0% found this document useful (0 votes)
53 views

The Work That Has Been Done in Workshop

The following work was done in the server room: - A 27U rack was installed and a 5KVA UPS was installed in the rack. Three Dell PowerEdge servers were installed for IPS, MMABIS Management, and MMABIS Matching. - RAID arrays were created on the servers and Debian 9.7 was installed with Docker. The MMABIS, IPS, and MegaMatcher applications were installed via Docker. - Two additional Dell PowerEdge servers were installed for FMS and PowerSync, RAID arrays were created, and Debian 9.7 with Docker was installed. The FMS and PowerSync applications were installed via Docker. - A Windows 2019 VM was created on the ES
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
53 views

The Work That Has Been Done in Workshop

The following work was done in the server room: - A 27U rack was installed and a 5KVA UPS was installed in the rack. Three Dell PowerEdge servers were installed for IPS, MMABIS Management, and MMABIS Matching. - RAID arrays were created on the servers and Debian 9.7 was installed with Docker. The MMABIS, IPS, and MegaMatcher applications were installed via Docker. - Two additional Dell PowerEdge servers were installed for FMS and PowerSync, RAID arrays were created, and Debian 9.7 with Docker was installed. The FMS and PowerSync applications were installed via Docker. - A Windows 2019 VM was created on the ES
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

The work that has been done in Workshop

 Install rack 27 u in the room 2.


 Install UPS APC 5KVA/4.5 KW in the rack.
 Installing 3 main servers Dell PowerEdge 2 (R740 XD) 1 (R740) (IPS , MMABIS
Management ,MMABIS Matching ).
 Create raid 10 in MMABIS Management Server .
 Create raid 5 in MMABIS Matching Server .
 Create raid 5 in IPS Server .
 Setup Debian 9.7 with dicker in all 3 main servers.
 Setup all applications in each server .

 Installing 2 main servers Dell PowerEdge R740(FMS , Powersync).


 Setup Debian 9.7 with Dockers in all 2 main servers
 Create raid 5 in FMS Server.
 Create raid 5 in PowerSync Server.
 Setup all application in each server.

 Create new VM Server Windows server 2019 in ESXi .


 Install Rolls (DHCP, DNS) , NTP and CA in server 2019.

 Waiting for the certificate to be generated from the company to install in all main
servers.

 Activation for MMABIS.


The work that has been done in Workshop

 Install rack 27 u in the server room 2.


 Install UPS APC  5KVA/4.5 KW in the rack.
 Installing 3 main servers Dell PowerEdge  2 (R740 XD) 1 (R740) (IPS ,
MMABIS Management ,MMABIS Matching ).
 Create raid 10 in MMABIS Management Server 103SAS HDD and 1 hot spare.
 Create raid 5 in MMABIS Matching Server, 7SAS HDD and 1 hot spare.
 Create raid 5 in IPS Server, 3SAS HDD and 1 hot spare.
 Setup Debian 9.7 with dicker in all 3 main servers.
 Install and setup MMABIS Management Docker in the MMABIS Management
server.
 Install and setup IPS Docker in the IPS server.
 Install and setup MegaMatcher Docker in the Matching server.
 IP address of the servers was provided from the Test and Pilot IP Schema.

 Installing 2 main servers Dell PowerEdge R740 for (FMS, PowerSync).


 Create raid 5 in FMS Server, 3SAS HDD and 1 hot spare.
 Create raid 5 in PowerSync Server, 3SAS HDD and 1 hot spare.
 Setup Debian 9.7 with Dockers in all 2 main servers.
 Install and setup PowerSync Docker in the PS server.
 Install and setup FMS Docker in the FMS server.
 Check the Cisco Switch configuration.
 Test and check the SonicWall firewall configuration.
 IP address of the servers, Cisco switch, and Firewall (SonicWall) was provided
from the Test and Pilot IP Schema.

 Create new VM Server Windows server 2019 in ESXi.


 Install Rolls (DHCP, DNS), NTP and CA in server 2019.
 Create and Test the CA certificates in PS server, (does not work).

 
Missing action.

 Waiting for the Trusted SSL Certificates to install them in (FMS, PS, MMABIS).

Postpone actions.  

 Activation for MMABIS.


 Testing the systems ( MMABIS, FMS, PS).
 test security of the ssl vpn (generated in the SonicWall firewall ) connection to the
mBUS.
 Secure the servers bios with a password.

You might also like