SS-SHAKE5/SHAKE7/SHAKE6D

SS-SHAKE5P/SHAKE7P

SERVICE MANUAL US Model

Ver. 1.2 2014.01
AEP Model
UK Model
Australian Model
SS-SHAKE5

Russian Model
Thai Model
SS-SHAKE6D

E Model
SS-SHAKE5/SHAKE7/SHAKE6D

Argentina Model
SS-SHAKE7

SS-SHAKE7 SS-SHAKE5/SHAKE6D Malaysia Model

Saudi Arabia Model
• SS-SHAKE5 is front speakers in SHAKE-5. South African Model
• SS-SHAKE7 is front speakers in SHAKE-7. SS-SHAKE7/SHAKE6D
• SS-SHAKE6D is front speakers in SHAKE-6D.
• SS-SHAKE5P is the package speaker of front speakers in SHAKE-5. Mexican Model
• SS-SHAKE7P is the package speaker of front speakers in SHAKE-7. SS-SHAKE5/SHAKE7

SPECIFICATIONS

Speakers • JIG
Speaker system When disassembling the set, use the following jig (for front panel
3-way, Bass reflex (SS-SHAKE5/SHAKE6D) removal).
4-way, Bass reflex (SS-SHAKE7) Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
Speaker unit
Woofers: 200 mm (7 7/8 in), cone type
Tweeters: 25 mm (1 in), horn type
Mid speakers: 100 mm, cone type (SS-SHAKE7)
Subwoofers: 350 mm (13 7/8 in), cone type
(SS-SHAKE5/SHAKE6D)
380 mm, cone type (SS-SHAKE7)
Rated impedance
Tweeters/woofers: 4 ohms
Mid speakers: 5 ohms (SS-SHAKE7)
Subwoofers: 4 ohms
Dimensions (w/h/d) (Approx.)
490 mm × 660 mm × 360 mm
(SS-SHAKE5/SHAKE6D)
(19 3/8 in × 26 in × 14 1/4 in)
510 mm × 750 mm × 446 mm (SS-SHAKE7: Except AR)
Dimensions (w/h/d) (SS-SHAKE7: AR)
510 mm × 750 mm × 446 mm
Mass (Approx.)
26.5 kg (58 lb 7 oz) (SS-SHAKE5/SHAKE6D)
32 kg (SS-SHAKE7: Except AR)
Mass (SS-SHAKE7: AR)
32 kg
Quantity: 2 pieces

Design and specifications are subject to change without notice.

SPEAKER SYSTEM
9-890-620-03
2014A80-1 Sony Corporation
© 2014.01 Published by Sony EMCS (Malaysia) PG Tec
SS-SHAKE5/SHAKE7/SHAKE6D
SECTION 1
DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards. For Schematic Diagrams.
Note: Note:
• X : Parts extracted from the component side. • C : panel designation.
• : Pattern from the side which enables seeing. • Signal path
(The other layers' patterns are not indicated.) F : AUDIO

1-1. PRINTED WIRING BOARD – SPK LED Board – (Left/Right) • : Uses unleaded solder.

1 2 3 4 5 6 7 8

A SPK LED BOARD SPK LED BOARD

(COMPONENT SIDE) SHAKE7
(CONDUCTOR SIDE)
D2700, D2701
BA BK
GA GK
D2700

RA RK
JR2702 JR2703
JR2701

JR
JR

B
D2701

JR

SHAKE7
RA RK
JL2701
JL2702
JL2700
JL2703 GA GK

BA BK
1 4

C 11
CN2700
11 (11)
(11) 1-888-253-
LED SPEAKER 1-888-253-
L/R

1-2. SCHEMATIC DIAGRAM – SPK LED Board – (Left/Right)

1 2 3 4

A SPK LED BOARD

CN2700
4P
JL2700
1 M+5V
JL2701
2 RED_LED LED SPEAKER
R JL2702
3 BLUE_LED L/R
JL2703
4 GREEN_LED
G
B
B

D2700
SMLVN6RGB1U17QYB
SHAKE7

C G

D2701
SMLVN6RGB1U17QYB

2
 SS-SHAKE5/SHAKE7/SHAKE6D
SECTION 2 Ver. 1.2
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they • Abbreviation
may have some difference from the original one. AR : Argentina model
• Items marked “*” are not stocked since they are AUS : Australian model
seldom required for routine service. E2 : 120 V AC area in E model
Some delay should be anticipated when ordering E4 : African model
these items. E51 : Chiliean and Peruvian models
EA : Saudi Arabia model
MX : Mexican model
MY : Malaysia model
RU : Russian model
SAF : South African model
TH : Thai model
2-1. SS-SHAKE7
1 5
10

1 6
2
2
3
9

6 1

2
1
2
1 A
2 B
1

4 2

6 A
7 8 B not supplied

2 2
1
6 not supplied
1
#1 4
12 13
not supplied 14
11
(SPK LED
board)

Note: This diagram is for L channel speaker.

