LECTURE 1

WORK STUDY

Definition: Work study may be defined as the analysis of a job for the purpose of finding the preferred method of doing it
and also determining the standard time to perform it by the preferred (or given) method. Work study, therefore, comprises
of two areas of study: method study (motion study) and time study (work measurement).

Role of Work Study in Improving Productivity

In order to understand the role of work study, we need to understand the role of method study and that of time study.

Method study (also sometimes called Work Method Design) is mostly used to improve the method of doing work. It is
equally applicable to new jobs. When applied to existing jobs and existing jobs, method study aims to find better methods
of doing the jobs that are economical and safe, require less human effort, and need shorter make-ready / put-away time.
The better method involves the optimum use of best materials and appropriate manpower so that work is performed in
well organized manner leading to increased resource utilization, better quality and lower costs.

It can therefore be stated that through method study we have a systematic way of developing human resource
effectiveness, providing high machine and equipment utilization, and making economical use of materials.

Time study, on the other hand, provides the standard time, that is the time needed by worker to complete a job by the
standard method. Standard times for different jobs are necessary for proper estimation of

 manpower, machinery and equipment requirements

 daily, weekly or monthly requirement of materials
 production cost per unit as an input to better make or buy decision
 labor budgets
 worker's efficiency and make incentive wage payments.

By the application of method study and time study in any organization, we can thus achieve greater output at less cost and
of better quality, and hence achieve higher productivity.

Work Study and Ergonomics

The work study and the ergonomics are the two areas of study having the same objective: design the work system so that
for the operator it is safe, and the work is less fatiguing and less time taking.

Historical Developments

The Work of Taylor

Frederick W. Taylor is generally considered to be the founder of modern method and time study, although time studies
were conducted in Europe many years before Taylor 's time. In 1760, Jean Rodolphe Perronet, a French engineer, made
extensive time studies on the manufacture of No. 6 common pins.

Taylor began his time study work in 1881 while associated with the Midvale Steel Company in U.S.A.. He evolved a
system based on the ―task‖, and proposed that the work of each employee be planned out by the management in advance.
Each job was to have a standard time, deter mined by time studies made by experts. In the timing process, Taylor
advocated dividing the work into small divisions of effort known as "ele ments." Experts were to time these individually
and use their collective values to determine the allowed time for the task.

Early presentations of Taylor 's findings were received with little enthusiasm, because many interpreted his findings to be
somewhat new piece-rate system rather than a technique for analyzing work and improving methods. Both management
and employees were skeptical of piece rates, because many standards were earlier typically based on the supervisor's
guess or even sometimes inflated by bosses to protect the performance of their departments.

In June 1903, at the American Society of Mechanical Engineers meeting, Taylor presented his famous paper, "Shop
Management," which included the elements of scientific management: time study, standardization of all tools and tasks,
use of a planning department, use of slide rule and similar timesaving implements, instruction cards for workers, bonuses
for successful per formance, differential rates, mnemonic systems for classifying products, routing systems, and modern
cost systems. Taylor 's techniques were well received by many factory managers, and by 1917, of 113 plants that had
installed "scientific manage ment," 59 considered their installations completely successful, 20 partly successful, and 34
failures.

In 1898, while at the Bethlehem Steel Company , Taylor carried out the pig-iron experiment that became the most
celebrated demonstrations of his principles. He established the correct method, along with financial incentives, and
workers carrying 92-pound pigs of iron up a ramp onto a freight car were able to increase their productivity from an
average of 12.5 tons per day to between 47 and 48 tons per day. This work was performed with an increase in the daily
rate of $1.15 to $1.85. Taylor claimed that workmen per formed at the higher rate "without bringing on a strike among the
men, without any quarrel with the men and were happier and better contented."

Another of Taylor 's Bethlehem Steel studies that became famous was on shovel ing work. Workers who shoveled at
Bethlehem would use the same shovel for any job—lifting heavy iron ore to lifting light rice coal. Taylor designed
shovels to fit the different loads: short- handled shovels for iron ore, long-handled scoops for light rice coal, and showed
their usefulness in improving productivity.

