0% found this document useful (0 votes)
162 views

Template Datasheet

This document provides datasheets for CCTV equipment for a construction project, including: 1) Cameras that are IP-based, 4MP resolution with night vision up to 30 meters. 2) An NVR unit to store and playback video from minimum 8 camera inputs, with 1TB storage and HDMI/VGA outputs. 3) An unmanaged PoE switch with 8 ports to power and connect the IP cameras over 100 meters.

Uploaded by

Septian Firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
162 views

Template Datasheet

This document provides datasheets for CCTV equipment for a construction project, including: 1) Cameras that are IP-based, 4MP resolution with night vision up to 30 meters. 2) An NVR unit to store and playback video from minimum 8 camera inputs, with 1TB storage and HDMI/VGA outputs. 3) An unmanaged PoE switch with 8 ports to power and connect the IP cameras over 100 meters.

Uploaded by

Septian Firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

DATASHEET

JUDUL DOK

No. DOKUMEN
REV.0

PEMBANGUNAN PABRIK
XXXXXXXX

Paraf :

0 Issued for Review XX-XX-XX XXX XXX XXX


Dibuat Diperiksa Disetujui Disetujui
Rev Deskripsi Revisi Tanggal
Egineering FEED User
No Description Page
1 Cover 1 of 6
2 Index List 2 of 6
3 General Notes 3 of 6
4 Datasheet CCTV 4 of 6
5 Datasheet NVR, Switch, Monitor 5 of 6
6 Index List 6 of 6

No. DOKUMEN REV.0

0 XXX XXX XXX XX-XX-XX Issued for Review DATASHEET CCTV


Page
INDEX LIST
Rev. Prp. Chk. App. Date Description 2 of 6
GENERAL NOTES

1. NVR shall provide the following services as minimum :


Gather, store, archive, and reply picture from camera and allow search based on time and date.

2. Vendor shall responsible for supply and design CCTV system, hardware, and
software configuration.

3. Vendor shall design and supply suitable type of camera, hardware, cable and accessories for
particular application, to make the system completely fuction as mentioned in this document
for each station.

4. Vendor shall built, develop, and implement the software and hardware, write application software
as required,supervise the site installation and perform test prior the site acceptance tests assist in
commisioning as requested and provide all documentation.

5. Vendor shall provide the total system, including engineering, hardware, configuration, software,
and testing.

6. NVR, HDD (min.1TB) and monitor shall be supplied by vendor, include 1 unit LED Monitor 32"
for CCTV Monitoring.

7. Other doc. Project Reference:


- System block diagram
- Instrument location drawing
- Cable Route Drawing
- Cable Tray Route Drawing
- Hook-Up Drawing/Detail Drawing

No. DOKUMEN REV.0

0 XXX XXX XXX XX-XX-XX Issued for Review DATASHEET CCTV


Page
GENERAL NOTES
Rev. Prp. Chk. App. Date Description 3 of 6
1 Tag Number See on table list
2 Drawing No See General Note Sheet
GENERAL 3 Service See on table list
4 Area Classification Non Hazardous Area
5
6 Equipment Type Fix CCTV - IP Based
7 Quantity of IP CCTV 6 ea (See on table list)
8 IP Protection IP 66
9 Installation Location See on table list
10 Image Sensor 1/3" CMOS Prograsive Scan (Min. Spec)
11 Resolution 4 MP ( 2560 x 1440 )
12 Wide Angle Yes
13 Angle Adjustment Yes, Pan 0° to 355°, tilt: 0°to 70° (manual adjustment)
14 Video Format MPEG4
15 Video Compression Yes, H.265/H.264
16 Minimum Ilumination Color: 0.01 Lux @(F1.2, AGC ON) (VTA)
17 Control Pan Not Required
CAMERA
18 Tilt Not Required
19 Zoom Not Required
20 Material Metal and Plastic
21 IR Range Min. up to 30 meters
22 Image Setting Yes
12 VDC ± 25%, 5.5 mm coaxial power plug &
23 Power Supply
24 Suitable with PoE (802.3af, class 3)
25 Power Consumption VTA
26 Mounting Yes, Wall Mounted
27 Manufacturer HIKVISION or Equal
28 Model No. VTA
29
Notes:
1 VTA : Vendor to Advice
2 Tag Plate shall be 316 SS with min. thickness 1/16" for outdoor devices. Tag plate shall consist of information such as
Tag number, Service, Date of Manufacture. Indoor devices use plastic sticker for name tag.
The Tag Plate shall be attached with 16AWG SS wire or SS drive screw. The Dimensions of The tag shall be 1" x 2" as min.
The above requirement is additional to vendor model number and other data nameplate.

