4DO DC24V/2A ST digital electronic Preface 1

___________________
module (6ES7132-4BD32-0AA0) 2
___________________
Properties

SIMATIC
___________________
Diagnostics 3

ET 200S distributed I/O system

4DO DC24V/2A ST digital electronic module
(6ES7132-4BD32-0AA0)

Manual

10/2015
A5E01001711-AB
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.

DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION
indicates that minor personal injury can result if proper precautions are not taken.

NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:

WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Siemens AG A5E01001711-AB Copyright © Siemens AG 2007 - 2015.

Division Digital Factory Ⓟ 10/2015 Subject to change All rights reserved
Postfach 48 48
90026 NÜRNBERG
GERMANY
Table of contents

1 Preface ................................................................................................................................................... 4
1.1 Preface ...................................................................................................................................... 4
2 Properties ............................................................................................................................................... 6
2.1 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0) ..................................6
3 Diagnostics ........................................................................................................................................... 11
3.1 Diagnostics using LED display ...............................................................................................11
Index..................................................................................................................................................... 12

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Manual, 10/2015, A5E01001711-AB 3
Preface 1
1.1 Preface

Purpose of the manual

This manual supplements the ET 200S Distributed I/O System Operating Instructions.
Functions which apply to the ET 200S in general are described in the ET 200S operating
instructions on the Internet (http://support.automation.siemens.com/WW/view/en/1144348).
The information in this document along with the operating instructions enables you to
commission the ET 200S.

Basic knowledge requirements

To understand these operating instructions you should have general knowledge of
automation engineering.

Scope of validity of the manual

This manual applies to this ET 200S module. It describes the components that are valid at
the time of publication.

Recycling and disposal

Due to the fact that it is low in contaminants, this ET 200S module is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste.

Additional support
If you have any questions relating to the use of the products described in this manual and do
not find the answers in this document, please contact your local Siemens representative or
office nearest to you on the Internet (http://www.automation.siemens.com/partner/).
A guide to the technical documentation for the various SIMATIC products and systems is
available on the Internet. (http://www.siemens.com/simatic-tech-doku-portal)
The online catalog and ordering system are available on the Internet
(http://www.siemens.com/automation/mall).

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

4 Manual, 10/2015, A5E01001711-AB
 Preface
1.1 Preface

Training center
We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation
system. Please contact your regional training center or the central training center in D-
90327, Nuremberg, Germany on the Internet (http://www.siemens.com/sitrain).

Technical Support
You can reach Technical Support for all industry automation products via the support request
Web form on the Internet (http://www.siemens.com/automation/support-request).
Additional information about Siemens Technical Support is available on the Internet
(http://www.siemens.com/automation/service).

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base on the Internet
(http://www.siemens.com/automation/service&support).
There you will find:
● Our Newsletter, which constantly provides you with the latest information about your
products.
● The right documentation for you using our Service & Support search engine.
● The bulletin board, a worldwide knowledge exchange for users and experts.
● Your local contact for Automation & Drives in our contact database.
● Information about on-site services, repairs, spare parts, and lots more.

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Manual, 10/2015, A5E01001711-AB 5
Properties 2
2.1 4DO DC24V/2A ST digital electronic module
(6ES7132-4BD32-0AA0)

Properties
● Digital electronic module with four outputs
● Output current per output 2 A
● Rated load voltage 24 V DC
● Short-circuit protection
● Suitable for solenoid valves, DC contactors, and indicator lights

Special feature
When the rated load voltage 24 V DC is applied to the power module via a mechanical
contact, the digital outputs carry a "1" signal for about 25 μs for switching reasons. You have
to take this into consideration if you use this module in connection with high-speed counters.

General terminal assignment

Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.

