Scribd
Upload
61 views4 pages

24.scope Location 1 CC-2833

This document is a calibration certificate from E Quality Measurement Services laboratory in Chennai, India. It lists 24 mechanical measurement instruments that the laboratory can calibrate, including calipers, micrometers, gauges, and other dimensional measurement tools. For each instrument, it provides the measurement range, calibration capability, and calibration method. The certificate confirms that the laboratory's calibration system complies with ISO/IEC 17025 standards and is valid until September 2020.

Uploaded by

Ravichandran D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
61 views4 pages

24.scope Location 1 CC-2833

This document is a calibration certificate from E Quality Measurement Services laboratory in Chennai, India. It lists 24 mechanical measurement instruments that the laboratory can calibrate, including calipers, micrometers, gauges, and other dimensional measurement tools. For each instrument, it provides the measurement range, calibration capability, and calibration method. The certificate confirms that the laboratory's calibration system complies with ISO/IEC 17025 standards and is valid until September 2020.

Uploaded by

Ravichandran D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Laboratory E Quality Measurement Services, No.

3/3, Mogappair West, Chennai,


Tamil Nadu

Accreditation Standard ISO/IEC 17025: 2005


Certificate Number CC-2833 Page 1 of 4
Validity 26.09.2018 o 25.09.2020 Last Amended on -
Quantity Measured / Range/Frequency *Calibration Measurement Remarks
Instrument Capability (±)

MECHANICAL CALIBRATION

I. DIMENSION (BASIC MEASURING INSTRUMENT, GAUGE ETC.)

1. Calipers $
L.C.: 0.01 mm 0 to 300 mm 11.0 m Using Caliper Checker
0 to 1000 mm 18.0 m & Gauge Blocks

2. External Micrometer$
L.C.: 0.001 mm 0 to 25 mm 1.2 m Using Gauge Blocks
L.C.: 0.01 mm 0 to 1000 mm 20.3 m & Long slip gauge

3. Plunger Dial Gauge$


L.C.: 0.01mm 0 to 25 mm 3.0 m Using Dial Calibration
Tester

4. Lever Type Dial


Gauge$
L.C.: 0.01 mm 0 to 1 mm 3.0 m Using Dial Calibration
Tester

5. Bore Gauge$
(Only Transmission
error)
L.C.: 0.001 mm 1.2 mm 6.2 m Using Dial Calibration
Tester

6. Height Gauges /
Electronic Height
Gauge$
L.C.: 0.001 mm 0 to 1000 mm 13.2 m Using Caliper Checker,
Long Slip & Gauge
Blocks

Shally Sharma Anuja Anand


Convenor Program Manager
Laboratory E Quality Measurement Services, No. 3/3, Mogappair West, Chennai,
Tamil Nadu

Accreditation Standard ISO/IEC 17025: 2005


Certificate Number CC-2833 Page 2 of 4
Validity 26.09.2018 o 25.09.2020 Last Amended on -
Quantity Measured / Range/Frequency *Calibration Measurement Remarks
Instrument Capability (±)

7. Depth Micrometer$
L.C.: 0.01 mm 0 to 150 mm 7.0 m Using Gauge Blocks

8. Depth Gauges$
L.C.: 0.01 mm 0 to 300 mm 19.0 m Using Gauge Blocks

9. Micrometer Setting 25 mm to 600 mm 7.6 m Using Gauge Blocks,


Standard / Length Electronic Probe
Bars$

10. Feeler Gauge/ Width 0.04 mm to 2 mm 3.5 m Using Digital


Gauge$ Micrometer

11. Internal Micrometer$


L.C.: 0.01 mm 50 mm to 1000 mm 14.7 m Using Gauge Blocks

12. Cylindrical Setting 0 to 100 mm 3.8 m Using Gauge Blocks &


Master$ Electronic Probe,
Size: 100 mm Runout FCDMM, Lever Dial

13. Plain Plug Gauge$ 1.5 mm to 75 mm 4.1 m Using Gauge Blocks,


Electronic Probe &
Long Slip Gauge

14. Snap Gauge$ 2.5 mm to 350 mm 5.3 m Using Gauge Blocks,


Long Slip Gauge &
Comparator

15. Dial Calibration


Tester/Micrometer
Head$
L.C.: 0.0002 mm 0 to 25 mm 1.3 m Using Gauge Blocks &
Electronic Probe

Shally Sharma Anuja Anand


Convenor Program Manager
Laboratory E Quality Measurement Services, No. 3/3, Mogappair West, Chennai,
Tamil Nadu

Accreditation Standard ISO/IEC 17025: 2005


Certificate Number CC-2833 Page 3 of 4
Validity 26.09.2018 o 25.09.2020 Last Amended on -
Quantity Measured / Range/Frequency *Calibration Measurement Remarks
Instrument Capability (±)

16. Thread Plug Gauge / 2.5 mm to 100 mm 7.8 m Using FCDMM, TMW,
Wear Check Plug Cylindrical Setting
Gauge$ Master
17. Electronic Probe/
LVDT with Probe$
L.C.: 0.0001 mm 0 to 25 mm 1.8 m Using Gauge Blocks &
Comparator

18. Thread Measuring 0.17 mm to 20 mm 2.4 m Using Gauge Blocks &


Wire / Three Wire Set / Electronic Probe
Measuring Pin$

19. Dial Caliper Gauge$


L.C.: 0.01 mm 0 to 100mm 7.3 m Using Gauge Blocks

20. Test Foils$ 0.009 mm to 2 mm 3.1 m Using Electronic Probe

21. Bevel Protractor/


Combination Set/
Digital Protector$
L.C.: 5’ Up to 180° 3.3 Arc min. Using Angle Gauge

22. Coating Thickness 0 to 1.5 mm 2.3 m Using Foils


Gauge$

23. Dial Snap Gauge$ 0 to 50 mm 1.7 Using Gauge blocks


(Parallelism)

24. V Block$ 100 mm X 70 mm Using Gauge Blocks,


Parallelism 3.8 m Lever Dial Gauge &
Symmetry 3.5 m Surface Plate
Flatness 5.2 m
* Measurement Capability is expressed as an uncertainty () at a confidence probability of 95%
$
Only in Permanent Laboratory

Shally Sharma Anuja Anand


Convenor Program Manager
Laboratory E Quality Measurement Services, No. 3/3, Mogappair West, Chennai,
Tamil Nadu

Accreditation Standard ISO/IEC 17025: 2005


Certificate Number CC-2833 Page 4 of 4
Validity 26.09.2018 o 25.09.2020 Last Amended on -
Quantity Measured / Range/Frequency *Calibration Measurement Remarks
Instrument Capability (±)

Shally Sharma Anuja Anand


Convenor Program Manager

You might also like