Scribd
Upload
162 views5 pages

Remote Access Configuration PDF

This document provides instructions for configuring remote access to a Windows server. It outlines setting a static IP address and installing remote features on the server. It also describes port forwarding on a router to expose port 3389 or an alternate port specified during remote access configuration in the Windows registry. Changing the registry key allows remoting into the server using a non-standard port.

Uploaded by

Ali Saivi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views5 pages

Remote Access Configuration PDF

This document provides instructions for configuring remote access to a Windows server. It outlines setting a static IP address and installing remote features on the server. It also describes port forwarding on a router to expose port 3389 or an alternate port specified during remote access configuration in the Windows registry. Changing the registry key allows remoting into the server using a non-standard port.

Uploaded by

Ali Saivi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

REMOTE ACCESS

CONFIGURATION
BY ALI SAIVI
REMOTE SETTINGS FOR SERVER WINDOWS
2019
• Default Port for Remote Access 3389
• Remote Configuration:
a) Make Pc With Static IP
b) Install Remote Feature on Server Role
c) Port Forwarding on Router (PTCL)
• Change Default Remote Access Port
PORT FORWARDING ON ROUTER (PTCL)

• Open Advance Setup


• Open NAT Service and Create a new Port 4000 – 4030
• Assign IP of Server to DMZ Host (i.e 192.168.10.254)
CHANGE DEFAULT PORT FOR REMOTE
ACCESS
• Open Regedit Service
• Open Following Path:
1.Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet \Control\Terminal
Server\WinStations\RDP-Tcp
2. Press PortNumber Modify Option
3. press Radio Button on Decimal and Change a Port number and Save.
4. Restart PC
Thanks

You might also like