0% found this document useful (0 votes)
250 views9 pages

9 - Well Test Exercise 1 - Grupo 1 - PDF

This document provides a technical summary of a well test for Well #1 at the Lamar site. It includes three main sections: [1] the wellbore configuration, [2] reservoir fluid properties including an initial production rate of 95 BOPD, and [3] pressure build-up data collected over 158 hours. An analysis of the pressure build-up data found a permeability of 20.75 md, a skin factor of 5.36, and a radius of investigation of 1100 feet at 100 hours.

Uploaded by

Willian Duque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
250 views9 pages

9 - Well Test Exercise 1 - Grupo 1 - PDF

This document provides a technical summary of a well test for Well #1 at the Lamar site. It includes three main sections: [1] the wellbore configuration, [2] reservoir fluid properties including an initial production rate of 95 BOPD, and [3] pressure build-up data collected over 158 hours. An analysis of the pressure build-up data found a permeability of 20.75 md, a skin factor of 5.36, and a radius of investigation of 1100 feet at 100 hours.

Uploaded by

Willian Duque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Consorcio Lamar

Well Test Exercise

LAMAR
WELL #1 PBU Test
Technical Summary
Consorcio Lamar

Section 1: Wellbore Configuration

Deviated Hole NO
Treat Down TUBING
Bit Size 2 3/8 in.
Spacing 80 Acres

Section 2: Reservoir Fluid

Well Type Oil


Reservoir Temperature 155 degF
Oil Gravity 38 degAPI
Initial Gas/Oil Ratio (GOR) 500 scf/bbl
FVF ..1.24 RB/STB
Viscosity ..0.85 cp
Compressibility (total) 15.0 x 10-6 psi-1
Porosity 15 %
Initial Reservoir Pressure 3860 psi
Sw 18 %
Top 6300.0 ft
Height 15 ft
Production test prior to shut-in 95 BOPD (Constant rate test for 505 hrs prior to shut-in)

Section 3: Build-Up Data

DeltaTime Pressure Pwf


hrs psi
0 3041
0.00158 3064
0.00315 3085
0.00631 3125
0.0158 3222
0.0315 3331
0.0631 3444
0.158 3533
0.316 3560
0.631 3580
1.58 3603
3.16 3620
Consorcio Lamar

6.30 3636
15.8 3655
31.6 3668
63.1 3677
158.0 3681

DATOS DE ENTRADA
Program WELLTEST Version 6.1.02

DESCRIPTION
-----------------------------------------------------------------
Operator FRAMOLAC EQUIPO 1
Well name 1
Fluid type Oil
Reservoir type Conventional
Analysis mode Interpret
Test type Buildup
Afterflow No afterflow rates available
Remarks

RESERVOIR DATA
-----------------------------------------------------------------
Formation temperature 155 deg F
Initial reservoir pressure 3860 psi
Net pay 15 ft
Kv/Kh ratio 0.1
Porosity 0.15 fraction
Water saturation 0.18 fraction
Gas saturation 0 fraction
Oil saturation 0.82 fraction
Formation compressibility 4E-006 1/psi

WELLBORE DATA
-----------------------------------------------------------------
Wellbore radius 0.0989583 ft
Portion of pay completed 1 fraction
Angle from vertical 0 degree

OIL PROPERTIES
-----------------------------------------------------------------
Oil properties User input
Oil formation volume factor 1.24 RB/STB
Oil compressibility 1.158E-005 1/psi
Oil viscosity 0.85 cp
Consorcio Lamar

WATER PROPERTIES
-----------------------------------------------------------------
Water properties User input
Water formation volume factor 1.02 RB/STB
Water compressibility 3.6E-006 1/psi
Water viscosity 0.75 cp

FLUID PROPERTIES AT REFERENCE PRESSURE


-----------------------------------------------------------------
Reference pressure 3860 psi
Initial oil FVF 1.24 RB/STB
Initial oil viscosity 0.85 cp
Initial total compressibility 1.41436E-005 1/psi

TIME ZERO
-----------------------------------------------------------------
Time zero 0 hr
Pressure at time zero 3041 psi

PRODUCTION RATES PRIOR TO TEST


-----------------------------------------------------------------
Cumulative Production
Time Rate
(hr) (STB/D)
---------- ----------
505 95

