Scribd
Upload
348 views

Relocation Failure in Target CN RNC or Target System PDF

1) An inter-RAT CS handover failure occurred when attempting to handover a call from a 3G WCDMA network to a 2G GSM network. 2) Signaling traces revealed the cause was a "relocation-failure-in-target-CN-RNC-or-target-system" error. 3) The issue was determined to be that the 2G MSC did not have the AMR codec activated for the 2G BSC, so it responded with a "no radio resource" failure during the handover attempt. Activating the AMR codec on the 2G MSC resolved the problem.

Uploaded by

Anonymous g8YR8b9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
348 views

Relocation Failure in Target CN RNC or Target System PDF

1) An inter-RAT CS handover failure occurred when attempting to handover a call from a 3G WCDMA network to a 2G GSM network. 2) Signaling traces revealed the cause was a "relocation-failure-in-target-CN-RNC-or-target-system" error. 3) The issue was determined to be that the 2G MSC did not have the AMR codec activated for the 2G BSC, so it responded with a "no radio resource" failure during the handover attempt. Activating the AMR codec on the 2G MSC resolved the problem.

Uploaded by

Anonymous g8YR8b9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

͑ ΅ΙΖ͑ʹΒΤΖΤ͑ͲΓΠΦΥ͑Έʹ͵;Ͳ͑΃Ϳ΁͗΃Ϳ΀͑ 芉᪌芴㑻˖͑͑

Case 8: Inter-RAT CS Handover Failure from W CDMA(3G) to GSM(2G) caused by AMR


Activation Codec Issue of Ericsson 2G MSC Server
Inter-RAT CS Handover Failure from W CDMA(3G) to GSM(2G)caused by AMR
Title
Activation Codec Issue of Ericsson 2G MSC Server

Product Family W CDMA-RAN Product W CDMA-RNC

Afterthe Successful Iu_CS integration ofHuawei RNC V1.8 (BSC6800V100R008C01B082)


to E-venderCore-Networkfora particulartelecommsoperator,there was a failure in the Int
Phenomenon
er-RAT CS handovertest from 3G(W CDMA)to 2G(GSM).The UTRAN was Huawei,the 3G
Description
MGW & MSC ServerwasE-Vender,the 2G MSC wasE-Vender,while the 2G BSC was Hu
awei.
Alarm
None
Information
Cause During the CDT signaling trace,"relocation-failure-in-target-CN-RNC-or-target-system"caus
Analysis esRANAP_RELOCATION_PREPARATION_FAILURE.
(1.)Start the CDT Signaling trace.
(2.)RNC sends a RANAP_RELOCATION_REQUIRED signaling message to CN.Here Sou
rce ID and Target ID are correct.
(3.)CN replied with a RANAP_RELOCATION_PREPARATION_FAILURE.
(4.)Checked thisRANAP_RELOCATION_PREPARATION_FAILURE
signaling message from CN,the cause forthe failure wasfound to be a "relocation-failure-in
-target-CN-RNC-or-target-system".
(5.)Mobilized forresourcesto trace the 4 NE signaling message exchange and analyze the
trace in the Source and target system.
(6.)Signaling traced on E-Vender
2G MSC showed that it Seemsat HO to 2G,the 2G network doesnot know the service clas
softhe Multi RAT mobile assuch it wantsto maintain the current 3G speech version (AMR)
Handling
Process
which it doesnot have assuch it responded back with no radio resource.
i.e:"no radio resource message"
(7.)The License on the GBSC (Huawei 2G BSC)wasdisplayed and can support 3G Capaili
tiesasfollows:So the license isok.
SUPPORT INTER-RAT HandOver:Yes
CONFIGURED INTER-RAT HandOver:Yes
(8.)The GSM cell parameters on the 2G BSC waschecked and found to be consistent with
that on the 2G MSC,3G MSC and RNC.
(9.)But when we checked on the 2G msc the definition ofAMR to the BSC ...it was not defi
ned forthat BSC.
(10.)W hen we activated AMR on the 2G MSC,the BSC HO is working...it meansthe BSC i
s alreadyactive forAMR.
Suggestions AM R activat
ionshoul
dbeenabledi
nthet
argetsystem duringInt
er-RAT CSHandove
and Summary rTestbetweenHuawei2G BSC andE-Vender2G M SC.

2008-8-18 ConfidentialInformationofHuawei 11

You might also like