Not as well known as his engineering contributions is the fact that in 1881, he was a U.S. tennis doubles champion. Here
he used an odd-looking racket he had designed with a spoon curved handle.

The Work of Gilbreths

Frank and Lilian Gilbreth are considered as the founders of the modern motion study technique, which may be defined as
the study of the body motions used in performing an oper ation, for the purpose of improving the operation by eliminating
unnecessary motions, simplifying necessary motions, and then establishing the most favorable motion sequence for
maximum efficiency. Frank Gilbreth originally implemented ideas into the bricklayer's trade in which he was employed.
After introducing meth ods improvements through motion study, including an adjustable scaffold that he had invented, as
well as operator training, he was able to increase the average num ber of bricks laid from 120 to 350 per worker per hour.

More than anyone else, the Gilbreths were responsible for industry's recogni tion of the importance of a detailed study of
body motions to arrive at the best method of performing an operation that would increase production, reduce operator
fatigue. They developed the technique of filming motions for study, known as micromotion study.

The Gilbreths also developed the cyclegraphic and chronocyclegraphic analysis techniques for studying the motion paths
made by an operator. The cycle- graphic method involves fixing small electric light bulb to the finger or part of the body
being studied and then photographing the motion while the operator is performing the operation. The resulting picture
gives a permanent record of the motion pattern employed and can be analyzed for possible improvement. The chrono-
cyclegraph is similar to the cyclegraph, but its electric circuit is interrupted regularly, causing the light to flash. Instead of
showing solid lines of the motion patterns, the resulting photograph shows short dashes of light spaced in proportion to
the speed of the body motion being photographed. Consequently, with the chronocyclegraph it is possible to determine
direction and compute velocity, acceleration, and deceleration, in addition to study of body motions.

The Work of Others

Carl G. Barth, an associate of Frederick W. Taylor, developed a production slide rule for estimating the most efficient
combinations of speeds and feeds for cutting metals of various hardnesses, considering the depth of cut, size of tool, and
life of the tool. He is also known for his work on estimation of allowances by establishing the number of foot-pounds of
work a worker could do in a day. He developed a relationship in which a certain push or pull on a worker's arms was
equated with the amount or weight that worker could handle for a certain percentage of the day.
Harrington Emerson applied scientific methods to work on the Santa Fe Railroad and wrote a book, Twelve Principles of
Efficiency, in which he made an attempt to lay down procedures for efficient operation. He reorganized the company,
integrated its shop procedures, installed standard costs and a bonus plan, and introduced Hollerith tabulating machines for
the accounting work. This effort resulted in annual saving of $ 1.5 million and recognition of his approach,
called efficiency engineering .

In 1917, Henry Laurence Gantt developed simple graph that would present performance while visually showing projected
schedules. This production control tool was adopted by the shipbuilding industry during World War I. For the first time,
this tool demonstrated the possibility of comparing actual performance against the original plan, and to adjust daily
schedules in accordance with capacity, back log, and customer requirements. Gantt is also known for his wage payment
system that rewarded workers for above-standard performance, eliminated any penalty for failure, and offered the boss a
bonus for every worker who per formed above .standard. Gantt advocated human relations and promoted scientific
management in the back drop of an inhuman "speedup" of labor.

Motion and time study received added stimulus during World War II when Franklin D. Roosevelt, through the U.S.
Department of Labor, attempted to establish standards for increasing production. The stated policy advocated greater pay
for greater output but without an increase in unit labor costs, incentive schemes to be collectively bargained between labor
and management, and the use of time study for setting production standards.

LECTURE 2

METHOD STUDY

Method study, aims to achieve the better method of doing work, and for this reason method study is sometimes called
Work Method Design.

Definition: Method study can be defined as the procedure for systematic recording, analysis and critical examination of
existing or proposed method of doing work for the purpose of development and application of easier and more effective
method.

Method Study Procedure

The following general steps describe the procedure for making a method study.

1. Select the job – on which method study is to be applied.

2. Obtain information and record.
3. Examine the information critically.
4. Develop the most practical, economical and effective method by considering real limitations of the situation.
5. Install the new method as standard practice.
6. Maintain the standard practice by regular follow up.

