SHEET

Sikacrete®-215 F
MORTAR FOR PASSIVE PROTECTION AGAINST FIRE OF
HIGH WORKABILITY

PRODUCT DESCRIPTION ▪ Variable application thickness depending on the

Mass and shape of the element to be protected.
Sikacrete®-215 F is a dry mortar Nal or projectable,
▪ Due to its low density final structure, the
formulated with calcium sulphate Light aggregates Acoustic and thermal behavior of the Cies.
and various chemical additives that their mechanical
application when it is kneaded with Water and ▪ The projected mortar surfaces can be Rails
optimize the physico-chemical characteristics of ▪ It contains aggregates of highly re- To the heat
Product set and hardened on the support. Sikacrete®- of the fires caused by hi- Drocarbides.
215 F is fiber free and does not contain harmful
substances.
CERTIFICATES / STANDARDS
APPLICATIONS ▪ Classification reaction to fire (Euroclass): A1 (In-
gas) ▪ Complies with UNE EN 13381: 2005.
▪ Protection of metal structures. "Methods of en- To determine the contribution
to resistance To the fire of structural elements ";
▪ Protection of reinforced concrete. In the following Parties: Part 3: "Protection
applied to elements Concrete "Part 4:"
▪ Protection of structures with sheet steel, sheet Protections applied to "Part 5:" Protection
metal Collaborator, etc. applied to Mixed concrete / sheet steel gives"
▪ In residential, non-residential, industrial and civil ▪ Certification Idiem, Report N ° 877.410, "Mortar
Engineering Projected Sikacrete®-215F (Copsafire) "

CHARACTERISTICS / ADVANTAGES
▪ Pre-dosed dry mortar with easy application, both by
mechanical means such as manuals.
▪ Slightly aggressive with the shirts and shafts of the
machine- Projection

PRODUCT INFORMATION
Chemical Base Gypsum mortar with phyllosilicate type aggregates
Presentation
▪ 15 kg bags
▪ Pallet with 60 bags of 15 kg
▪ Big Bag 800 Kg (on request)
Appearance / Color Beige powder
Conservation 6 months
Storage conditions 6 months from the date of manufacture, in their original containers well.
In a cool, dry place.

1/3
Density ▪ Powder: approx. 0.69 kg / l
▪ Fresh mortar: approx. 1.37 kg / l
▪ Hardened mortar: approx. 0.96 kg / l

TECHNICAL
INFORMATION
Resistance to Compression ~ 1,8 N/mm2 (NCh 158.Of96)

Flexural Strength ~ 1,5 N/mm2 (NCh 158.Of96)

Electrical resistivity ~ 0,093 W/K m

APPLICATION INFORMATION
Mix Ratio 60% water by weight
Consumption ~ 9.3 kg / m 2 for a thickness of 10 mm
Layer Thickness It will depend on the massiveness of the element and the time of
resistance to the Go is required.
Massivity Thickness Thickness Thickness Thickness for
for for for
[m-1] F 30 (mm) F 60 (mm) F 90 (mm) F 120 (mm)
100 12 19 27 33
120 12 19 27 34
140 13 20 28 35
160 13 20 28 35
180 13 20 29 36
200 13 21 29 36
220 14 21 30 37
240 14 22 30 38
260 14 22 31 38
280 15 22 31 39
300 15 23 31 39
320 15 23 32 40
340 15 24 32 41

Room temperature Min. +5 °C / max. +35 °C

Bracket Temperature Min. +5 °C / max. +35 °C

APPLICATION INSTRUCTIONS APPLICATION

PREPARING THE SUPPORT Sikacrete®-215 F is mechanically kneaded with water and can be
applied manually or by machine Projection of mortars as pump worm
The surface of the structural metal element to pro- screw wet track, rotor, and piston pump. Etc. Reinforcement: In order
Teger must be clean, dry, free of dust and grease and to avoid falling mortar, it is recom- Reinforce with wire mesh the
de- Protected by the application of Corrosion areas where already a high layer thickness, there are Risks of
protection. In normal circumstances it is not vibration or possibility of mechanical damage
necessary to place Mesh or any other type of Auxiliary
support. As it is a mechanical application of the CLEANING TOOLS
finished product presents a ru- Can be smoothed and All equipment and tools must be cleaned.
plastered manually. While the mortar remains cool. Application with water immediately after use.
MIXED LIMITATIONS
Sikacrete®-215 F should be mixed with 9 liters of
water For a 15 kg bag. Use mechanical mixers for ▪ Due to its high power of water retention (98%),
mortar or Gón or drill of low revolutions. Releases water vapor upon heating.
▪ Sikacrete®-215 F is not suitable for so- Stuck to
constant moisture
▪ Product not suitable for underground applications.
LEGAL NOTES
▪ No coating is required. To avoid frictional wear. If
▪ The information, and in particular the
you want to get an aesthetic effect, with paints, they recommendations Related to the application and
must comply with the is required by the mortar. final use of Sika, are given in good faith based on
the knowledge and Sika's current experience of
▪ Note: It should be borne in mind that due to the ru-
products when Have stored properly, handled
Mortar can be provided by the application of Paint and applied Under normal conditions in
can be partial. HE Recommends performing a previous accordance with The recommendations of Sika.
test. Protection of metal structures. In practice, the differ- Materials, substrates and
real conditions of the site are such that no
NOTES guarantee in relation to the Marketing or fitness
for a particular purpose. Or any obligation arising
All the technical data of the product indicated in the at all from any legal relationship, can be inferred
data sheet is based on laboratory tests. Actual from this in- Training, or any other written
measured data may vary due to cir- Beyond our recommendation, Or any other suggestions
control. offered. The user de- Be tested for the suitability
of the product for Purpose. Sika reserves the
LOCAL RESTRICTIONS right to Change the properties of their products.
Please note that as a result of The specific operation They must ob- Property rights of third parties. All
of this project. May vary from country to country. purchase orders are accepted subject to our
Please consult the local product data sheet for the current conditions of sale and delivery. The Users
of the fields of application. should always refer to the most recent edi- Tion
of the relevant local Product Data Sheet, Which
ECOLOGY, SAFETY AND HYGIENE will be provided at your request.

For information and advice on safety in the

Nipulation, storage and disposal of Users should
refer to the Current security, which contains
physical, ecological and Toxicological and other data
relating to Dad. In case of an emergency, call CITUC
to the Telephone calls: 56-226353800 for
intoxications or 56- 222473600 for chemical
emergencies

3/3