Scribd
Upload
89 views

Assignment 1: Design For Manufacture

The document provides instructions for an assignment to model milled and turned parts in Solidworks, then modify the parts to conform with design for manufacture rules. It details submission requirements, evaluation criteria, notes on assistance and plagiarism, and penalties for late or incorrectly submitted assignments.

Uploaded by

Chirag Sood
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
89 views

Assignment 1: Design For Manufacture

The document provides instructions for an assignment to model milled and turned parts in Solidworks, then modify the parts to conform with design for manufacture rules. It details submission requirements, evaluation criteria, notes on assistance and plagiarism, and penalties for late or incorrectly submitted assignments.

Uploaded by

Chirag Sood
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment 1: Design for Manufacture

10% of Final Mark

Due: Monday Feb. 11th at 9:00am

Submission Filenames: FirstInitial_LastName_STUDENTID_DFM_MILLED_INIT.sldprt


FirstInitial_LastName_STUDENTID_DFM_MILLED_DFM.sldprt
FirstInitial_LastName_STUDENTID_DFM_TURNED_ INIT.sldprt
FirstInitial_LastName_STUDENTID_DFM_TURNED_DFM.sldprt
Submit To: MyCourses -> Assignments -> DFM Assignment

Using the provided drawings model the milled and turned parts in Solidworks. Then, modify the
parts to conform with the DFM rules you learned in class. The following rubric will be used to
evaluate your model.

Criteria Points (20 Total)


Fully Constrained Sketches 3
Correct Dimensions ( _INIT.sldprt files only) 1
Extruded Base Feature (1 minimum) 1
Extruded Cut Feature (1 minimum) 1
Revolved Base Feature (1 minimum) 1
Revolved Cut Feature (1 minimum) 1
Hole Wizard Feature (1 Minimum) 1
DFM Errors (-1 per error) 10
Model Robustness (use of Through All, Convert Entities, 1%
descriptive naming of features, etc. where appropriate)

Note: There are many ways to do this assignment “correctly.” Experiment and be creative.

No assistance will be given in modelling this part, but questions regarding drawing interpretation
may be answered.

You may discuss the assignment, but submissions are individual. If students are found to
plagiarize, they will receive a 0% on their assignment and held accountable to appropriate
McGill policies.

Late submissions will be penalized 2 points per day, and will not be accepted 3 days after due.

Incorrectly submitted or named assignments will be penalized 2 points or treated as “late” if not
enough information is provided to identify the assignment.

© Sanesh Iyer 2018


Drawing is Not To Scale (NTS). All Dimensions are in inches.

© Sanesh Iyer 2018


Drawing is Not To Scale (NTS). All Dimensions are in inches.

© Sanesh Iyer 2018

You might also like