Let us consider these steps in some detail.

Selection of Job for Method Study

Practically, any activity or a job is a potential project for improvement but as the work study engineer is to sell his ideas
and maintain his existence in the organization, he should always attempt to select those jobs for improvement which are
unpopular among employees or are considered ―dirty‖ by them.

By improving such jobs, he would earn goodwill from the employees as well as the management, and can expect their full
cooperation for other studies in the future.

Considerations may be given to the following factors while selecting a job for method study

• Economic Factors
• Technical Factors

• Human Factors

Economic Factors:

If the economic importance of a job is small, it is not wise to start or continue a long study. Priorities should be given to
those types of job which offer greater potential for cost reduction. Such jobs are easily identifiable, as they have

• High labour content, i.e. they consume more time

• excessive machine or man idleness

• higher frequency of occurrence, i.e. they have large demand

• bottlenecks in production line

• higher proportion of accidents

• movement of material or men over long distance

• high scrap and reprocessing costs

• high payment of overtime bills.

Technical Factors: The method study engineer must have the necessary technical knowledge about the job to be studied.
Only surface knowledge about the subject may not lead to the right solution to the real problem. To illustrate, consider
that a particular machine tool in proving bottleneck. The output from this machine is not reaching the assembly line in the
required quantity. Through a preliminary study, it is found that it is running at lower speed and feed than that
recommended for the pair of work and tool material used. Just increase in speed or feed may not be the solution of this
problem. It may be possible that the machine itself is not rigid enough to operate at higher speeds or take a deeper cut. Just
increase in speed may increase the output but the quality of job may be seriously affected. Technical expertise in machine
tools and metal cutting process would be essential to solve problem of this kind.

Human Factors: Emotional reaction of the workers to the method study and changes in method are important
considerations. If the study of a particular job is suspected to cause unrest or ill feeling, it should not be undertaken,
however useful it may be from the economic point of view. It is always better to take up first those jobs which are
considered ‗dirty', unsafe, unpleasant, boring, or highly fatiguing, and improvements brought about as a result of method
study. This would possibly ensure cooperative from the workers for the other jobs as well.

After it is recognized that a problem exists, the first step is to properly formulate it. From the general statements like
―Costs are too high―, ―Increase the production‖, ―Reduce shop floor accidents‖, it is necessary to determine just what the
real problem is. After it is ascertained that the problem merits consideration, it is decided whether this is the proper time to
solve it, and how much time can be spent in solving it. The problem may then be defined broadly giving minimum
constraints at this stage, as it will permit the use of imagination and creativity in finding a solution. It may sometimes be
desirable to divide the complete problem into a couple of small problems and solve them.

LECTURE 3

INFORMATION COLLECTION AND RECORDING

Information Collection Techniques:

The accuracy of data about the method study problem is important for the development of improved method. The
following techniques are used for the collection of information / data about the task under consideration. These are not
exclusive of each other, and for any particular method study problem, some or all the techniques may be employed.

• Observation. It is a common technique used for collecting information about the present method or the existing
problem. The method study person visits the site where the work is currently being done and observes various steps in the
method being followed. There are many instances where all the data needed is obtained by only observing the work or
work site.

• Discussion. Discussion with those who do or who supervise the work can frequently provide information not obtainable
by observation. The discussion technique is commonly used where irregular work is involved or where one is trying to
analyze past work in order to improve efficiency of work to be done in future.

Even where observation by itself may accomplish the data collection task, discussion may be used for developing good
human relations.

• Records. Valuable information can be obtained from past records concerning production, cost, time, inventory and sub-
contracts. For certain type of information concerning the past practice, sometimes this is the only way to obtain authentic
data.

• Motion Pictures or video Films. Accurate and most detailed information can be obtained by taking motion pictures or
video film. Information obtained by this procedure can easily be transmitted / forwarded to all levels in the organization
and if needed, can be used directly for training purposes. The film can be used to focus attention at particular point or
motion in an operation. For obtaining information concerning those types of work that involve large crew size, it is
probably the only procedure.

Information Recording Techniques:

There are three main types of information recording techniques. These are

• Process Charts

• Diagrams

• Templates

A Process Chart is a graphic means of representing the activities that occur during a manufacturing or servicing job.

