High Pressure filters

FHP series
Maximum pressure up to 420 bar - Flow rate up to 750 l/min

445 High Pressure filters

FILTER SIZING Corrective factor
The correct filter sizing have to be based on the variable pressure drop Corrective factor Y, to be used for the filter element pressure drop calculation.
The values depend to the filter size and lenght and to the filter media.
depending by the application. For example, for the return filter the
pressure drop have to be in the range 0.4 - 0.6 bar. Reference viscosity 30 mm2/s

The pressure drop calculation is performed by adding together the Return filters
value of the housing with the value of the filter element. The pressure Filter Absolute filtration Nominal filtration
drop in the housing is proportional to the fluid density (kg/dm3); all element H Series N Series
the graphs in the catalogue are referred to mineral oil with density of Type A03 A06 A10 A16 A25 P10 P25 M25
0.86 kg/dm3. M60 M90
1 74.00 50.08 20.00 16.00 9.00 6.43 5.51 4.40
The filter element pressure drop is proportional to its viscosity (mm2/s),
MF 020 2 29.20 24.12 8.00 7.22 5.00 3.33 2.85 2.00
the corrective factor Y is related to an oil viscosity different than 30
3 22.00 19.00 6.56 5.33 4.33 1.68 1.44 1.30
mm2/s.
MF 030
MFX 030 1 74.00 50.08 20.00 16.00 9.00 6.43 5.51 3.40
Sizing data for single cartridge, head at top
∆pc = Filter housing pressure drop [bar]
1 28.20 24.40 8.67 8.17 6.88 4.62 3.96 1.25
∆pe = Filter element pressure drop [bar]
MF 100 2 17.33 12.50 6.86 5.70 4.00 3.05 2.47 1.10
Y = Multiplication factor Y (see correspondent table), MFX 100 3 10.25
depending on the filter element size, on the filter element 9.00 3.65 3.33 2.50 1.63 1.32 0.96
lenght and on the filter media 4 6.10 5.40 2.30 2.20 2.00 1.19 0.96 0.82
Q = flow rate (l/min)
V1 reference viscosity = 30 mm2/s (cSt) MF 180 1 3.67 3.05 1.64 1.56 1.24 1.18 1.06 0.26
V2 = operating viscosity in mm2/s (cSt) MFX 180 2 1.69 1.37 0.68 0.54 0.51 0.43 0.39 0.12
∆pe = Y : 1000 x Q x (V2/V1)
∆p Tot. = ∆pc + ∆pe MF 190
MFX 190 2 1.69 1.37 0.60 0.49 0.44 0.35 0.31 0.11

Calculation examples with HLP Mineral oil Variation in viscosity

1 3.20 2.75 1.39 1.33 1.06 0.96 0.87 0.22
Application data: MF 400
MFX 400 2 2.00 1.87 0.88 0.85 0.55 0.49 0.45 0.13
Top tank return filter
3 1.90 1.60 0.63 0.51 0.49 0.39 0.35 0.11
Filter with in-line connections
Pressure Pmax = 10 bar MF 750
Flow rate Q = 120 l/min MFX 750 1 1.08 0.84 0.49 0.36 0.26 0.21 0.19 0.06
Viscosity V2 = 46 mm2/s (cSt)
Oil viscosity = 0.86 kg/dm3
Required filtration efficiency = 25 μm with absolute filtration CU 025 78.00 48.00 28.00 24.00 9.33 9.33 8.51 1.25
With bypass valve and 1 1/4” inlet connection
From the working pressure and the flow rate we understand it should be CU 040 25.88 20.88 10.44 10.00 3.78 3.78 3.30 1.25
possible using the following top tank return filter series: MPT, MPH and FRI. CU 100 15.20 14.53 5.14 4.95 2.00 2.00 0.17 1.10
Let’s proceed with MPT series.
The size 20 doesn’t achieve the required flow rate, therefore we CU 250 3.25 2.55 1.55 1.35 0.71 0.71 0.59 0.25
have to consider the size 100. The final version of size 100 (101, 104,
CU 630 1.96 1.68 0.85 0.72 0.42 0.42 0.36 0.09
110, 120 and 114) will be then defined in function of the mounting
characteristics. CU 850 1.06 0.84 0.42 0.33 0.17 0.17 0.13 0.04

*
∆pc = 0.03 bar ( see graphic below, considering size 100 with the
max available lenght to get the lowest pressure drop)
4.60 2.94 2.52
∆pe = (2.0 : 1000) x 120 x (46/30) = 0.37 bar 1 19.00 17.00 6.90 6.30 1.60
∆p Tot. = 0.03 + 0.37 = 0.4 bar 2 11.70 10.80 4.40 4.30 3.00 2.94 2.52 1.37
MR 100 3 7.80 6.87 3.70 3.10 2.70 2.14 1.84 1.34
The selection is correct because the total pressure drop value is inside 4 5.50 4.97 2.60 2.40 2.18 1.72 1.47 1.34
the admissible range for top tank return filters. It is of course possible 5 4.20 3.84 2.36 2.15 1.90 1.60 1.37 1.34
trying to find a different solution, according to the mounting position
or to other commercial need, repeating the previous steps while using
1 5.35 4.85 2.32 1.92 1.50 1.38 1.20 0.15
a different series or lenght.
3.28 1.44 1.10 1.07 0.96 0.83 0.13
MPT 110 - Length 3 - 4 MR 250 2 4.00
0.40 3 2.60 2.20 1.08 1.00 0.86 0.77 0.64 0.12
4 1.84 1.56 0.68 0.56 0.44 0.37 0.23 0.11
0.30
G 1 1/4”
1 3.10 2.48 1.32 1.14 0.92 0.83 0.73 0.09
Δp bar

