Scribd
Upload
158 views1 page

Automig Nicu-7 / Tigfil Nicu-7: Ernicu-7 Sni 4060

This document provides information on solid welding wire used for nickel-copper alloy welding. The wire has a typical 65Ni/30Cu/3Mn/2Ti composition and is classified as SNi 4060 and ERNiCu-7. It can be used for welding Monel and NiCu alloys to themselves or to mild steel. Typical applications include heat exchangers, piping, vessels and components in salt purification and food/pump/valve manufacturing. The wire is supplied on spools in 1.2mm, 1.6mm or 2.0mm diameters with mechanical properties varying based on shielding gas used.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views1 page

Automig Nicu-7 / Tigfil Nicu-7: Ernicu-7 Sni 4060

This document provides information on solid welding wire used for nickel-copper alloy welding. The wire has a typical 65Ni/30Cu/3Mn/2Ti composition and is classified as SNi 4060 and ERNiCu-7. It can be used for welding Monel and NiCu alloys to themselves or to mild steel. Typical applications include heat exchangers, piping, vessels and components in salt purification and food/pump/valve manufacturing. The wire is supplied on spools in 1.2mm, 1.6mm or 2.0mm diameters with mechanical properties varying based on shielding gas used.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AUTOMIG NiCu-7 /

GMAW/GTAW
TIGFIL NiCu-7 NICKEL ALLOYS

MONEL SOLID WIRE FOR NICKEL-COPPER ALLOY WELDING

CLASSIFICATION : EN ISO 18274 AWS A/SFA 5.14 APPROVALS :

SNi 4060 ERNiCu-7 -

KEY FEATURES :
• Monel solid wire • Low iron in the deposit exhibit maximum
• Typical 65Ni/30Cu/3Mn/2Ti alloy corrosion resistance
• Easily machinable deposit in as welded and • Radiographic weld quality
stress relieved condition
GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: Ar or Ar/He 15-22 10-20
GTAW: Ar 10-15 -

TYPICAL APPLICATIONS :
• Welding Monel and NiCu alloys to itself, to • Welding of ASTM B127/163/164/165
mild and low alloyed steels • Heat exchanger, Piping, Vessels, Salt
• Overlaying on steel to obtain a corrosion purification
resistant surface • Food, Pumps and Valves manufacturing units

STORAGE / HANDLING :

Keep dry and follow handling instructions mentioned on the box


CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :
C Mn Fe S P
Specification 0.15 max 4.0 max 2.5 max 0.015 max 0.02 max
Si Cu Al Ti Ni
Specification 1.25 max Bal. 1.25 max 1.5-3.0 62.0-69.0

MECHANICAL PROPERTIES OF ALL WELD METAL :


Condition UTS, MPa EL%
Typical As Welded 480 32
Mechanical properties will vary with the type of shielding gas used.

PACKING DATA :
Ø, mm Kg/Spool
Automig NiCu-7 1.2 12.5
1.6 12.5
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
2.0 x 1000 5 4 20
Tigfil NiCu-7
2.4 x 1000 5 4 20
3.2 x 1000 5 4 20

EQUIVALENT :
SMAW Electrode: Supermonel

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

51

You might also like