Environmental Studies

& Disaster Management

(EVS-121 & COM-121)

Course Instructor

Dr Imtiyaz Jahangir Khan

(Assistant Professor)

Division of Environmental Sciences

Faculty of Horticulture, SKUAST-K

Lecture-3

Syllabus:

Solid Waste Management:

(causes, effects and control measures of urban and industrial wastes)

SOLID WASTE MANAGEMENT

Introduction

Rapid population growth and urbanization in developing countries has

led to people generating enormous quantities of solid waste and consequent
environmental degradation. The waste is normally disposed in open dumps
creating nuisance and environmental degradation. Solid wastes cause a
major risk to public health and the environment. Management of solid
wastes is important in order to minimize the adverse effects posed by their
indiscriminate disposal.

Waste
1. It is a matter for which a specific owner ceases to have use for it.
2. It can be in a solid, liquid or in a gaseous form.

1
Solid Waste
It is non liquid waste arising from domestic, trade, industrial,
agricultural, mining, construction activities and from public sector.

Solid Waste Management

The process of removing the discarded materials from inhabited places

in a timely manner to prevent the spread of disease, and to dispose the
discarded materials in a manner that is environmentally acceptable.

Category/Types Sources of generation Types of solid wastes

Municipal solid Residential- Food wastes, kitchen

wastes family dwllings, wastes, ashes, plastics, etc.
appartments
Commercial- Food wastes, construction
stores, restaurents, wastes,plastics, etc.
workshops.
Open areas- Litter, Special wastes,
streets, parks, highways. rubish,etc.
Treatment plant sites- Treated waste/sludge.
waste water/industrial
treatmemt processes.

Industrial wastes Textiles, power plants, Metals, glass,

rubber,etc. gypsum,CCRs, etc.

Hazadous wastes Industries /Hospitals- Chem., pathological wastes,

infectious wastes,
pharmaceutical wastes, etc.,
(Toxic, Corrosive, highly
inflammable, explosive )
Agro wastes Farm lands, Grass lands, Baggase, rice & mustard
orchards, Gardens, etc. juice husk, weeds, etc. apple
factories pomase

2
CLASSIFICATION OF URBAN WASTES

Urban wastes are classified into:

Bio-degradable wastes - Those wastes that can be degraded by micro

organisms are called bio-degradable wastes Ex: Food, vegetables, tea leaves,
dry leaves, etc.

Non-biodegradable wastes: Urban solid waste materials that cannot be

degraded by micro organisms are called non-biodegradable wastes. Ex:
Polythene bags, scrap materials, glass bottles, etc.

SOURCES OF INDUSTRIAL WASTES

mineral processing industries. Ex: Nuclear plants: It generated radioactive

wastes
Thermal power plants: It produces fly ash in large quantities
Chemical Industries: It produces large quantities of hazardous and toxic
materials.
Other industries: Other industries produce packing materials, rubbish,
organic wastes, acid, alkali, scrap metals, rubber, plastic, paper, glass,
wood, oils, paints, dyes, etc.

Causes of Solid Waste

The increase in the quantity of solid waste is due to:

Overpopulation,
Growing Urbanization
Affluence (material comfort)
Technological advancement
Industry
Mining
Transport

EFFECT OF IMPROPER SOLID WASTE MANAGEMENT

1. Due to improper disposal of municipal solid waste on the roads and

immediate surroundings, biodegradable materials undergo decomposition
producing foul smell and become a breeding ground for disease vectors.

3
2. Industrial solid wastes are the source for toxic metals and hazardous
wastes that affect soil characteristics and productivity of soils when they are
dumped on the soil
3. Toxic substances may percolate into the ground and contaminate the
groundwater.
4. Burning of industrial or domestic wastes (cans, pesticides, plastics,
radioactive materials and batteries) produce furans, dioxins and
polychlorinated biphenyls that are harmful to human beings.
5. Solid waste management involves waste generation, mode of collection,
transportation, segregation of wastes and disposal techniques.

SOLID WASTE MANAGEMENT

Waste Management Hierarchy

The important steps involved in solid waste management are- Reduce,

Reuse and Recycle of Raw Materials

a. Reduce – If usage of raw materials is reduced, the generation of waste

also gets reduced.
b. Reuse - Refillable containers that are discarded after use can be
reused. Rubber rings can be made from discarded cycle tubes and this
reduces waste generation during manufacture of rubber bands.
c. Recycle- Recycling is the reprocessing of discarded materials into new
useful products Ex: Old aluminum cans and glass bottles are melted

4
 and recast into new cans and bottles, preparation of cellulose
insulation from paper, Preparation of automobile body and
construction material from steel cans This method (Reduce, Reuse &
Recycle), i.e, 3R's help save money, energy, raw materials and
reduces pollution.

Initial steps in Solid Waste management

In order to establish effective Solid waste management

1. Identify the type of waste (Bio and non biodegradable waste)
2. Identify the source of waste
3. Determine the potential health hazard of waste
4. Determine the volume of waste generated
5. Identify safe collection methods
6. Identify safe transportation methods
7. Identify safe disposal methods

Key components of Solid waste Management

SWM can be devided in to five key components

1. Generation of waste
2. Storage
3. Collection
4. Transportation
5. Disposal

1. Generation
Generation of solid waste is the stage at which materials become
valueless to the owner and since they have no use for them and require
them no longer, they wish to get rid of them. Items which may be valueless
to one individual may not necessarily be valueless to another. For example,
waste items such as tins and cans may be highly sought after by young
children.