0.20 2 2.06 1.92 0.82 0.76 0.38 0.33 0.27 0.08

MR 630 3 1.48 1.30 0.60 0.56 0.26 0.22 0.17 0.08
0.10 4 1.30 1.20 0.48 0.40 0.25 0.21 0.16 0.08
5 0.74 0.65 0.30 0.28 0.13 0.10 0.08 0.04
0
*
0 60 120 180 240 300
Flow rate l/min 1 0.60 0.43 0.34 0.25 0.13 0.12 0.09 0.03
0.37 0.26 0.23 0.21 0.11 0.08 0.07 0.03
Filter housings ∆p pressure drop. MR 850 2
The curves are plotted using mineral oil with density of 0.86 kg/dm3 3 0.27 0.18 0.17 0.17 0.05 0.04 0.04 0.02
in compliance with ISO 3968. ∆p varies proportionally with density. 4 0.23 0.16 0.13 0.12 0.04 0.03 0.03 0.02

Introduction 20
Corrective factor FILTER SIZING
Corrective factor Y, to be used for the filter element pressure drop calculation.
The values depend to the filter size and lenght and to the filter media.
Reference viscosity 30 mm2/s

Suction filters Low & Medium pressure filters

Filter Nominal filtration Filter Absolute filtration Nominal filtration
element N Series element N-W Series N Series
Type P10 P25 Type A03 A06 A10 A16 A25 P10 P25 M25
SF 250 65 21 1 16.25 15.16 8.75 8.14 5.87 2.86 2.65 0.14
10.44 6.11 6.02 4.15 1.60 1.49 0.12
CU 110 2 12.62
3 8.57 7.95 5.07 4.07 2.40 1.24 1.15 0.11
4 5.76 4.05 2.80 2.36 1.14 0.91 0.85 0.05

1 5.30 4.80 2.00 1.66 1.32 0.56 0.43 0.12

Return / Suction filters CU 210 2 3.44 2.95 1.24 1.09 0.70 0.42 0.35 0.09
3 2.40 1.70 0.94 0.84 0.54 0.33 0.23 0.05
Filter Absolute filtration
element
Type A10 A16 A25 016 7.95 7.20 3.00 2.49 1.98 0.84 0.65 0.18
1 5.12 4.33 3.85 DN 025 5.00 4.53 1.89 1.57 1.25 0.53 0.41 0.11
RSX 116 2 2.22 1.87 1.22 040 3.13 2.66 1.12 0.98 0.63 0.38 0.32 0.08

1 2.06 1.75 1.46 2 3.13 2.55 1.46 1.22 0.78 0.75 0.64 0.19
RSX 165 2 1.24 1.05 0.96 1.70 0.94 0.78 0.50 0.40 0.34 0.10
3 0.94 0.86 0.61 CU 400 3 2.15
4 1.60 1.28 0.71 0.61 0.40 0.34 0.27 0.08
5 1.00 0.83 0.47 0.34 0.20 0.24 0.19 0.06
6 0.82 0.58 0.30 0.27 0.17 0.22 0.18 0.05

CU 900 1 0.86 0.63 0.32 0.30 0.21 - - 0.05

2 1.03 0.80 0.59 0.40 0.26 - - 0.05

CU 950 3 0.44 0.40 0.27 0.18 0.15 - - 0.02

MR 630 7 0.88 0.78 0.36 0.34 0.16 0.12 0.96 0.47

21 Introduction
FILTER SIZING Corrective factor
Corrective factor Y, to be used for the filter element pressure drop calculation.
The values depend to the filter size and lenght and to the filter media.
Reference viscosity 30 mm2/s

High pressure filters Stainless steel high pressure filters

Filter Absolute filtration Nominal filtration Filter Absolute filtration
element N - R Series N Series element N Series
Type A03 A06 A10 A16 A25 M25 Type A03 A06 A10 A16 A25
1 332.71 250.07 184.32 152.36 128.36 -
1 332.71 250.07 184.32 152.36 128.36
2 220.28 165.56 74.08 59.13 37.05 -
220.28 165.56 74.08 59.13
HP 011
3 123.24 92.68 41.48 33.08 20.72 - HP 011 2 37.05
3 123.24 92.68 41.48 33.08 20.72
4 77.76 58.52 28.37 22.67 16.17 -
4 77.76 58.52 28.37 22.67 16.17

1 70.66 53.20 25.77 20.57 14.67 4.90

2 70.66 53.20 25.77 20.57 14.67
HP 039 2 36.57 32.28 18.00 13.38 8.00 2.90
HP 039 3 36.57 32.28 18.00 13.38 8.00
3 26.57 23.27 12.46 8.80 5.58 2.20
4 26.57 23.27 12.46 0.88 5.58

1 31.75 30.30 13.16 12.3 7.29 1.60

2 24.25 21.26 11.70 9.09 4.90 1.40 1 31.75 30.30 13.16 12.3 7.29
HP 050 3 17.37 16.25 8.90 7.18 3.63 1.25 2 24.25 21.26 11.70 9.09 4.90
4 12.12 10.75 6.10 5.75 3.08 1.07 HP 050 3 17.37 16.25 8.90 7.18 3.63
5 7.00 6.56 3.60 3.10 2.25 0.80 4 12.12 10.75 6.10 5.75 3.08
5 7.00 6.56 3.60 3.10 2.25