There are several types of process charts. These can be divided into two groups.

(i) Those which are used to record a process sequence (i.e. series of events in the order in which they occur) but do not
depict the events to time scale.

Charts falling in this group are

• Operation process chart

• Flow process chart – (man / material / equipment type)

• Operator chart (also called Two Handed Process Chart)

(ii) Those which record events in the sequence in which they occur on a time scale so that the interaction of related events
can be more easily studied. Charts falling in this group are
• Multiple activity chart

• Simo chart

Diagrams. A diagram gives pictorial view of the layout of workplace or floor on which locations of different equipment,
machines, etc. are indicated. The movement of subject (man or material) is then indicated on the diagram by a line or a
string. The diagrams are valuable in highlighting the movement so that analyst can take steps to simplify or reduce it and
thus effect saving in time or reduction in collisions / accidents.

Two types of diagrams are common: Flow diagram and string diagram.

Templates and 3-D models:

Two-dimensional cut outs made from thin card sheet representing machinery, furniture, etc. can be used for developing
new layouts and methods. The templates may have pieces of permanent magnet attached to them, so that when used on
iron board; they remain glued on the board whenever placed.

A scaled 3-D model of a working area helps easy understanding of lighting, ventilation, maintenance and safety aspects
that may be important in a method. Such models are often of great value in demonstrating the advantages of the proposed
changes to all concerned. However, their use is limited because of higher cost involved. Some computer software‘s are
available which help in constructing the layout and possibility of visualizing the working of process in a systematic way.

Before taking up descriptions of these charts or diagrams, it is necessary to know the various elements of work.

Elements of Work:

There are five basic elements of work: Operation, Inspection, Transportation, Delay, and storage. Table gives the
definitions and symbols by which these elements are represented. Also given in the Table are examples of each element.

Sometimes, more than one element occur simultaneously. It is shown as combined element with combined symbol.
Examples are ―Operation in combination will inspection‖, and ―Inspection in combination with Transportation‖.

Operation Process Chart:

An operation process chart provides the chronological sequence of all operations and inspections that occur in a
manufacturing or business process. It also shows materials used and the time taken by operator for different elements of
work. Generally a process chart is made for full assembly, that is, it shows all the operations and inspections that occur
from the arrival of raw material to the packaging of the finished product.

Flow Process Chart:

A flow process chart is used for recording greater detail than is possible in an operation process chart. It is made for each
component of an assembly rather than for the whole assembly.

A flow process chart shows a complete process in terms of all the elements of work. There are two main types of flow
charts: product or material type , and the operator type . The product type records the details of the events that occur to a
product or material, while the operator flow chart details how a person performs an operational sequence.

An important and valuable feature of this chart is its recording of non-productive hidden costs, such as delays, temporary
storages, unnecessary inspections, and unnecessary long distances traveled. When the time spent on these non productive
activities is highlighted, analyst can take steps to minimize it and thus reduce costs.

Operator Process Chart :

It is also called Left Hand – Right Hand chart and shows the activities of hands of the operator while performing a task. It
uses four elements of hand work: Operation, Delay (Wait), Move and Hold. Its main advantage lies in highlighting un-
productive elements such as unnecessary delay and hold so that analyst can take measures to eliminate or shorten them.

Multiple Activity Chart:

Worker-Machine process chart and gang process chart fall in the category of multiple activity charts. A worker-machine
chart is used for recording and analyzing the working relationship between operator and machine on which he works. It is
drawn to time scale. Analysis of the chart can help in better utilization of both worker and machine time. The possibility
of one worker attending more than one machine is also sought from the use of this chart.

A gang process chart is similar to worker-machine chart, and is used when several workers operate one machine. The
chart helps in exploring the possibility of reducing both the operator time and idle machine time.

Simo Chart:

A Simo chart is another Left-Hand Right-Hand chart with the difference that it is drawn to time scale and in terms of basic
motions called therbligs. It is used when the work cycle is highly repetitive and of very short duration.