The mechanical position of R channel is reversed.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 4-874-614-12 SCREW (1) (3.5X14), TAPPING 8 1-826-143-11 LOUDSPEAKER (2.5CM)
2 4-449-911-01 PROTECTOR, CORNER
3 A-1913-509-A CABINET (L) ASSY, SPEAKER 9 1-858-853-11 LOUDSPEAKER (20CM)
3 A-1913-510-A CABINET (R) ASSY, SPEAKER 10 1-858-855-11 LOUDSPEAKER (10CM)
4 2-655-031-01 FOOT 11 A-1913-511-A PANEL (SW) ASSY, FRONT
12 4-238-407-02 SCREW (1) (4X20), +BV TAPPING
5 4-477-832-01 SARANET, CUSHION 13 1-858-854-11 LOUDSPEAKER (38CM)
6 4-874-614-02 SCREW (1) (3.5X14), TAPPING
7 A-1913-507-A PANEL (L) ASSY, FRONT 14 1-846-602-12 CONNECTION CABLE WITH SPEAKER
7 A-1913-508-A PANEL (R) ASSY, FRONT #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S
3
SS-SHAKE5/SHAKE7/SHAKE6D
Ver. 1.2

2-2. SS-SHAKE5/SHAKE6D

52 51
53
59

58

52

55
57

not supplied

not 62
56 supplied
61 52
54 51
#1
52

58 54

not supplied
(SPK LED board)

60
54

54

Note: This diagram is for L channel speaker.

The mechanical position of R channel is reversed.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 4-874-614-12 SCREW (1) (3.5X14), TAPPING 56 A-1939-752-B PANEL (R) ASSY, FRONT
52 4-462-486-01 PROTECTOR, CORNER
53 A-1939-755-A CABINET (R) ASSY, SPEAKER (EXCEPT US) 57 1-826-143-11 LOUDSPEAKER (2.5CM)
53 A-1939-756-A CABINET (L) ASSY, SPEAKER (EXCEPT US) 58 4-229-966-12 SCREW (4X16), +BV TAPPING
53 A-1940-877-A CABINET (R) ASSY, SPEAKER (US) 59 1-858-902-11 LOUDSPEAKER (20CM)
60 A-1939-754-A PANEL (SW) ASSY, FRONT
53 A-1940-878-A CABINET (L) ASSY, SPEAKER (US) 61 1-858-903-11 LOUDSPEAKER (35CM)
54 2-655-031-01 FOOT
55 4-874-614-02 SCREW (1) (3.5X14), TAPPING 62 1-846-686-11 CORD WITH CONNECTOR
56 A-1939-753-B PANEL (L) ASSY, FRONT #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S

4
 SS-SHAKE5/SHAKE7/SHAKE6D
SECTION 3 Ver. 1.1
SPK LED
ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in • SEMICONDUCTORS • Abbreviation
the parts list may be different from the In each case, u: μ, for example: AR : Argentina model
parts specified in the diagrams or the uA. . : μA. . , uPA. . , μPA. . , AUS : Australian model
components used on the set. uPB. . : μPB. . , uPC. . , μPC. . , E2 : 120 V AC area in E model
• -XX and -X mean standardized parts, so uPD. . : μPD. . E4 : African model
they may have some difference from the • CAPACITORS E51 : Chiliean and Peruvian models
original one. uF: μF EA : Saudi Arabia model
• RESISTORS • COILS MX : Mexican model
All resistors are in ohms. uH: μH MY : Malaysia model
METAL: Metal-film resistor. RU : Russian model
METAL OXIDE: Metal oxide-film resistor. The components identified by mark 0 SAF : South African model
F: nonflammable or dotted line with mark 0 are critical for TH : Thai model
• Items marked “*” are not stocked since safety.
they are seldom required for routine ser- Replace only with part number specified.
vice.
Some delay should be anticipated when When indicating parts by reference num-
ordering these items.
ber, please include the board name.

Ref. No. Part No. Description Remark

SPK LED BOARD
*************

< CONNECTOR >

CN2700 1-580-057-11 PIN, CONNECTOR (SMD) 4P (LED SPEAKER L/R)

< DIODE >

D2700 6-503-944-51 DI SMLVN6RGB1U17QYB

D2701 6-503-944-51 DI SMLVN6RGB1U17QYB (SHAKE7)

< JUMPER RESISTOR >

JR2701 1-216-864-11 SHORT CHIP 0

JR2702 1-216-864-11 SHORT CHIP 0
JR2703 1-216-805-11 METAL CHIP 47 5% 1/10W
(SHAKE5/SHAKE6D)
JR2703 1-216-864-11 SHORT CHIP 0 (SHAKE7)

5
SS-SHAKE5/SHAKE7/SHAKE6D

REVISION HISTORY

Checking the version allows you to jump to the revised page.

Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver. Date Description of Revision
1.0 2013.04 New
1.1 2013.08 Add SARANET, CUSHION on page 3.
Add P/N and description for SCREW (4X16), +BV TAPPING in page 4.
Delete P/N and description for SCREW (1) (4X20), +BV TAPPING in page 4.
Addition of Argentina model.
1.2 2014.01 Change P/N of Ref. No. 13 in page 3.
Change P/N of Ref. No. 61 in page 4.