2. Storage

Storage is a system for keeping materials after they have been discarded
and prior to collection and final disposal. Where on-site disposal systems
are implemented, such as where people discard items directly into family
pits, storage may not be necessary. In emergency situations, especially in
the early stages, it is likely that the affected population will discard
domestic waste in poorly defined heaps close to dwelling areas. If this is the
case, improved disposal or storage facilities should be provided fairly
quickly and these should be located where people are able to use them
easily. Improved storage facilities include:

Small containers: household containers, plastic bins, etc.

Large containers: communal bins, oil drums, etc.

5
 Shallow pits
Communal depots: walled or fenced-in areas

In determining the size, quantity and distribution of storage facilities the

number of users, type of waste and maximum walking distance must be
considered. The frequency of emptying must also be determined, and it
should be ensured that all facilities are reasonably safe from theft or
vandalism.

3. Collection

Collection simply refers to how waste is collected for transportation to the

final disposal site. Any collection system should be carefully planned to
ensure that storage facilities do not become overloaded. Collection intervals
and volumes of collected waste must be estimated carefully.

4. Transportation

This is the stage when solid waste is transported to the final disposal site.
There are various modes of transport which may be adopted and the chosen
method depends upon local availability and the volume of waste to be
transported. Types of transportation can be divided into three categories:

Human-powered: open hand-cart, hand-cart with bins, wheelbarrow,

tricycle
Animal-powered: donkey-drawn cart
Motorised: tractor and trailer, standard truck, tipper-truck

5. Disposal

The final stage of solid waste management is safe disposal where associated
risks are minimised. There are four main methods for the disposal of solid
waste:

Land application: burial or landfilling

Burning or incineration
Composting

1. LANDFILL:
Solid wastes are placed in a sanitary landfill in which alternate layers of
80 cm thick refuse is covered with selected earth-fill of 20 cm thickness.
After 2-3 years solid waste volume shrinks by 25-30% and land is used for
parks, roads and small buildings. This is the most common and cheapest
method of waste disposal and is mostly employed in Indian cities.

Advantages:
1. It is simple and economical
2. Segregation of wastes is not required
3. Land filled areas can be reclaimed and used for other purposes

6
4. Converts low-lying, marshy waste-land into useful areas.
5. Natural resources are returned to soil and recycled.

Disadvantages:
1. Large area is required
2. Land availability is away from the town, transportation costs are high
3. Leads to bad odor, if landfill is not properly managed.
4. Land filled areas will be sources of mosquitoes and flies requiring
application of insecticides and pesticides at regular intervals.
5. Causes fire hazard due to formation of methane in wet weather.

2. INCINERATION:

1. It is a hygienic way of disposing solid waste. It is suitable if waste

contains more hazardous material and organic content. It is a thermal
process and very effective for detoxification of all combustible
pathogens. It is expensive when compared to composting or land-
filling.
2. In this method municipal solid wastes are burnt in a furnace called
incinerator. Combustible substances such as rubbish, garbage, dead
organisms and non-combustible matter such as glass, porcelain and
metals are separated before feeding to incinerators.
3. The non-combustible materials can be left out for recycling and reuse.
The leftover ashes and clinkers may account for about 10 to 20%
which need further disposal by sanitary landfill or some other means.
4. The heat produced in the incinerator during burning of refuse is used
in the form of steam power for generation of electricity through
turbines.
5. Municipal solid waste is generally wet and has a high calorific value.
Therefore, it has to be dried first before burning. Waste is dried in a
preheated from where it is taken to a large incinerating furnace called
"destructor" which can incinerate about 100 to 150 tons per hour.
ADVANTAGES:
1. Residue is only 20-25% of the original and can be used as clinker
after treatment
2. Requires very little space
3. Cost of transportation is not high if the incinerator is located within
city limits
4. Safest from hygienic point of view
5. An incinerator plant of 3000 tons per day capacity can generate
3MW of power.

DISADVANTAGES:
1. Its capital and operating cost is high.
2. Operation needs skilled personnel.

7
 3. Formation of smoke, dust and ashes needs further disposal and
that may cause air pollution.

3.COMPOSTING:

It is another popular method practiced in many cities in our country.

In this method, bulk organic waste is converted into fertilizer by biological
action. Separated compostable waste is dumped in underground trenches in
layers of 1.5m and finally covered with earth of 20cm and left for
decomposition. Sometimes, Actionmycetes are introduced for active
decomposition. Within 2 to 3 days, biological action starts. Organic matter is
destroyed by actinomycetes and lot of heat is liberated increasing the
temperature of compost by 75C and the refuse is finally converted into
powdery brown colored odorless mass called humus that has a fertilizing
value and can be used in agriculture. Humus contains lot of Nitrogen
essential for plant growth apart from phosphates and other minerals.

ADVANTAGES:
1. Manure added to soil increases water retention and ion-exchange
capacity of soil.
2. This method can be used to treat several industrial solid wastes.
3. Manure can be sold thereby reducing cost of disposing wastes
4. Recycling can be done

DISADVANTAGES:

1. Non-consumables have to be disposed separately

2. The technology has not caught-up with the farmers and hence does
not have an assured market.

There are many waste types defined by modern systems of waste

management, notably including:

municipal solid waste (MSW)

construction waste and demolition waste (C&D)
institutional waste, commercial waste, and industrial waste (IC&I)
medical waste (also known as clinical waste)
hazardous waste, radioactive waste, and electronic waste
biodegradable waste

POLLUTER PAYS PRINCIPLE

8
The Polluter Pays Principle is a principle where the polluting party pays for
the impact caused to the environment. With respect to waste management,
this generally refers to the requirement for a waste generator to pay for
appropriate disposal of the waste.

Waste Management Policies

• Environment protection act, 1986
• Hazardous waste rule 1989
• Bio-medical waste rule 1998
• Municipal solid waste rule 2000
• Waste management act 1996
• Solid waste policy in India 2006