Lecture 4

CRITICAL EXAMINATION

Critical examination of the information recorded about the process in charts / diagrams is the most important phase of the
method study. In this, each element of the work, as presently being done and recorded on the chart is subjected to a
systematic and progressive series of questions with the purpose of determining true reasons for which it is done. Based on
the reasons, improvements are found and adopted into a new method, called better method. This examination, thus
requires exhaustive collaboration with everyone whose contribution can prove useful, and also full use of all available
sources of technical information. The use of questioning technique reduces the possibility of missing any information
which may be useful for the development of better method.

A popular procedure of carrying out critical examination uses two sets of questions: Primary questions (answers to these
show up the necessity of carrying out the activity), and Secondary questions (answers to these allow considerations to
alternative methods of doing the activity). Selection of the best way of doing each activity is later determined to develop
new method which is introduced as a standard practice.

A general-purpose set of primary and secondary questions is given below:

Primary Questions:

1. Purpose. The need of carrying out the activity is challenged by the questions-What is achieved? Is it necessary? Why?

The answers to these questions determine whether the particular activity will be included in the proposals of new method
for the process.

2. Means. The means of carrying out the activity are challenged by the questions- 'How is it done?' and 'Why that way'?

3. Place. The location of carrying out the activity is challenged by the questions- 'Where is it done'? and 'Why there'?

4. Sequence. The time of carrying out the activity is challenged by the questions- 'When is it done'? and 'Why then'?

5. Person. The level of skill and experience of the person performing the activity is challenged by the questions- 'Who
does it'? and 'Why that person'?
The main object of the primary questions is to make sure that the reasons for every aspect of the presently used method
are clearly understood. The answers to these questions should clearly bring out any part of the work which is unnecessary
or inefficient in respect of means, sequence, person or place.

Secondary Questions:

The aim of secondary questions is to arrive at suitable alternatives to the presently used method:

1. Purpose. If the answer to the primary question 'Is the activity necessary"? is convincingly 'Yes', alternatives to achieve
the object of carrying nut the activity are considered by the question— 'What else could be done'?

2. Means. All the alternative means to achieve the object are considered by the question— 'How else could it be done'?

3. Place. Other places for carry ing out the activity are considered by the question— 'Where else could it be done'?

4. Sequence. The secondary question asked under this heading is— 'When else could it be clone'?

5. Person. The possibilities for carrying out the activity by other persons are considered by asking the question- 'Who else
should do it' ?

This phase involves the search of alternative possibilities within the imposed restrictions of cost, volume of production,
and the like. For this the method study man uses his own past experience with same or similar problems or refers to text
books, handbooks, etc.

The answers to the following questions are then sought through evaluation of the alternatives.

'What should be done'?

'How should it be done'?

'Where should it be done'?

'When should it be done'? and

'Who should do it'?

These answers form the basis of the proposals for the improved method. The evaluation phase requires the work study
man to consider all the possibilities with respect to the four factors—economic, safety, work quality and human factors—
the economic factor being the most important in most situations.

Economic considerations to any alternative refer to determination of 'How much will it cost'? and 'How much will it save'?
The purpose of evaluating safety factor is to ensure that the alternative selected shall not make the work less safe. The
evaluation of quality factor shall determine whether the alternative selected shall make for better product quality or quality
control.

And lastly human factors considerations shall ensure that the new method will be interesting, easy to learn, safe, less
monotonous and less fatiguing to the operator.

Figure shows a sample sheet used for critical examination the use of which can be quite helpful in this phase of method
study.

LECTURE 5

DEVELOPING BETTER METHOD:

With the present method or procedure for the job in mind, the application of ‗critical analysis' highlights the essential part
of the job, for which alternative ways for its carrying out are developed .

When developing alternative ways for doing a task the following may be considered.

• Where and how to use ‗man' in the process?

• What better work procedure be adopted?

• What better equipment be used?

• What better layout of work station, shop or factory be used?