1 58.50 43.46 23.16 19.66 10.71 1.28

HP 065 2 42.60 25.64 16.22 13.88 7.32 1.11 1 20.33 18.80 9.71 8.66 4.78
3 20.50 15.88 8.18 6.81 3.91 0.58 HP 135 2 11.14 10.16 6.60 6.38 2.22
3 6.48 6.33 3.38 3.16 2.14
1 20.33 18.80 9.71 8.66 4.78 2.78
HP 135 2 11.14 10.16 6.60 6.38 2.22 1.11
3 6.48 6.33 3.38 3.16 2.14 1.01 Filter Absolute filtration
element H - U Series
Type A03 A06 A10 A16 A25
1 10.88 9.73 5.02 3.73 2.54 1.04
2 4.40 3.83 1.75 1.48 0.88 0.71 1 424.58 319.74 235.17 194.44 163.78
HP 320
3 2.75 2.11 1.05 0.87 0.77 0.61 281.06 211.25 94.53 75.45
HP 011 2 47.26
4 2.12 1.77 0.98 0.78 0.55 0.47 3 130.14 97.50 43.63 34.82 21.81
4 109.39 82.25 36.79 29.37 18.40

1 4.44 3.67 2.30 2.10 1.65 0.15

2 3.37 2.77 1.78 1.68 1.24 0.10 2 70.66 53.20 25.77 20.57 14.67
HP 500 3 2.22 1.98 1.11 1.09 0.75 0.08 HP 039 3 36.57 32.28 18.00 13.38 8.00
4 1.81 1.33 0.93 0.86 0.68 0.05 4 26.57 23.27 12.46 8.80 5.58
5 1.33 1.15 0.77 0.68 0.48 0.04
1 47.33 34.25 21.50 20.50 14.71
2 29.10 25.95 14.04 10.90 5.88
HP 050 3 20.85 19.50 10.68 8.61 4.36
Filter Absolute filtration Nominal filtration 4 14.55 12.90 7.32 6.90 3.69
element N Series N Series 5 9.86 9.34 6.40 4.80 2.50
Type A03 A06 A10 A16 A25 M25

1 3.65 2.95 2.80 1.80 0.90 0.38 1 29.16 25.33 13.00 12.47 5.92
HF 320 2 2.03 1.73 1.61 1.35 0.85 0.36 HP 135 2 14.28 11.04 7.86 7.60 4.44
3 1.84 1.42 1.32 1.22 0.80 0.35 3 8.96 7.46 4.89 4.16 3.07

Introduction 22
 Selection Software FILTER SIZING
Step 1 Select “FILTERS”

Step 2 Choose filter group (Return Filter, Pressure Filter, etc.)

Step 3 Choose filter type (MPF, MPT, etc.) in function of

the max working pressure and the max flow rate

Step 4 Push “PROCEED”

Step 5
Insert all application data to calculate the filter size following the sequence:
- working pressure
- working flow rate
- working pressure drop
- working temperature
- fluid material and fluid type
- filtration media
- connection type

Step 6
Push “CALCULATE” to have result;
in case of any mistake, the system
will advice which parameter is out
of range to allow to modify/adjust
the selection

Step 7
Download PDF
Datasheet “Report.aspx” pushing the button “Drawing”

23 Introduction
High Pressure filters 444
 High Pressure filters

FHP series
Maximum pressure up to 420 bar - Flow rate up to 750 l/min

445 High Pressure filters

FHP GENERAL INFORMATION

Technical data

High Pressure filters Maximum pressure up to 420 bar - Flow rate up to 750 l/min

Filter housing materials Bypass valve Seals

- Head: Phosphatized cast iron - Opening pressure 600 kPa (6 bar) - Standard NBR series A
- Housing: Phosphatized steel - Other opening pressures on request. - Optional FPM series V
- Bypass valve:
AISI 316L (FHP 010 - 011) Temperature
Brass (FHP 065 - 135 - 320) From -25 °C to +110 °C
Steel (FHP 500)
- Reverse Flow: Steel (FHP 320 - FHP 500) ∆p element type Connections
- Check valve: Steel - Microfibre filter elements - series N: 20 bar FHP 010 - 065 - 135 - 500:
- Microfibre filter elements - series R: 20 bar In-line Inlet/Outlet
Pressure (not available for FHP 010-011 and FHP 500) FHP 011 - 320:
- Working pressure: 42 MPa (420 bar) - Microfibre filter elements - series H: 210 bar 90° Inlet/Outlet
- Test pressure: 63 MPa (630 bar) - Microfibre filter elements - series S: 210 bar
- Burst pressure: 126 MPa (1260 bar) (only for FHP 500) Note
- Pulse pressure fatigue test: 1 000 000 cycles - Wire mesh filter elements - series N: 20 bar FHP filters are provided
with pressure from 0 to 42 MPa (420 bar) - Fluid flow through the filter element from OUT to IN. for vertical mounting

Weights [kg] and volumes [dm3]

Weights [kg] Volumes [dm3]
Lenght 1 2 3 4 5 Lenght 1 2 3 4 5
FHP 010 2.05 2.18 2.64 3.13 - 0.10 0.12 0.15 0.20 -
FHP 065 4.26 4.62 5.83 - - 0.25 0.30 0.50 - -
FHP 135 7.11 8.71 9.76 - - 0.43 0.76 0.97 - -
FHP 320 13.95 16.08 18.37 20.85 - 1.00 1.72 2.49 3.32 -
FHP 500 27.00 31.17 34.69 46.70 52.5 1.71 2.43 3.04 5.18 6.51

Hydraulic symbols
Style S Style B Style T Style D Style V Style Z

High Pressure filters 446

 0.00
FHP 0.00
0 10 010 - 011
20 30 40 50 FHP 065 FHP 320 200
1.50 1.50 0 1.50 100 300 400 500
Flow rate l/min

FHP
FHP 010 Flow rate l/min
Check Valve Check Valve

GENERAL INFORMATION
3/4”
1 1/4”
FHP 010 - 011 1.00 1.00 FHPFHP500 1/2”
1 1/2” 1
1.50 FHP 320 1.50 15 1.00320

Δp bar
1.50

Δp bar

Δp bar
FHP 010 FHP 065 FHP 011 Check Valve
1.50 Check Valve 1 1/2”
1.00 The curves are plotted using mineral oil with density of 0.86
0.50 kg/dm3 in
1.00 Check Valve
compliance with ISO 3968.
1 1/4”
1 1/2”
0.50
1.00 10 0.50 2”
Pressure drop 1
∆p varies proportionally with density.

