100% found this document useful (4 votes)
1K views3 pages

Sliding Folding Doors

Wooden sliding folding doors are stackable wooden panels that slide and fold to open wide spaces of 10-12 meters. They consist of panels connected by hinges, tracks, and hardware that allow the doors to fold open seamlessly. Applications include indoor partitions, kitchen pantries, warehouses, and garages. Installation involves mounting tracks, hinges, brackets and hangers to interconnect panels that slide and fold open fully without obstructions.

Uploaded by

Tamanna Dudhoria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100% found this document useful (4 votes)
1K views3 pages

Sliding Folding Doors

Wooden sliding folding doors are stackable wooden panels that slide and fold to open wide spaces of 10-12 meters. They consist of panels connected by hinges, tracks, and hardware that allow the doors to fold open seamlessly. Applications include indoor partitions, kitchen pantries, warehouses, and garages. Installation involves mounting tracks, hinges, brackets and hangers to interconnect panels that slide and fold open fully without obstructions.

Uploaded by

Tamanna Dudhoria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

WOODEN SLIDING FOLDING DOORS

● Wooden sliding folding doors are stackable folding doors of multiple panels that slide and stack
neatly to one or two sides.
● This allows for a seamless transition between indoor and outdoor environment, areas free of any
barrier or obstruction.
● With multiple combinations, openings of 10-12m can be obtained.

APPLICATIONS:
 Indoor partition walls/doors
 Kitchen pantry doors
 Cupboards
 Patio partitions
 Warehouses
 Storages
 Garages

COMPONENTS OF A SLIDING FOLDING DOOR SYSTEM:


1. Sliding Track : Normally the same length as door opening.
2. Brackets : Bracket interval generally 1m
Wall brackets or soffit brackets
3. Hangers and Fixing Plates : 2-wheeled or 4-wheeled hangers
4. Bottom Guide
5. Pivot Set – provides hinge like movement to first door
6. End clips – Prevent tracks lateral movement
7. Hinges
8. Handles – opening and closing of door

TYPICAL ARRANGEMENTS :

● Typical arrangements - all leafs fold to one side


● Typical three panel door -Typical three panel door - hinged to one side with single oppposing
hinged leaf
● Typical three panel door - hinged to one side with single oppposing hinged leaf •
● Typical three panel door - hinged to one side
● Typical five panel door - hinged to one side
● Typical arrangement with sliding folding and single hinged leaf opposite (ok with 3 and 5 panel
designs)
● Typical five panel door - hinged to one side

ADVANTAGES:

1. They give you a 100% opening.


2. Single door provides easy access without having to open the whole door.

DISADVANTAGES:
1. If not operated properly the hardware can get damaged making the door very difficult to use.
2. There will always be some sort of track on the floor and in the case of the weatherproof door, this
track cannot be submerged into the ground unless there is a step between inside and outside.

SLIDING FOLDING DOORS PIVOT SYSTEM:

1. Mid-Pivot

2. End- Pivot

WOODEN SLIDING FOLDING SYSTEM WITH PIVOT MOUNTING :

● Folding mechanism for up to 6 wooden panel


● Panels weight : 75kgs/pane
● Panel Dimensions: 800X2700 mm max.
● Panels interconnected using hinge system.

● Connection and Installation :

1. Start panel connected with top and bottom pivot.


2. Intermediate folding panel connected with top, bottom and centre hinge
with handle
3. End panel connected with top and bottom guide roller.

WOODEN SLIDING FOLDING SYSTEM WITH HINGE MOUNTING :

● Folding mechanism for upto 6 wooden panel


● Panels weight : 75kgs/pane
● Panel Dimensions :800X2700 mm max.
● Panels interconnected using hinge system.

● Connection and Installation :

1. Start panel connected with top,middle and bottom bearing hinge for wall.
2. Intermediate folding panel connected with top, bottom and centre hinge with handle
3. Intermediate folding panel connected with top roller and bottom guide roller,centre
hinges
4. End panel connected with top and bottom guide roller.

TRACK DIMENSIONS :

● Top track :
Generally finished in aluminium with a size of 50mm*50mm in cross section

● Bottom track:
Aluminium/PVC - Dimensions- 25mm*26.5mm

INSTALLATION PROCESS :

1) Install the track – Top and Bottom or one of them as required


2) Mount the hinges
3) Attach the track hardware
4) Position the floor bracket
5) Attach the floor bracket
6) Hang the door
7) Attach the door aligners
8) Install the door pulls

You might also like