In deciding whether a particular element of work (operation, inspection, or transportation) be carried out manually or with
the help of a device, method study engineer must be well aware of things which man cannot do or does in inferior fashion
than machine. Examples of such things are:

a. Exert large amount of force, as needed in metal cutting.

b. Exert force precisely or smoothly at a fixed rate as needed in metal forming.
c. Do high speed computations of complex nature.
d. Perform repetitive tasks without suffering from side effects like boredom, fatigue, etc.
e. Move at high speeds for hours together.
f. Carry out several tasks simultaneously.
g. Respond fast to frequently changing control signals.
h. Perform satisfactorily in an environment where conditions relating to cold, heat, noise, dampness, etc. are
extreme.

In contrast, machines prove inferior generally when for carrying out a task it is necessary to

a. Think creatively or inductively

b. Learn
c. Generalize
d. Cope will unexpected events.

In most cases, the relative roles of man and machine vary from one extreme end in which entire process is manual to the
other extreme in which the process is completely mechanized with the presence of man only for monitoring, trouble
shooting, maintenance, and the like.

Man is readily available and extremely flexible tool, who has the capability of doing a large number and type of tasks with
learning and practice that is generally less expensive than the cost of creating devices for the same purpose. Man is
therefore considered a strong competitor for low, medium and even some high volume production tasks.

When an activity is decided to be carried out manually, the best work procedure is determined by considering the
principles of Motion Economy.

Equipped will the various alternative ways of carrying out essential elements of task, method study engineer has now to
choose the best alternative method. He decides upon the criteria, which may be additional fixed costs involved, running
cost, production rate, operator's fatigue, operator learning time, and the like. The weight to each criterion is fixed and
performance is predicted of each alternative with respect to each criteria. The one which gets the maximum points is
selected for adoption as a standard method.

Detailed specifications of this method are prepared with the description of procedure, workplace layout and
material/equipment to be used. This is important for

• Communication of the proposed work method to those responsible for its approval
• Communication of the proposed method to those concerned with its installation, for example instructors and supervisors
who are actually responsible for instructions to operators and setting up the machinery and work place layouts.

• Official record of the work method.

Installation of Improved Method:

When the proposals of the improved method for a job are approved by the management of the company, the next step is to
put this method into practice. Installation of method requires necessary prior preparation for which the active support of
everyone concerned is very important.

The activities of the installation phase include:

1. Gaining acceptance of the change by the workers involved and their representatives. The method change may affect the
routine and paper work of wages, costs, planning, and even purchase department. It may require displacement of staff
from one section to another of the organisation. Adjustments of this type need to be carried out very carefully so that the
least possible hardship or inconvenience is caused.

2. Retraining the workers. The extent to which workers need retraining will depend on the nature of the job and the
changes involved. It is much more for those jobs which have a high degree of manual dexterity and where the workers
have been doing the work by traditional methods. The use of films demonstrating the advantages of new method as
compared to traditional one are often very useful in retraining the workers.

3. Arranging the requirements of the new method. This involves -

(i) arranging the necessary plant, tools and equipment at all the workplaces,

(ii) arranging building-up of necessary stocks of new raw materials, and running-down of old stocks,

(iii) checking up the availability and continuity of all supplies and services, and

(iv) arranging any clerical records which may be required for purposes of control and comparison.

4. Taking other necessary actions. These will depend upon situation to situation. For example, if changes in working hours
are involved, necessary instructions should be passed on to auxiliary services such as transport, canteen, water supply, etc.
If change in wages is involved, information concerning the date of installation must reach the costing department.
Necessary instructions should be passed on to every one concerned about the time table for the installation of the change
in method.

5. Giving a trial run to the new method. It is important that all departments affected by the change are represented at the
rehearsal. It is often advantageous to conduct the rehearsal while the old method is still operating. It should usually take
place outside normal working hours; say at week-end or at holiday time so that there is no interference with normal
production. The suggestions for minor variations in the proposed method if they are worth while and cost effective should
be accepted and incorporated.

It is obvious that the method analyst has to be extra tactful and keep restraint throughout the period of installation. The
installation is considered complete when the new method starts running smoothly.

Follow-up:

The work of method study man is not complete with the installation of the improved method; the maintenance of the new
method in its specified form is also part of his activities. The main aim of maintenance of the new method is to ensure that
the workers do not slip back into old method, or introduce elements which are not part of the proposed method.
For effective maintenance it is important to define and specify the new method very clearly. An operator chart giving
adequate details of the tools, equipment, and workplace layout and operator-motion pattern is often helpful.