Δp bar
3/4”
Δp bar

Δp bar
1/2”

Δp bar
Δp bar
FHP 011 1.00
0.00 0.00 0.00

Δp bar
0.50 20 30 40 50 0.50 05
0.50 0 10
025 10050 75
200 100
300 400125 500
Flow rate l/min Flow rateFlow
l/minrate l/min
0.50 Valv
0.00
0.00 0.00 0 Filter housings ∆p pressure drop Byp
0 10 20 30 40 50 0 0 FHP50
150 500 300100 450150 600200 750250
0 100 200 300 400 500 1.50
Flow rate l/min 0.00 Flow rate l/min
FHP 010 - 011 0 FHP
25 065 50 Flow 75rate l/min100 125 FHP 135 Flow rate l/min
Check Valve
3/4”
FHP 010
1.50 - 011 1.50 FHP 320 FHP 320 1.50 FHP 320 1 1/2”
1.50 1.50 Flow rate l/min FHP 320 15
1.50 Valves 15 FHP 500 Check Valve
FHP 320 FHP 010 FHP 500 Check Valve 1.00 1”
1.50
FHP 010 1.50 15 FHP 320 Check Valve Check Valve
3/4”
15 2”
1 1/4” Bypass valve pressure drop

Δp bar
1.00 Check Valve 1/2” 1 1/4” 1.00
1.00 FHP 1.00
065 Check Valve 1 1/2” 1 1/2”
1.50 1.00 1.00 1 1/2” 10 10

Δp bar
Δp barΔp bar

p bar
1 1/4”
Δp bar

10FHP 0.50

Δp bar
3/4”

Δp bar
FHP 011 FHP1011 1/2” 1.50 FHP 1.00 135 010 - 011

p bar
ΔpΔbar
1.00 Check Valve 10 2” 15

ΔpΔbar
3/4”

Δp bar
0.50 0.50 0.50

Δp bar
Δp bar
0.50
1.00 1/2” 0.50Check Valve 1” 5
0.50 5
5 0.00
Δp bar

0.50 1.00 0.50 5 10 0 150 300 450 600 750

FHP 0100.00 - 011 0.00 0.00 FHP 320

Δp bar
FHP 3200.00
Δp bar

1.500.00
0.50 0 Flow rate l/min
0 0
10 1020 2030 30
40 4050 50 1.500.00 0 25 50 75 100 125 15 00 50 100 150 200 250
0 100 200 300 400 500 0 0 050 50 100 150 200 250
0.00
FHP 010 rate l/min
Flow rateFlow l/min 0.50 0.00 00 100 200Valve
Flow
Check 300
rate l/min 400 500
5Valves 0 Flow100 rate l/min150 200 250
50 Flow rate Flow
l/min rate
1 l/min
1/4” 150 Flow300 rate Flow
l/min450rate l/min600 750
0 100 200 300 400 500 0 0 150 50 300 100 450 150 600 200 750 250
1.000.00
Flow rate l/min 1.00 Flow raterate
Flow l/minl/min 1 1/2” 10Bypass valve pressure drop Flow rate l/min
Δp bar

0 25 320 50 75 100 011 125 FHP 500 FHP 500 FHP 500

Δp bar
Δp bar

FHP FHP 0.00 FHPFHP 500

1.50320 0 15 15
1.50 Flow rate l/min 1.50 15 FHP 500100 3/4”250
0.50 FHP 500
065 0
Valves FHP
50 135 150
Check Valve 200
Check Valve 0 FHP6 010 - 011 12 18 24 32
FHP 065
1.50 Check Valve 0.501.50 15 1 1/2” 1 1/2” 5 15 FHP 15 010 - 011 FH
1.50 Bypass valve pressure drop Flow rate l/min Flow rate l/min 4
Check Valve 1 1/4” 1 1/2”
Check Valve 1” 10 10
1.00 Check Valve Check Valve 1 1/2” 1.00 10 1.00 2” 2”

Δp bar
3/4”

Δp barΔp bar
0.00 1/2”3/4”
Δp bar

1.00 10
p bar

3/4”
p bar
Δp bar

FHP 1.00
135 1/2” 0.00 FHP 010 - 011 0 FHP 06510
1.00
0
1.50 10 20 30 40 50 2” 15 15 10 3
bar

Δp bar
100 150 200
bar

0 100 200 300 400 500 05 50

5 250
Δp bar

Flow
CheckrateValvel/min
Δp Δ
Δp bar

Δp Δ

Δp bar
0.50 1” 0.50 5 0.50 Flow rate l/min
Flow rate l/min
0.50 5 5
0.50
1.00 0.50 10 10 5 1
FHP 5000.00 FHP 500 0
15 0