No. DOKUMEN REV.0

0 XXX XXX XXX XX-XX-XX Issued for Review DATASHEET CCTV Page
CAMERA
Rev. Prp. Chk. App. Date Description 4 of 6
1 Tag Number See on table list
2 Drawing No See General Note Sheet
GENERAL 3 Service See on table list
4 Area Classification Non Hazardous Area
5
6 NVR Yes, Required
7 Quantity of NVR 1 set of NVR
8 IP Video Input Min.8 Channel - IP CCTV
9 Compatible with spec. of suplied IP CCTV
10 NVR Video Output HDMI and VGA
11 Storage and Playback Yes, Compatible with min. 1TB HDD
12 HDD health Monitoring
13 Power Supply 220 VAC
NVR 14 Power Consumption VTA
15 Chasis 1.5 U (VTA)
16 Dimensions (W × D × H) VTA
17 Weight (without HDD) VTA
18 NVR Accessories Controller/Mouse and HDD 1TB as per min.
19 CCTV Panel Yes, See Note 3
20 Manufacturer HIKVISION or Equal
21 Model No. VTA
22
23 Switch Type Unmanaged PoE Switch
24 Quantity of Switch 1 Unit
25 Port 8, 10/100Mbps RJ45 ports (min.)
26 1, 100M Ethernet Port (min.)
27 Performance Suitable for CCTV and NVR
28 Power Over Ethernet Standard Class of PoE shall be suitable with supplied IP CCTV
29 working Distance Can be utilized for 100m
SWITCH
30 Power Supply 220VAC
31 Power Consumtion VTA
32 Dimensions (W × D × H) VTA
33 Weight VTA
34 Manufacturer HIKVISION or Equal
35 Model No. VTA
36
37 Monitor Type LED TV
38 Screen Dimension 32 inch
39 Input Connection HDMI, VGA, & input Audio
40 Power Supply 220VAC
41 Power Consumtion VTA
MONITOR
42 Dimensions (W × D × H) VTA
43 Weight VTA
44 Manufacturer Panasonic, Samsung, or Equal
45 Model No. VTA
46
Notes:
1 VTA : Vendor to Advice
2 Tag Plate shall be 316 SS with min. thickness 1/16" for outdoor devices. Tag plate shall consist of information such as
Tag number, Service, Date of Manufacture. Indoor devices use plastic sticker for name tag.
The Tag Plate shall be attached with 16AWG SS wire or SS drive screw. The Dimensions of The tag shall be 1" x 2" as min.
The above requirement is additional to vendor model number and other data nameplate.
3 Vendor shall provide suitable CCTV panel (exp : 4U Panel) for NVR and switch. CCTV panel will be place on Office Area.

No. DOKUMEN REV.0

0 XXX XXX XXX XX-XX-XX Issued for Review DATASHEET CCTV Page
NVR, SWITCH, MONITOR
Rev. Prp. Chk. App. Date Description 5 of 6
TABLE LIST

CAMERA
No. Tag.No Service Location Remarks
1 10-CCTV-001 Inside Factory - Main Exit Door Factory Indoor
2 10-CCTV-002 Inside Factory - Entry Factory Indoor
3 10-CCTV-003 Inside Factory - Temporary Testing Area Indoor
4 10-CCTV-004 Inside Factory - Operator Area Indoor
5 20-CCTV-001 Outside View - Exit factory Outdoor
6 20-CCTV-002 Outside View - Entry factory Outdoor

NVR
No. Tag.No Service Location Remarks
1 00-NVR-001 NVR CCTV at Office Indoor

SWITCH
No. Tag.No Service Location Remarks
1 00-SW-001 Switch CCTV - Office Indoor

MONITOR
No. Tag.No Service Location Remarks
1 00-MNT-001 CCTV Monitor - Office Indoor

No. DOKUMEN REV.0

0 XXX XXX XXX XX-XX-XX Issued for Review DATASHEET CCTV


Page
GENERAL NOTES
Rev. Prp. Chk. App. Date Description 6 of 6

You might also like