Pneumatic

Type GTD/GTE
Twin piston actuator
Standard version Picture:
Pneumatic twin piston actuator
System design: type GTD = double-acting
type GTE = single-acting (spring return)

Construction Rack-and-pinion technique with self-centering

Installation position: Random

Interface actuator/valve:
Standards:
Four or eight female threads in the casing
Special feature optional:
- 3 position actuators with two extra
acc. to DIN EN ISO 5211
pistons
Interface actuator/control valve:
- alternative fastening and fitting
Acc. to NAMUR or VDI/VDE 3845
dimensions
Interface actuator/signal units:
- shaft with inner double-D
Acc. to VDI/VDE 3845 (NAMUR)
- surface treated with epoxy resin
Materials: Casing: anodized aluminium alloy
- chemical version on demand
Caps: aluminium alloy epoxy coated, type GTD/GTE-048 :
plastics, epoxy lacquered - shaft stainless steel
Piston/ aluminium alloy, toothed rack: aluminium alloy,
- gaskets FKM (Viton)
type GTD/GTE-048 + 058: plastics
- temperature –40 to +160°C
Shaft: steel, hard nickel plated
- alternative pivoting angles (e. g.
Gaskets: NBR (buna N) 135°)
Bearings: easy sliding plastics - limit adjustment for both pivoting
directions, type BE
Ambient temperature - 20 bis + 95°C
- 3 position actuators: 0 °-90°-180°,
Nominal pivoting angle Double-acting: 90°, 120°, 180°, 240° 0°-120°-240°
Single-acting: 90°
Adjustable nominal pivoting angle from + 5 to – 5 ° - 3 position actuators with spring-
GTD/GTE-048 not adjustable centered central position
Torques 3 to 8000 Nm - 1 to 16 bar upon request
Control pressure 2 to 10 bar
- can be operated with other non-
aggressive, gaseous or fluid
Control medium/ Filtered air; minimum requirements of DIN ISO 8573-1/ media upon request
quality class 4 apply for residual oil, dust and water content
 actuator dimensions
Type of A1 A2 A3 B CH11xdepth Dxdepth E F Gxdepth ØH K L M N ØR S SWH11 TH9 U V Z
actuator

GTD / GTE-048 117 —- —- 46 9x12 M 6x9 95 10 M 5x8 12 80 36 42 16 12 10 9 23,8 2 61 12,1

GTD / GTE-058 134 150 194 50 11x19 M 6x9 104 18 M 5x8 14 80 36 50 16 12 10 14 23,8 2 68 14,1

GTD / GTE-068 138 154 188 60 11x19 M 8x12 118 18 M 6x9 14 80 50 70 16 12 10 14 25,3 2 79 14,1

GTD / GTE-078 161 182 235 65 11x19 M 8x12 130 19 M 6x9 14 80 50 70 16 18 10 17 29,3 2 92 14,1

GTD / GTE-088 180 204 268 67 14x25 M 8x12 138 19 M 6x9 14 80 50 70 16 18 10 17 32,3 2 100 18,1

GTD / GTE-098 204 236 310 70 17x30 M 8x12 147 19 M 6x9 19,5 80 50 70 16 25 14 17 37,3 2 110 22,2

GTD / GTE-110 222 252 323 90 17x30 M 10x15 170 25 M 8x12 19,5 80 70 102 16 25 14 22 40,3 2,5 ..—- 22,2

GTD / GTE-115 292 —- 426 90 17x30 M 10x15 170 25 M 8x12 28 80 70 102 16 40 20 22 53,3 2,5 —- 22,2

GTD / GTE-127 298 348 448 103 22x39 M 10x15 190 25 M 8x12 28 80 70 102 16 40 20 22 53,3 3 —- 28,2

GTD / GTE-143 337 —- —- 110 22x39 M 12x18 228 27 M 10x15 28 130 102 125 16 40 20 27 53,3 3 —- 28,2

GTD / GTE-163 377 439 565 110 27x48 M 12x18 228 27 M 10x15 36 130 102 125 11 45 28 27 66,3 3 —- 36,2

GTD / GTE-185 420 —- —- 135 27x48 —- 285 40 M 16x24 36 130 140 —- 11 45 28 36 66,3 4 —- 36,2

GTD / GTE-210 462 538 690 135 36x64 —- 285 40 M 16x24 40 130 140 —- 11 60 32 36 79,3 4 —- 48,2

GTD / GTE-250 603 705 905 160 46x82 —- 332 50 M 20x28 40 130 165 —- 11 60 32 46 105,3 4 —- 60,2

GTD / GTE-254 683 809 —- 160 46x82 —- 332 50 M 20x28 40 130 165 —- 11 60 32 46 134 4 —- 60,2
Version 06/2010

GTD / GTE-300 683 —- —- 160 —- —- 420 62 M 16x24 40 130 254 —- 11 74 32 55 134 5 —- —-

bar GmbH Tel. +49 (0) 26 44 - 96 07 - 0 Email: [email protected]