked concrete
Tensile NRk [kN] 9,0 12,0 16,0 12,0 20,0 27,8 17,5 27,3 44,4
Shear VRk [kN] 12,8 17,0 17,0 13,5 28,0 28,0 35,0 45,0 45,0
Cracked concrete
Tensile NRk [kN] 6,0 9,0 12,0 9,7 16,1 19,8 12,5 19,4 31,7
Shear VRk [kN] 9,1 17,0 17,0 9,7 28,0 28,0 24,9 38,9 45,0
Hilti Tech. Data
Anchor size 10 14
Type HUS3 HF HF
Nominal embedment
hnom [mm] 55 75 85 65 85
depth
Non-cracked concrete
Tensile NRk [kN] 12,0 20,0 27,8 17,5 27,3
Shear VRk [kN] 13,5 24,5 24,5 35,0 45,0
Cracked concrete
Tensile NRk [kN] 9,7 16,1 19,8 12,5 19,4
Shear VRk [kN] 9,7 24,5 24,5 24,9 38,9
 HUS3 Screw anchor

Design resistance
Data according ETA-13/1038, issue 2014-09-19.
Anchor size 8 10 14
Type HUS3 H, C H, C H
Nominal embedment
hnom [mm] 50 60 70 55 75 85 65 85 115
depth
Non-cracked concrete
Tensile NRd [kN] 6,0 8,0 10,7 8,0 13,3 18,5 11,7 18,2 29,6
Shear VRd [kN] 8,5 11,3 11,3 9,0 18,7 18,7 23,3 30,0 30,0
Cracked concrete
Tensile NRd [kN] 4,0 6,0 8,0 6,4 10,8 13,2 8,3 13,0 21,1
Shear VRd [kN] 6,1 11,3 11,3 6,4 18,7 18,7 16,6 25,9 30,0
Hilti Tech. Data
Anchor size 10 14
Type HUS3 HF HF
Nominal embedment
hnom [mm] 55 75 85 65 85
depth
Non-cracked concrete
Tensile NRd [kN] 8,0 13,3 18,5 11,7 18,2
Shear VRd [kN] 9,0 16,3 16,3 23,3 30,0
Cracked concrete
Tensile NRd [kN] 6,4 10,8 13,2 8,3 13,0
Shear VRd [kN] 6,4 16,3 16,3 16,6 25,9
 HUS3 Screw anchor

Recommended load
Data according ETA-13/1038, 2014-09-19.
Anchor size 8 10 14
Type HUS3 H, C H, C H
Nominal embedment
hnom [mm] 50 60 70 55 75 85 65 85 115
depth
Non-cracked concrete
Tensile NRec [kN] 4,3 5,7 7,6 5,7 9,5 13,2 8,3 13,0 21,2
Shear VRec [kN] 6,1 8,1 8,1 6,5 13,3 13,3 16,6 21,4 21,4
Cracked concrete
Tensile NRec [kN] 2,9 4,3 5,7 4,6 7,7 9,4 5,9 9,3 15,1
Shear VRec [kN] 4,3 8,1 8,1 4,6 13,3 13,3 11,9 18,5 21,4
Hilti Tech. Data
Anchor size 10 14
Type HUS3 HF HF
Nominal embedment
hnom [mm] 55 75 85 65 85
depth
Non-cracked concrete
Tensile NRec [kN] 5,7 9,5 13,2 8,3 13,0
Shear VRec [kN] 6,5 11,7 11,7 16,6 21,4
Cracked concrete
Tensile NRec [kN] 4,6 7,7 9,4 5,9 9,3
Shear VRec [kN] 4,6 11,7 11,7 11,9 18,5
a) With overall partial safety factor for action = 1,4. The partial safety factors for action depend on the type of
loading and shall be taken from national regulations.