Δp bar
Δp bar
Δp bar

FHP
0.00 320 1.500.00 0 320
FHP
50 1.50 15 0 0
150 150300 300
450 450
600 600
750 750
FHP 0650.00 0 100 200 300 400 500 0.00 00 0 0 50 150
150 300 100 Valve
Check 300
450 150 1450 600 200 600 750 250 750 0
1.500.00
0.50 Check Valve 5 0 0 Flow rate 1/2”
l/min 5 0 Flow rateFlow l/minrate l/min
025 150
2550 Flow
300
50 rate l/min
450
75 1 1/4” 600
100 750
125 50 150 Flow Flow
100 rate
300 rate
l/min l/min
150 450 200 600 250 750
0 0 3 6 6 12 9 18 12 24 15 32 0
0 75 100 125 Flow 10
Check Valve 1.00 Flow raterate
l/min l/min Flowl/minrate l/min
1.00 Flow rateFlow l/minrate l/min 1 1/2” 10Valves FHP 500 2” Flow rate

Δp bar
125 3/4”
Δp bar

FHP 500 1/2” Valves FHP 010 - 011

0 15 FHP 010 15 - 011 FH
Δp bar

1.000.00 0
Δp bar

1.50 15
Bypass valve Bypass valve pressure drop
pressure
Valves
0 50 100 150
Check Valve200 1250 0 FHPdrop 6 - 011 12 18 24 32 5FHP 0 010 - 011 FHP
12 - 065 24 with36 48 60
Δp bar

1/2” 0.50 010 15 Filter housing check valve

0.50valve pressure drop
Bypass Flow rate l/min 5 15 Flow rate l/min 4.50
FHP 320 Flow Bypass
rate l/minvalve pressure drop FH
3
0.50 FHP 1.00
135 FHP 135 3/4” 3/4” 10
FHP 010 FHP 010 - 011
1.50 1.50 2” 15 15 - 011 10 10 1
Δp barΔp bar

Δp bar
Δp bar

p bar
FHP 010 Check Valve
- 011Valve
Check 1” 0.00 FHP
10 065 FHP 135
10
0.00 15 1” 150 153.00 0 150 300 450 600 750
0 FHP 150 300 450 600 750 2

Δp bar
0.00 0FHP 320 100
0.50 200 300 400 500 15 0
5 320 50 100 150 200 250
Δp barΔ
5 Flow rate l/min
1.00 1.501.00 Flow rate l/min

Δp bar
10 10 5
0 25 50 Flow
Check 75rate
Valvel/min
100 125 Flow rate l/min 2
Δp bar

5
Δp bar

Δp bar
Δp bar

10 Flow rate l/min 1 1/4” 10 5 101.50 1

Valves 0
FHP 500 FHP 010 -0011 FHP 0
Δp bar

1 1/2”
Δp bar
p bar

FHP 500
1.000.00 10
15
0.50 1.500.50 FHP 320 5
Bypass valve pressure
5
0 drop 150 300 450 600 750 15 0
69 912 1215 15
15 0 150 300 450 600 750 03 36
bar
Δp bar

0 0
Check Valve Flow rate l/min
Δp Δ

0 5
125
5 Flow rate l/min 1 1/2” 5
0 3 6 9 12 15
0.00 0 12 Flow rate 24Flow
l/minrate36l/min 48 60 0
FHP0.50
135 3/4” 5FHP 010 - 0011 0 70 140 Flow rate 210 l/min 280 350
1.000.00
1 1/2” 1.500.00Valves 2” 15 100 Flow rate l/min 10
Flow rate l/min
10 050 50 100 150 200 250 06 - 011 612 1218 1824 24 32 FHP 010 - 011 - Filter housing
Δp bar

Δp bar

0 100
Check Valve 150 200 250 0 FHP 010 32 with check valve
Δp bar

0 0 0 FHP 320
Flow rate1”l/min 15 FHP 4.50320 FH
Δp bar

250 Bypass valve pressure drop

0 Flow
6 rate l/min12 18 24 32 Flow Flow
24 rate l/min 36
rate l/min 48 60 4.50
0 FHP
24 135 48 72 96 120
0.00 50 0 FHP 320 12
5FHP 320 15- Pressure drop in Reverse flow valves 1
1.00 0.50 5 10 4.50 Flow rate l/min FHP 500 Flow rate l/min 1 FH
0 100 200Flow rate300l/min 400 500 0 50 100 150 200 250 3.60
Δp bar
Δp bar

FHP 010 - 011 Flow rate l/min FHP 065 FHP 065 Flow rate l/min 1
15 15 10 15 3.00 3.00 1
Δp bar

FHP 065 0 FHP 135 0 10

Δp bar

0.50 0.00 15 5 15 FHP

Δp bar

0 FHP 320 3.00 500 300 450 600 750 6 9 12 15

0FHP 500 150 50 15 0 150 0
2.40 3 2
Δp bar

1.50 15 300 100 450 150 600 200 750 2

Δp bar

500 10 0 250 5 10 Flow rate l/min Flow rate l/min

Δp bar

Flow raterate
Check l/min
Valve 10 1.50 1.50
Flow l/min 1 1/2” 2 5
Δp bar

Δp bar

2
Δp bar

0.00 10 0 10
1 1/2” 10 1.50 1.20
0 1.00 1050 FHP 500100
Valves 150 200 250 0 6 12 18 24 32
bar

bar

2” 0
FHP 010
5 - 011 FHP 010FHP- 011
320 - Filter housing with check valve FHP 3
155 Flow rate l/min 5 0.00
bar

bar

15 3 Flow rate6 l/min 4.500.00

Δp bar

0 9 12 15
ΔpΔp

Bypass valve pressure drop

ΔpΔp

0 0 070 70
140 140
210 210
2801 280350 350
2” 5 5 0.00 Flow rate l/min 48Flow
0.50
5 5
0 0 70 140 210 280 350
0.00 0 24 Flow rate l/minrate72l/min 96 120
0 010 - 011
FHP FHP 065 0 150 300 Flow rate
450 l/min 600 750
10 15 10 0 3.00
2”
250 15 0 6 12 18 24 32 0 FHP 320 012 1224Flow rate 2436l/min 36 48 4860 60 Flow rate l/min
Δp bar