RESERVOIR MODEL
-----------------------------------------------------------------
Wellbore storage Constant WBS coefficient
Inner boundary condition Radial flow
Reservoir model Single porosity
Outer boundary condition Infinite-acting
Consorcio Lamar

ANALISIS DE RESULTADOS

CURVA TIPO

Zona de Zona de Flujo


Llene Transicion Radial

GRÁFICO SEMILOG
Consorcio Lamar

GRÁFICO DE DIAGNÓSTICO

Realizando un análisis cualitativo del gráfico de la curva tipo y el gráfico de


diagnóstico, se observa que la zona de llene se alcanza a tiempos bastante
tempranos. Posterior al período de llene se observa en la zona de transición la
forma típica de lomo de camello moderadamente pronunciada lo cual es
indicador de un factor de daño en el pozo de moderada magnitud. Finalmente se
observa la zona de flujo radial, la cual se mantiene estable por un periodo
considerable hasta que alcanza un límite donde comienza a declinar la presión.

A continuación se muestra el sumario de resultados obtenido:


Consorcio Lamar

SUMARIO DE RESULTADOS

MODEL PARAMETERS
-----------------------------------------------------------------
Initial Final
Estimate Value
---------- ----------
* Permeability 20.73 20.75 md

WBS coefficient 0.0003372 bbl/psi

Skin factor 5.364

* Parameter(s) allowed to vary during automatic typecurve matching

Original oil content 769.58 STB/acre-ft

SKIN FACTOR
-----------------------------------------------------------------
Partial penetration skin 0
Deviated wellbore pseudo-skin 0

Damage skin 5.36

Pressure drop due to damage skin 244 psi

Flow efficiency 64.7 %

ESTIMATED FLOW REGIMES


-----------------------------------------------------------------
End of wellbore storage 0.246 hr

RADIUS OF INVESTIGATION
-----------------------------------------------------------------
Time Radius of
Investigation
(hr) (ft)
---------- ----------
0.01 11
0.03 19
0.1 35
0.3 60
1 110
3 190
10 350
30 600
100 1100
300 1900
Consorcio Lamar

PLOTTING FUNCTIONS
-----------------------------------------------------------------
Variable rate analysis method Drawdown type curves with radial equivalent time
Time plotting function Radial equivalent time
Pressure plotting function Pressure change

Time match point (t/tD) 0.003121 hr


Pressure match point (p/tD) 45.43 psi
CDe2s 4.41E+007

Test Corrected Time Measured Corrected Pressure Derivative


Time Time Plotting Pressure Pressure Plotting Plotting
Function Function Function
(hr) (hr) (hr) (psi) (psi) (psi) (psi)
---------- ---------- ---------- ---------- ---------- ---------- ----------
0.00158 0.00158 0.00158 3064 3064 23 21.62
0.00315 0.00315 0.00315 3085 3085 44 41.16
0.00631 0.00631 0.00631 3125 3125 84 74.77
0.0158 0.0158 0.0158 3222 3222 181 135.6
0.0315 0.0315 0.0315 3331 3331 290 167.9
0.0631 0.0631 0.06309 3444 3444 403 146.4
0.158 0.158 0.158 3533 3533 492 67.64
0.316 0.316 0.3158 3560 3560 519 34.2
0.631 0.631 0.6302 3580 3580 539 27.39
1.58 1.58 1.575 3603 3603 562 24.86
3.16 3.16 3.14 3620 3620 579 24.04
6.3 6.3 6.222 3636 3636 595 22.44
15.8 15.8 15.32 3655 3655 614 20.25
31.6 31.6 29.74 3668 3668 627 16.88
63.1 63.1 56.09 3677 3677 636 10.17
158 158 120.3 3681 3681 640 5.256

HISTORY MATCH
----------------------------------------------------------------------

Parameters
Initial Current
Estimate Value
Permeability 20.73 20.75 md

Statistics
Iteration 1
Fn Evaluations 2
Alpha 1
SSR 478.569
RMS Err 5.84666
r^2 0.999433
Elapsed time 0 seconds
This document was created with Win2PDF available at http://www.daneprairie.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.

You might also like