Scribd
Upload
25 views

Q7C3 LCD Monitor Service Guide Circuit Operation Theory

The document provides an overview of the circuit operation and components in a Q7C3 LCD monitor. The scaling IC converts analog RGB signals to digital data using an A/D converter and outputs the digital signals to the LCD panel driver IC. It also handles OSD functions and input timing detection. An EEPROM stores OSD and monitor setting data, while a flash ROM stores the MCU program. A DDC IC supports the DDC2B standard to allow the monitor specifications to be read by the PC. The main PW133A IC incorporates the scaling, OSD, A/D conversion and MCU functions.

Uploaded by

bipindimri2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Q7C3 LCD Monitor Service Guide Circuit Operation Theory

The document provides an overview of the circuit operation and components in a Q7C3 LCD monitor. The scaling IC converts analog RGB signals to digital data using an A/D converter and outputs the digital signals to the LCD panel driver IC. It also handles OSD functions and input timing detection. An EEPROM stores OSD and monitor setting data, while a flash ROM stores the MCU program. A DDC IC supports the DDC2B standard to allow the monitor specifications to be read by the PC. The main PW133A IC incorporates the scaling, OSD, A/D conversion and MCU functions.

Uploaded by

bipindimri2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Q7C3 LCD Monitor Service Guide

Circuit Operation Theory

(a) Circuit operation theory:


A basic operation theory for this interface board is to convert analog signals of Red, Green,
Blue. The scaling IC has internal A/D converter, internal OSD and auto detect input timing
functions. A/D converter is convert analog signal to digital data. OSD is offering adjustable
functions to end-user. Detect timing is for detect change mode. Scalar finally output the digital
RGB data, the Hsync, Vsync and pixel clock to LCD panel driver IC by RSDS interface. MCU also
embedded in PW133A controls system processing. EEPROM is stored DDC data, OSD common
data and user mode data. Flash-Rom is stored the source code which is accessed by MCU to run
program.

(b) IC introduction:
1.) DDC (Display Data Channel) function: We use DDC IC to support DDC/2B function. DDC data
is stored in 24C02(EEPROM). Those data related to LCD monitor specification. PC can read
them by “SDA” and “SCL” serial communication for I²C communication for DDC2B.
2.) PW133A IC : There are A/D, Scaling, OSD, MCU functions in the PW133A IC. Scaling IC is
revolutionary scaling engine, capable of expanding any source resolution to a highly uniform
and sharp image, combined with the critically proven integrated 8 bit triple-ADC and patented
Rapid-lock digital clock recovery system. It also support detect mode and DPMS control. MCU

You might also like