ø22 YW SERIES CONTROL UNITS

Space-saving, thin style contact blocks

Separable operator part makes handling easy
• Small & light-weight
• Finger-safe screw terminals of IP20
(IEC 60529) enhance safety.
• Separate contact block makes
installing and removing easy.
• Pilot lights feature a large lens to
ensure a wide viewing angle for
increased safety.
• Non-glare matte surfaces on the but-
ton, lens, and bezel reduce reflection
of ambient light.
• UL, c-UL listed, EN compliant, and
CCC approved.

Contact Ratings (Contact Block) Specifications

Rated Insulation Voltage 600V Operating temperature: -20 to +55°C (no freezing)
Rated Thermal Current 10A Operating Operating humidity: 45 to 85% RH (no condensation)
Conditions Storage temperature: -45 to +80°C
Operating Voltage 24V 120V 240V 380V Storage humidity: 95% RH maximum
AC Resistive Load (AC-12) 10A 10A 6A 2A Degree of From panel front: IP65 (IEC 60529)
50/60 Hz Inductive Load (AC-15) 10A 6A 3A 1.9A Protection Terminal: IP20 (IEC 60529)
Resistive Load (DC-12) 8A 2.2A 1.1A – Insulation
DC 100 MΩ
Resistance
Inductive Load (DC-13) 4A 1.1A 0.55A –
Dielectric Contact block: 3500V, 1 minute
Strength Pilot light: 2100V, 1 minute
LED Lamp Ratings Vibration Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Type No. Rated Voltage Rated Current Color Code Resistance Damage limits: 30 Hz, amplitude 1.5 mm
10 mA (A, R, Y) Shock Operating extremes: 100 m/s2
LSED-6∗ 6V AC/DC
7 mA (G, PW, S) Resistance Damage limits: 1000 m/s2
A (amber)
13 mA (A, R, Y) G (green)
LSED-1∗ 12V AC/DC <Pushbutton and illuminated pushbutton>
11 mA (G, PW, S) PW (pure white) Momentary: 5,000,000 operations minimum
15 mA (A, R,Y) R (red) Mechanical
LSED-2∗ 24V AC/DC Maintained: 250,000 operations minimum
14 mA (G, PW, S) S (blue) Life
<Selector switch>
LSED-H∗ 110V AC/DC 5.5 mA Y (yellow)
250,000 operations minimum
LSED-M3∗ 230/240V AC/DC 2.7 mA Pushbutton: 100,000 operations minimum
Electrical Life
Selector switch: 100,000 operations minimum
Note: Specify a color code in place of ∗ in the Type No.
Yellow LED lamps are used for white illumination of pilot lights and illu-
minated pushbuttons.
Mounting Hole Layout
R0.8 max.
Incandescent Lamp Ratings 3.2 +0.2
ø22 0 The 3.2 recess is necessary
Type No. Rated Voltage Ratings .3 +0.4 when the anti-rotation ring is
0
24.1 +0.4

LS-T6 6V AC/DC 6.3V 1W used.

0

LS-T8 12V AC/DC 18V 1W

LS-T3 24V AC/DC 30V 1W

A B

Unit A (mm) B (mm)

Pushbutton
50 min. 30 min.
Selector Switch
Mushroom Pushbutton 50 min. 40 min.
Pilot Light 30 min.* 30 min.

* Keep a minimum spacing of 50 mm when using a lamp of over 1W.

4
 YW SERIES CONTROL UNITS ø22
Pushbuttons
Style Operation Contact Type No. Button Color Code Package Quantity
Flush 1NO YW1B-M1E10∗P B (black)
G (green)
R (red)
1NC YW1B-M1E01∗P
S (blue)
W (white)
2NO YW1B-M1E20∗P Y (yellow)

2NC YW1B-M1E02∗P

Momentary 1NO-1NC YW1B-M1E11∗P

3NO YW1B-M1E30∗P

3NC YW1B-M1E03∗P
5
2NO-1NC YW1B-M1E21∗P

1NO-2NC YW1B-M1E12∗P

1NO YW1B-A1E10∗P

1NC YW1B-A1E01∗P

Maintained 2NO YW1B-A1E20∗P

2NC YW1B-A1E02∗P

1NO-1NC YW1B-A1E11∗P

Extended 1NO YW1B-M2E10∗P B (black)

G (green)
R (red)
1NC YW1B-M2E01∗P
S (blue)
W (white)
Momentary 2NO YW1B-M2E20∗P Y (yellow)

2NC YW1B-M2E02∗P

1NO-1NC YW1B-M2E11∗P
5
1NO YW1B-A2E10∗P

1NC YW1B-A2E01∗P

Maintained 2NO YW1B-A2E20∗P

2NC YW1B-A2E02∗P

1NO-1NC YW1B-A2E11∗P

Mushroom ø40mm 1NO YW1B-M4E10∗P B (black)

G (green)
R (red)
1NC YW1B-M4E01∗P
S (blue)
W (white)
Momentary 2NO YW1B-M4E20∗P Y (yellow)

2NC YW1B-M4E02∗P

1NO-1NC YW1B-M4E11∗P
5
1NO YW1B-A4E10∗P

1NC YW1B-A4E01∗P

Maintained 2NO YW1B-A4E20∗P

2NC YW1B-A4E02∗P

1NO-1NC YW1B-A4E11∗P

Note: Specify a button color code in place of ∗ in the Type No.

5
 ø22 YW SERIES CONTROL UNITS
Dimensions (Pushbuttons)
Panel Thickness: 0.8 to 6
Gasket

10
10
0.5
M3.5 Terminal Screw
Contact Block Lock

Locking Ring
· Flush

(Button Diameter)

28.6
ø23.6

41.4
9
ø2

45.8 11 30

· Extended

(Button Diameter)

28.6
ø23.6

41.4
9
ø2
11
45.8 19 30

· Mushroom
(Button Diameter)

28.6

41.4
ø40

11
45.8 20.5 30

All dimensions in mm.