Δp bar

Δp bar

0 0 FHP 320 - Pressure drop in Reverse flow valves

Flow 0 4.50 Flow rateFlow
l/min rate l/min FHP 3.60500 FHP 500 FH
0.00
0 0 12 24 rate l/min 36 48 60 0 24 48 72 96 120 3.60 1 - Reverse flow 2
500 5 0 50 100 150 200 250 10 5 0 FHP 500 150 300 rate l/min 450 600 1 750 FHP 500 - Pressure drop in Reverse flow valve 1 1
10 0 150 300Flow rate
450l/min 600 750 3.60 Flow 1.50 2 - In filter direction
Flow rate l/min FHP 135 Flow rate l/min
Δp bar

FHP 065 Flow rate l/min

Δp bar

15 FHP 135 15 1
15 3.00 2.40 2.40
0 FHP 135500
Δp barΔp bar

5 0
Δp bar

5 15 0.00
Δp bar

Valves 2.40
FHP 010 - 011 2 FHP 010 - 011 -70Filter housing
750 0 150 300 450 600 750
15 0 3 6 9 12 15 0 140 with check 210 valve 280 350 2
2
2” Bypass valve 10 pressure drop Flow rate l/min 10 1.50 10 Flow rate l/min 1.20 Flow rate l/min
1.20 Valves
Δp bar
Δp bar

2
Δp bar Δp bar

0 10 0
2” FHP 010 - 0116 12 18 24 32 0 1.20 12 24 36 48 60
15 05 FHP 010 10
Δp bar

- 011 FHP 010

FHP- 320
5 0.00 5 - FilterFlow
011 ratewith
housing l/mincheck valve FHP0.00
320FHP- Pressure
5000.00 drop in Reverse flow valves FHP 5
15 Flow rate l/min 4.50 0 70 140 210 280 350 3.60
0 150 300 1 450 600 750
Δ

5 1 0 150 300 450 600 750

0.00 Flow rate l/min Flow rate l/min
10 FHP 0 065 5
FHP 135
0 0 150 300 450 600 750 Flow rate l/min
15 10 0 15 0
3.00 0 2448Flow rate 4872l/min 72 2.40
Δp bar

12 24 36 48 60 024 96 96
120 120 1 - Reverse 1 -flow
Reverse flow
0
Δp bar

Δp bar
Δp bar

Flow rate l/min 3.60

FHP 500 Flow rate Flow
l/min rate l/min FHP 500 filter2direction
2 - -InPressure - Indrop
filterindirection
Reverse flow valve
5 00 24
150 48
300 72
450 96
600 120
750 0 1 - Reverse flow 2 2
750 10 1
10 5 Flow rate l/min
Flow rate l/min 1.50 0 2 - In filter
3 direction
6 9 12 15 1.20
Δp bar

FHP 135 Flow rate l/min

Δp bar

15 2.40
0 5FHP 010 - 011 - Filter housing with check valve
Δp bar

5 0 0 FHP 010 6 - 011 12 18 24 32 0.00 0.00

15
10
0 3 6
Flow rate l/min
9 12 15 0FHP 320 70
4.501.20 140 210 280 2 350 FHP 320 0 - Pressure 150 drop in300 Reverse flow450 valves 600 750
Flow rate l/min Flow rate l/min Flow rate l/min
Δp barΔp bar

0 1
0
10
FHP 065 12 0 24 48 72 96 120 1 - Reverse flow
15 05 housing 24 36 48 60
32 Filter FHP 320
with check valve
Flow rate l/min
Pressure
3.000.00 drop in reverse
FHP 320 FHP- 500
Pressure drop Flowinrate flowl/min
Reverse
valves
flow valves
Pressure
FHP 500 2 -drop
-InPressure
filterindirection
reverse flow valves
drop in Reverse flow valve
Δp bar

4.50 3.60 0 150 300 450 600 750

5 1 1 2
Flow rate l/min 1 - Reverse flow
10 FHP 0 135 1.50
15 2 - In filter direction
Δp bar

3.00 0 24 48 72 96 120 2.40 1 - Reverse flow

Flow rate l/min 2 - In filter direction
Δp bar

Δp bar

0
5 0 3 6 9 12 2 15 0.00 2
10 Flow rate l/min 1.20 0 70 140 210 280 350
1.50
Δp bar

Flow rate l/min 447 High Pressure filters

0
32 5 0 12
0.00 FHP 320 24 36 48 60 FHP 320 - Pressure drop in Reverse flow valves
0.00
FHP FHP010 - FHP011
Designation & Ordering code
COMPLETE FILTER
Series and size Configuration example: FHP010 2 B A B 2 A03 N P01
FHP010 FHP011
Length
1 2 3 4

Valves
S Without bypass
B With bypass 6 bar
V With reverse flow, without bypass
Z With reverse flow, with bypass 6 bar
Seals
A NBR
V FPM
Connections
A G1/4”
B 1/4” NPT
C SAE 5 - 1/2” - 20 UNF
D G3/8”
E 3/8” NPT
F SAE 6 - 9/16” - 18 UNF
Connection for differential indicator
1 Without
2 With connection
Filtration rating (filter media)
A03 Inorganic microfiber 3 µm A16 Inorganic microfiber 16 µm
A06 Inorganic microfiber 6 µm A25 Inorganic microfiber 25 µm
A10 Inorganic microfiber 10 µm M25 Wire mesh 25 µm
Valves
Element ∆p S B V Z Execution
N 20 bar • • P01 MP Filtri standard
H 210 bar • • Pxx Customized

