Scribd
Upload
413 views

Machining Technology MCQ

The document contains 23 multiple choice questions about machining and production processes. It covers topics like classifying metal removal processes, accuracy of machining versus casting, factors that determine part geometry in machining like tool shape and feed rate, surface finishes produced by turning operations, drilling tool characteristics, and applications of different machine tools like bar machines and vertical boring mills.

Uploaded by

Saed ELkelany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
413 views

Machining Technology MCQ

The document contains 23 multiple choice questions about machining and production processes. It covers topics like classifying metal removal processes, accuracy of machining versus casting, factors that determine part geometry in machining like tool shape and feed rate, surface finishes produced by turning operations, drilling tool characteristics, and applications of different machine tools like bar machines and vertical boring mills.

Uploaded by

Saed ELkelany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

.

……Mcq on machining and production

1.In how many groups,metal removal processes can be classified?

(a)2 (b)3 (c)4 (d)5

2.In general ,casting is not as accurate as machining.

(a)true (b)false

3.Machining provides good dimensional accuracy and surface finish .

(a)true (b)false

4.Machining is generally performed before processes such as casting and forging.

(a)true (b)false

5.In machining operations ,the generated part geometry is determined by…..

(a)the shape of the cutting tool

(b)feed trajectory of cutting tool

(c)both a and b

(d)None of the above

6.All of these operations are included in "forming shape "except…….

(a)broaching

(b)drilling

(c)contour turning

(d)form turning

7.Large feed and depth of cut in machining cause continuous chip

(a)true (b)false

8. A ductile material is one that will break as opposed to bending

(a)true (b)false

9. Discontinuous chips may be formed even in continuous process like turning

(a)true (b)false

10. Which type of surface is produced by turning operations in lathe machine?

(a)flat (b)cylindrical

(c)taper (d)none of the mentioned


11. The swing diameter over the bed is the largest diameter

(a)true (b)false

12. Which type of feed is needed in facing operation ?

(a)longitudinal

(b)cross

(c)both a and b

(d)none of the above

13. Moving of tool at an acute angle to the work part axis produces curve surfaces

(a)true (b)false

14. A fixture does not ………..

(a)hold the workpiece

(b)locate the workpiece

(c)guide the tool

(d)all of the above

15. All of these operations are related to drilling except……..

(a)reaming

(b) tapping

(c)tapering

(d)counterboring

16. Boring operation only enlarges an existing hole.

(a)true (b)false

17. Boring is an ………..turning operation.

(a)external

(b)internal

(c)lateral

(d)non of the above

18. Drilling tool has………….cutting edge(s)

(a)one

(b)two

(c)three

(d)multiple
19. In Bar Machine , at the end of the cycle ,a ………..operation is done.

(a)cut off

(b)drilling

(c)taper

(d)milling

20. Automatic screw machine is as same as Bar Machine but bigger.

(a)true (b)false

21. This machine is applied to short and light -weight parts

(a) Chucking Machine

(b)turret lathe

(c)vertical boring machine

(d)none of the above

22. Vertical Boring Mill is applied to materials with low L/D rate.

(a) true (b)false

23. Chamfering is done most often at……..angle

(a)45

(b)30

(c)15

(d)50

You might also like