Terminal assignment for 4DO DC24V/2A ST (6ES7132-4BD32-0AA0)

Terminal Allocation Terminal Allocation Notes
1 DO0 5 DO1 • DOn: Output signal, channel n
2 DO2 6 DO3 • M: Mass
3 M 7 M • AUX1: Protective-conductor terminal or potential bus (freely usable
4 M 8 M up to 230 VAC)
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

6 Manual, 10/2015, A5E01001711-AB
 Properties
2.1 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Usable terminal modules

Usable terminal modules for 4DO DC24V/2A ST (6ES7132-4BD32-0AA0)

TM-E15C26-A1 TM-E15C24-A1 TM-E15C24-01 TM-E15C23-01
(6ES7193-4CA50- (6ES7193-4CA30- (6ES7193-4CB30- (6ES7193-4CB10- Spring terminal
0AA0) 0AA0) 0AA0) 0AA0)
TM-E15S26-A1 TM-E15S24-A1 TM-E15S24-01 TM-E15S23-01
(6ES7193-4CA40- (6ES7193-4CA20- (6ES7193-4CB20- (6ES7193-4CB00- Screw-type terminal
0AA0) 0AA0) 0AA0) 0AA0)
TM-E15N26-A1 TM-E15N24-A1 TM-E15N24-01 TM-E15N23-01
(6ES7193-4CA80- (6ES7193-4CA70- (6ES7193-4CB70- (6ES7193-4CB60- Fast Connect
0AA0) 0AA0) 0AA0) 0AA0)

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Manual, 10/2015, A5E01001711-AB 7
Properties
2.1 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Block diagram

Figure 2-1 Block diagram 4DO DC24V/2A ST

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

8 Manual, 10/2015, A5E01001711-AB
 Properties
2.1 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Technical specifications for 4DO DC24V/2A ST (6ES7132-4BD32-0AA0)

Dimensions and weight

Dimensions W × H × D (mm) 15 × 81 × 52
(Total dimensions depend on the terminal mod-
ule selected)
Weight Approx. 40 g
Module-specific data
Supports isochronous operation Yes
Number of outputs 4
Cable length
• Unshielded Max. 600 m

• Shielded Max. 1000 m

Parameter length 1 byte

Address space 1 byte
Address space (packed) 4 bits
Voltages, currents, potentials
Rated Rated load voltage L+ (from power mod- 24 V DC
ule)
• Polarity reversal Yes 1

Total current of the outputs (per module) 4A

Electrical isolation
• Between the channels No

• Between the channels and backplane bus Yes

Permissible potential difference

• Between different circuits 75 V DC / 60 V AC

Isolation tested 500 V DC

Current consumption
• From the rated load voltage L+ (no load) Max. 10 mA per channel

Power loss of the module Typically 1.6 W

Status, interrupts, diagnostics
Status display Green LED per channel
Diagnostics functions No
Actuator selection data
Output voltage
• At signal "1" Min. L+ (-1 V)

Output current
• At signal "1"
– Rated value 2A
7 mA to 2.4 A
– Permissible range

• At "0" signal (residual current) Max. 0.1 mA

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Manual, 10/2015, A5E01001711-AB 9
Properties
2.1 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Output delay (with resistive load)

• At "0" to "1" Max. 50 µs
typically 45 µs
• At "1" to "0" Max. 120 µs
typically 90 µs
Load resistance range 12 Ω to 3.4 kΩ
Lamp load Max. 10 W
Parallel switching of 2 outputs
• For redundant control of a load Yes (per module)

• For increased performance No

Control of a digital input Yes

Switching frequency
• With resistive load Max. 1 kHz

• With inductive load 2 Hz (0.5 H)

• With lamp load 10 Hz

Limiting (internal) of inductive shut-down volt- Typ. L+ (-55 to -60 V)

age
Reverse-voltage proof Yes, if using the same load voltage as at the pow-
er module
Short-circuit protection of the output Yes 2
• Response threshold Typically 2.8 to 7.2 A
1 Polarity reversal can lead to the digital outputs being switched through.
2 per channel

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

10 Manual, 10/2015, A5E01001711-AB
Diagnostics 3
3.1 Diagnostics using LED display

LED display

① Status display for input status (green)

Status and error displays

Event (LEDs) Cause Solution

1 5 2 6
On Input value at channel 0 —
On Input activated at channel 1. —
On Input activated at channel 2. —
On Input activated at channel 3. —

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

Manual, 10/2015, A5E01001711-AB 11
Index

D
Digital Electronic module 4DO DC24V/2A ST
Block diagram, 8
Properties, 6
Technical specifications, 9
Terminal assignment, 6

L
LED display, 11

4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

12 Manual, 10/2015, A5E01001711-AB