FILTER ELEMENT
Element series and size Configuration example: HP011 2 A03 A N P01
HP011
Element length
1 2 3 4

Filtration rating (filter media)

A03 Inorganic microfiber 3 µm A16 Inorganic microfiber 16 µm
A06 Inorganic microfiber 6 µm A25 Inorganic microfiber 25 µm
A10 Inorganic microfiber 10 µm M25 Wire mesh 25 µm

Seals
A NBR
V FPM
Element ∆p Execution
N 20 bar P01 MP Filtri standard
H 210 bar Pxx Customized

ACCESSORIES
Differential indicators page page
DEA Electrical differential indicator 517 DTA Electronic differential indicator 520
DEM Electrical differential indicator 517-518 DVA Visual differential indicator 520
DLA Electrical / visual differential indicator 518-519 DVM Visual differential indicator 520
DLE Electrical / visual differential indicator 519

Additional features page

T2 Plug 521

High Pressure filters 448

FHP010 - FHP011 FHP

13
Dimensions

13
Recommended
clearance space
for maintenance

Recommended
clearance space
for maintenance
FHP010
Filter H
length [mm]
1 92
2 103
3 153
4 203

Connections R
A M6
B-C 1/4” UNC
D M6
E-F 1/4” UNC
13
13

Recommended
clearance space
for maintenance FHP011
Filter H
length [mm]
1 92
Recommended 2 103
clearance space
for maintenance 3 153
4 203

Connections R
A M6
B-C 1/4” UNC
D M6
E-F 1/4” UNC

449 High Pressure filters

FHP FHP065 - FHP135 - FHP320
Designation & Ordering code
COMPLETE FILTER
Series and size Configuration example: FHP320 4 V A G1 A06 S P01
FHP065 FHP135 FHP320
Length FHP065 FHP135 FHP320
1 • • •
2 • • •
3 • • •
4 •
Valves FHP065 FHP135 FHP320
S Without bypass • • •
B With bypass 6 bar • • •
T With check valve, without bypass • • •
D With check valve, with bypass 6 bar •
V With reverse flow, without bypass •
Z With reverse flow, with bypass 6 bar •
Seals
A NBR V FPM
Connections FHP065 FHP135 FHP320
G1 G1/2” G3/4” G1 1/4”
G2 G3/4” G1” G1 1/2”
G3 1/2” NPT 3/4” NPT 1 1/4” NPT
G4 3/4” NPT 1” NPT 1 1/2” NPT
G5 SAE 8 - 3/4” - 16 UNF SAE 12 - 1 1/16” - 12 UN SAE 20 - 1 5/8” - 12 UN
G6 SAE 12 - 1 1/16” - 12 UN SAE 16 - 1 5/16” - 12 UN SAE 24 - 1 7/8” - 12 UN
F1 - 3/4” SAE 3000 psi/M 1 1/4” SAE 3000 psi/M
F2 - 1” SAE 3000 psi/M 1 1/2” SAE 3000 psi/M
F3 - 3/4” SAE 3000 psi/UNC 1 1/4” SAE 3000 psi/UNC
F4 - 1” SAE 3000 psi/UNC 1 1/2” SAE 3000 psi/UNC
F5 - 3/4” SAE 6000 psi/M 1 1/4” SAE 6000 psi/M
F6 - 3/4” SAE 6000 psi/UNC 1 1/4” SAE 6000 psi/UNC

Filtration rating (filter media)

A03 Inorganic microfiber 3 µm
Valves Filter length
A06 Inorganic microfiber 6 µm Element ∆p S B T D V Z Execution 1 2 3 4
A10 Inorganic microfiber 10 µm N 20 bar • P01 MP Filtri standard • • • •
A16 Inorganic microfiber 16 µm R 20 bar • • P02 Maintenance from the bottom of the housing •
A25 Inorganic microfiber 25 µm H 210 bar • Pxx Customized
M25 Wire mesh 25 µm S 210 bar • •

FILTER ELEMENT
Element series and size Configuration example: HP320 4 A06 A S P01
HP065 HP135 HP320
Element length HP065 HP135 HP320
1 • • •
2 • • •
3 • • •
4 •
Filtration rating (filter media) Seals Element ∆p Execution
A03 Inorganic microfiber 3 µm A16 Inorganic microfiber 16 µm A NBR N 20 bar P01 MP Filtri standard
A06 Inorganic microfiber 6 µm A25 Inorganic microfiber 25 µm V FPM R 20 bar Pxx Customized
A10 Inorganic microfiber 10 µm M25 Wire mesh 25 µm H 210 bar
S 210 bar
ACCESSORIES
Differential indicators page page
DEA Electrical differential indicator 517 DTA Electronic differential indicator 520
DEM Electrical differential indicator 517-518 DVA Visual differential indicator 520
DLA Electrical / visual differential indicator 518-519 DVM Visual differential indicator 520
DLE Electrical / visual differential indicator 519

Additional features page

T2 Plug 521
High Pressure filters 450
FHP065 - FHP135 - FHP320 FHP
Dimensions

Recommended
clearance space
for maintenance

FHP065
Filter H
length [mm]
1 196
2 227
3 329

Connections R
G1-G2 M8
G3-G4-G5-G6 5/16” UNC

451 High Pressure filters

FHP FHP065 - FHP135 - FHP320
Dimensions

Recommended
clearance space
for maintenance

FHP135
Filter H
length [mm]
1 260
2 373
3 448

Connections R
G1-G2 M10
G3-G4-G5-G6 3/8” UNC
F1-F2 M10
F3-F4 3/8” UNC
F5 M10
F6 3/8” UNC

