Checklist for valve specification VALVES FOR E X TREMES

Please use the checklist to outline the specification Your RFQ:

you require. Send checklist to: [email protected]

1. Valve type, sizes and quantity 3. For strainers

Quantity*: Required wire mesh size:

pieces 40 μm other

Kind of actuation*: Max. pressure drop:

manual pneumatic electric solenoid Δp

Valve type*:
series
4. For control valves
Globe valve (on-off):
manual pneumatic
Required flow rate:
Download checklist as PDF-file: www.stoehr-valves.com/support

Kv- /Cv-Wert
Control valve:
yes
Required control characteristic:
equal percentage
Check valve:
yes

Overflow check valve: 5. Further options

yes

Strainer: Welding flange for vacuum-jacketing*:

yes yes

Body type*: Surface treatment:

straight-through (180°) angle (90°) polished electro polished

Nominal diameter*: Purge connections:

DN yes

Nominal pressure: Purge valve:

PN minimal PN normal PN maximum yes

Cracking pressure for check valve: Thermal coupling:

bar copper flange sliding thermal contact

Type of medium or combination of medias*: Customer specific acceptance tests:

e.g. He please specify

Medium temperature*:
temp. °C K
6. Supplementary information
Required connections:
type measurement
standard
Expected heat input:
Watt

Temperature installation area:

C°

2. Actuator Location of installation:

indoor outdoor
* = mandantory | blue = standard

In case of pneumatic actuator, Special requirements:

desert, salty water etc.
how much service pressure is given?
6 bar
Installation position:
In case of electrical power, normal optional

which voltage and type is required? Others:

Volt type of voltage
closing time opening time min. hubs

Fail safe position*:

none NO NC

ATEX: 7. Sender
yes

Mounting parts*: Company, Institute:

pilot valve limit switches IP regulator

air pressure reducer air filter Contact name:

Phone:

Signature:

STÖHR ARMATUREN GmbH & Co KG fon: +49 8231 34 90 – 0

Dornierstraße 4 fax: +49 8231 34 90 – 45 email print
86343 Königsbrunn, Germany [email protected]