Chengdu SAND Electronic Co.

,Ltd
Chengdu SAND Electronic Co.,Ltd

Mechanical Melt Pressure Gauge

Description PT135 SERIES

SAND PT135 series mechanical melt pressure gauges are
ideal for melt pressure applications where the measurement
and control is in high temperature surroundings and in the
case of blackout.
The design on the rigid snout version of the mechanical
gauge can be rotated for unobstructed viewing, and the
optional built-in pressure transducer with 2.0mV/V output
and pressure transmitter with 4~20mA output are available
to monitor in remote by working with pressure
indicators.Thermocouple or RTD configurations are
available to provide melt temperature.

Features
Over 22 years of experience
Direct,local readings,Mechanical design; manufacturing sensors
0~25/40/70MPa(0~3500/5000/10000psi)
Stainless steel construction
Various thread available:1/2"-20 M14 M22 etc
400 (750 F) Rating
Standard diaphragm Inconel
TiN or TiAIN coating option
Measure / Display pressure at-line
No power required.
Thermocouple J,E,K or Pt100 available

Dimension

5000

0 0
40 35
30
40
25

SAND Melt Pressure

Measure or Control
BAR X 10
3000

MPa
20
15

0
00

10 i
ps
5
20

L2 L1
1000

Flexible Stem Length L2 1500mm Rigid Stem Length L1 600mm

110

PT135G PT135C PT135B

a: External zero adjustment a: External zero adjustment a: External zero adjustment
b: The Angle of header adjustment b: The Angle of header adjustment b: The Angle of header adjustment
c: Mounting bracket c: Mounting bracket c: Mounting bracket
d: Sensor 5PIN connector d:Transmitterpower input
e:Transmitter signal output
f: Zero output adjustment button
g: Full span adjustment button

Chengdu SAND Electronic Co.,Ltd, DOT bldg 7,Xingke Mid Rd,Jinniu Dist,Chengdu,Sichuan P.R China
Tel: +86 28 87078792 Fax: +86 28 87078762 Email:[email protected] www.sandcop.com
 Chengdu SAND Electronic Co.,Ltd
Chengdu SAND Electronic Co.,Ltd

Specifications

Mechanical Built-in Strain

Pressure range 0~25MPa,0~40MPa,0~70MPa(Bar/psi)
Accuracy 2.5% FS 0.5% FS, 1.0% FS, 1.5% FS
Repeatability 2.0% FS 0.4% FS, 0.8%FS, 1.2%FS

Input excitation 10VDC(6~12VDC) for transducer

24VDC(15~36VDC) for transmitter

Maximum diaphragm temperature 662 F (350 ) for rigid stem

752 F (400 ) for flexible

Maximum header temperature 80

40 psi/100
Zero shift due to temperature change 0.3 MPa/100

1/2-20 UNF thread (45 conical seal)

Process connection M14x1.5,M18x1.5,M22x1.5 etc
Electrical Connection 5PIN
2 . 0 m V / V , 3 . 0 m V / V, 3 . 3 3 m V / V
Output signal 0~5V,1~5V,0~10V,0~20mA,4~20mA
Insulation Resistance 500M
Temperature Sensor (optional) E,J,K,S type or Pt100

Ordering Guide

PT 135XX-XXX-XXX-XXX/XXX-X-XXX

Function Code
Output Signal
G=Mechanical style
C=Built in Pressure transducer 2.0mV/V,3.33mV/V
B=Built in Pressure transmitter 0~5V,0~10V
4~20mA,0~20mA

Thermocouple
Coating
Null=No thermocouple
Null=no coating J=J type
C=TiN / TiAlN coating K=K type
E=E type
Pt100=Pt100
Pressure range
0~5 to 200MPA Flexible stem length
0~35 to 2000Bar
Standard 470=470mm
0~500 to 30000PSI
Null= none
Process connection Rigid stem length
1/2-20=1/2-20UNF Standard
M14=M14 X 1.5 150=150mm
M18=M18 X 1.5

Chengdu SAND Electronic Co.,Ltd, DOT bldg 7,Xingke Mid Rd,Jinniu Dist,Chengdu,Sichuan P.R China
Tel: +86 28 87078792 Fax: +86 28 87078762 Email:[email protected] www.sandcop.com