High Pressure filters 452

FHP065 - FHP135 - FHP320 FHP
Dimensions

Length 1 - 2 - 3 Length 4

Recommended
clearance space
for maintenance

Recommended
clearance space
for maintenance

FHP320
H2 [mm]
Filter H Execution
length [mm] P01 P02
1 299 150 -
2 422 150 -
3 554 150 -
4 707 150 550

Connections R
G1-G2 M12
G3-G4-G5-G6 1/2” UNC
F1-F2 M12
F3-F4 1/2” UNC
F5 M12
F6 1/2” UNC

453 High Pressure filters

FHP FHP500
Designation & Ordering code
COMPLETE FILTER
Series and size Configuration example: FHP500 4 V A G1 A06 S P01
FHP500
Length
1 2 3 4 5

Valves
S Without bypass
B With bypass 6 bar
T With check valve, without bypass
D With check valve, with bypass 6 bar
V With reverse flow, without bypass
Z With reverse flow, with bypass 6 bar
Seals
A NBR
V FPM
Connections
G1 G1 1/2” F4 2” SAE 3000 psi/UNC
G2 1 1/2” NPT F5 1 1/2” SAE 6000 psi/M
G3 SAE 24 - 1 7/8” - 12 UN F6 1 1/2” SAE 6000 psi/UNC
F1 1 1/2” SAE 3000 psi/M F7 2” SAE 6000 psi/M
F2 1 1/2” SAE 3000 psi/UNC F8 2” SAE 6000 psi/UNC
F3 2” SAE 3000 psi/M

Filtration rating (filter media)

A03 Inorganic microfiber 3 µm
Valves Filter length
A06 Inorganic microfiber 6 µm Element ∆p S B T D V Z Execution 1 2 3 4 5
A10 Inorganic microfiber 10 µm N 20 bar • • • P01 MP Filtri standard • • • • •
A16 Inorganic microfiber 16 µm S 210 bar • • • P02 Maintenance from the bottom of the housing • •
A25 Inorganic microfiber 25 µm P03 Drain plug on length 1 - 2 - 3 • • •
M25 Wire mesh 25 µm Pxx Customized

FILTER ELEMENT
Element series and size Configuration example: HP500 4 A06 A S P01
HP500
Element length
1 2 3 4 5

Filtration rating (filter media)

A03 Inorganic microfiber 3 µm
A06 Inorganic microfiber 6 µm Seals Element ∆p Execution
A10 Inorganic microfiber 10 µm A NBR N 20 bar P01 MP Filtri standard
A16 Inorganic microfiber 16 µm V FPM S 210 bar Pxx Customized
A25 Inorganic microfiber 25 µm
M25 Wire mesh 25 µm

ACCESSORIES
Differential indicators page page
DEA Electrical differential indicator 517 DTA Electronic differential indicator 520
DEM Electrical differential indicator 517-518 DVA Visual differential indicator 520
DLA Electrical / visual differential indicator 518-519 DVM Visual differential indicator 520
DLE Electrical / visual differential indicator 519

Additional features page

T2 Plug 521

High Pressure filters 454

 FHP500 FHP
Dimensions

Length 1 - 2 - 3 Length 4 - 5

Recommended clearance space for maintenance

Recommended clearance space for maintenance

FHP500
H2 [mm]
Filter H Execution
length [mm] P01 P02
1 330 150 -
2 420 150 -
3 496 150 -
4 654 150 480
5 820 150 650

Connections R
G1 M12
G2-G3 1/2” UNC
F1 M12
F2 1/2” UNC
F3 M12
F4 1/2” UNC
F5 M12
F6 1/2” UNC
F7 M12
F8 1/2” UNC

455 High Pressure filters

FHP SPARE PARTS
Order number for spare parts
FHP 010 - 011
4 3d 3e

3a Q.ty:
nr. 0 pcs. for version 1
3b (without indicator port)

nr. 1 pc. for version 2

3c (with indicator port)
Q.ty: 1 pc. Q.ty: 1 pc.
2 Item: 2 3 (3a ÷ 3e) 4
Filter Filter Seal Kit code number Indicator connection plug
series element NBR FPM NBR FPM
See
FHP 010 - 011 order 02050501 02050492 T2H T2V
table

FHP 500
4 3d

3e

3g

3a

3b

3c

3c

3b
Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc.
Item: 2 3 (3a ÷ 3g) 4
Filter Filter Seal Kit code number Indicator connection plug
series element NBR FPM NBR FPM
See
3f
FHP 500 order 02050330 02050331 T2H T2V
table

High Pressure filters 456

 SPARE PARTS FHP
Order number for spare parts
FHP 065 - 135 - 320

3m 3h

3d 3e

5
4

6
3g
3m 3h
3a

3b

3c

2 3c

3b

3f

Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc. Q.ty: 1 pc.
Item: 2 3 (3a ÷ 3m) 4 5 6
Filter Filter Seal Kit code number Indicator connection plug Bypass assembly Non-bypass assembly
series element NBR FPM NBR FPM NBR FPM NBR FPM
FHP 065 See 02050265 02050276 02001116 02001136 02001142 02001139
FHP 135 order 02050269 02050280 T2H T2V 02001117 02001137 02001143 02001392
FHP 320 table 02050272 02050283 02001118 02001138 02001144 02001395

457 High Pressure filters