Materials
Mechanical properties
Anchor size 8 10 10 14
Type HUS3 H, C H, C HF H, HF

Nominal tensile strength fuk [N/mm²] 810 805 705 730

Yield strength fyk [N/mm²] 695 690 605 630

Stressed cross-section As, [mm²] 48,4 77,0 77,0 131,7

Moment of resistance W [mm³] 47 95 95 213

0
Char, bending resistance M Rk,s [Nm] 46 92 81 187
 HUS3 Screw anchor

Material quality
Type Material Coating

HUS3-H / HUS3-C Carbon-steel Galvanized )

HUS3-HF Carbon-steel
HUS3 Screw anchor

Anchor dimensions
Dimensions

Anchor size 8 10 14

Type HUS3 H, C H, C, HF H, HF

Threaded outer diameter dt [mm] 10,30 12,40 16,85

Core diameter dk [mm] 7,85 9,90 12,95

Shaft diameter ds [mm] 8,45 10,55 13,80

2
Stressed section As [mm ] 48,4 77,0 131,7

rd
HUS3 : Hilti Universal Screw 3 generation
H : Hexagonal head

10 : screw diameter
45/25/15 : maximum thickness fixture tfix1/tfix2/tfix3 related to the
embedment depth hnom1/hnom2/hnom3 (see Annex B3)

Screw length and thickness of fixture for HUS3-H (hex head, galvanized)
Anchor size HUS3-H 8 10 14
hnom1 hnom2 hnom3 hnom1 hnom2 hnom3 hnom1 hnom2 hnom3
Nominal anchorage depth
50 60 70 55 75 85 65 85 115
[mm]
Thickness of fixture [mm]
Length of anchor [mm]
tfix1 tfix2 tfix3 tfix1 tfix2 tfix3 tfix1 tfix2 tfix3
55 5 - - - - - - - -
60 - - - 5 - - - - -
65 15 5 - - - - - - -
70 - - - 15 - - - - -
75 25 15 5 - - - 10 - -
80 - - - 25 5 - - - -
85 35 25 15 - - - - - -
90 - - - 35 15 5 - - -
100 50 40 30 45 25 15 35 15 -
110 - - - 55 35 25 - - -
120 70 60 50 - - - - - -
130 - - - 75 55 45 65 45 15
150 100 90 80 95 75 65 85 65 35
 HUS3 Screw anchor

Screw length and thickness of fixture for HUS3-HF (hex head, multilayer coating)
Anchor size HUS3-HF 10 14
hnom1 hnom2 hnom3 hnom1 hnom2
Nominal anchorage depth
55 75 85 65 85
[mm]
Thickness of fixture [mm]
Length of anchor [mm]
tfix1 tfix2 tfix3 tfix1 tfix2
60 5 - - - -
75 - - - 10 -
80 25 5 - - -
100 45 25 15 35 15
110 55 35 25 - -

Screw length and thickness of fixture for HUS3-C (countersunk head, galvanized)
Anchor size HUS3-C 8 10
hnom1 hnom2 hnom3 hnom1 hnom2 hnom3
Nominal anchorage depth
50 60 70 55 75 85
[mm]
Thickness of fixture [mm]
Length of anchor [mm]
tfix1 tfix2 tfix3 tfix1 tfix2 tfix3
65 15 5 - - - -
70 - - - 15 - -
75 25 15 - - - -
85 35 25 15 - - -
90 - - - 35 15 -
100 - - - 45 25 15
HUS3 Screw anchor

Setting
Installation equipment
Anchor size 8 10 14
Type HUS3 H, C H, C, HF H, HF
Rotary hammer TE 2 TE 30 TE 2 TE 30 TE 2 TE 30
Drill bit for concrete, solid clay brick and solid
CX 8 CX 10 CX 14
sand-lime brick
Drill bit for aerated concrete CX 6 CX 8 -
Socket wrench insert S-NSD 13 1/2 S-NSD 15 1/2 S-NSD 21 1/2
Torx S-SY TX45 S-SY TX50 -
Tube for temporary application (only for H type) HRG 8 HRG 10 HRG 14
Setting tool for concrete C12/15 to C50/60 SIW 22T-A
Setting tool for solid brick and aerated concrete SFH 22A
Setting tool for hollow core slab SIW 22 A

Setting details for concrete

Anchor size 8 10 14
Type HUS3 H, C H, C, HF H, HF H
Nominal anchorage depth hnom [mm] 50 60 70 55 75 85 65 85 115
Nominal diameter of drill bit do [mm] 8 10 14
Cutting diameter of drill bit dcut [mm] 8,45 10,45 14,50
Depth of drill hole h1 [mm] 60 70 80 65 85 95 75 95 125
Diameter of clearance hole in
df [mm] 12 14 18
the fixture
Diameter of countersunk head dh [mm] 18 21 -
Width across (H, HF types) SW [mm] 13 15 21
Torx (C type) TX [-] 45 50 -
Impact screw driver Hilti SIW 22 T-A