The workers have tendencey to drift away from the method laid down. The purpose of the method-maintenance is to
check this tendency. But if it is found that the change from the method specified is in fact an improvement which can be
made in the method, this should be officially incorporated.

LECTURE 6

MOTION STUDY

Motion study is a technique of analyzing the body motions employed in doing a task in order to eliminate or reduce
ineffective movements and facilitates effective movements. By using motion study and the principles of motion economy
the task is redesigned to be more effective and less time consuming.

The Gilbreths pioneered the study of manual motions and developed basic laws of motion economy that are still relevant
today. They were also responsible for the development of detailed motion picture studies, termed as Micro Motion
Studies, which are extremely useful for analyzing highly repetitive manual operations. With the improvement in
technology, of course, video camera has replaced the traditional motion picture film camera.

In a broad sense, motion study encompasses micro motion study and both have the same objective: job simplification so
that it is less fatiguing and less time consuming. While motion study involves a simple visual analysis, micro motion study
uses more expensive equipment. The two types of studies may be compared to viewing a task under a magnifying glass
versus viewing the same under a microscope. The added detail revealed by the microscope may be needed in exceptional
cases when even a minute improvement in motions matters, i.e. on extremely short repetitive tasks.

Taking the cine films @ 16 to 20 frames per second with motion picture camera, developing the film and analyzing the
film for micro motion study had always been considered a costly affair. To save on the cost of developing the film and the
cost of film itself, a technique was used in which camera took only 5 to 10 frames per minute. This saved on the time of
film analysis too. In applications where infrequent shots of camera could provide almost same information, the technique
proved fruitful and acquired the name Memo Motion Study.

Traditionally, the data from micro motion studies are recorded on a Simultaneous Motion (simo) Chart while that from
motion studies are recorded on a Right Hand - Left Hand Process Chart.

Therbligs

On analysing the result of several motion studies conducted, Gilbreths concluded that any work can be done by using a
combination of some or all of 17 basic motions, called Therbligs (Gilbreth spelled backward). These can be classified as
effective therbligs and ineffective therbligs. Effective therbligs take the work progress towards completion. Attempts can
be made to shorten them but they cannot be eliminated. Ineffective therbligs do not advance the progress of work and
therefore attempts should be made to eliminate them by applying the Principles of Motion Economy. Table gives different
therbligs along with their symbols and descriptions.

SIMO Chart

It is a graphic representation of an activity and shows the sequence of the therbligs or group of therbligs performed by
body members of operator. It is drawn on a common time scale. In other words, it is a two-hand process chart drawn in
terms of therbligs and with a time scale, see Figure.

Making the Simo Chart. A video film or a motion picture film is shot of the operation as it is carried out by the operator.
The film is analyzed frame by frame. For the left hand, the sequence of therbligs (or group of therbligs) with their time
values are recorded on the column corresponding to the left hand. The symbols are added against the length of column
representing the duration of the group of therbligs. The procedure is repeated for the right hand and other body members
(if any) involved in carrying out the operation.
It is generally not possible to time individual therbligs. A certain number of therbligs may be grouped into an element
large enough to be measured as can be seen in Figure.

Uses of Simo Chart

From the analysis shown about the motions of the two hands (or other body members) involved in doing an operation,
inefficient motion pattern can be identified and any violation of the principle of motion economy can be easily noticed.
The chart, therefore, helps in improving the method of doing an operation so that balanced two-handed actions with
coordinated foot and eye motions can be achieved and ineffective motions can be either reduced or eliminated. The result
is a smoother, more rhythmic work cycle that keeps both delays and operator fatigue to the minimum extent.

LECTURE 7

CYCLE GRAPH AND CHRONO CYCLE GRAPH

These are the techniques of analyzing the paths of motion made by an operator and were originally developed by the
Gilbreths. To make a cycle graph , a small electric bulb is attached to the finger, hand, or any other part of the body whose
motion is to be recorded. By using still photography, the path of light of bulb (in other words, that of the body member) as
it moves through space for one complete cycle is photographed. The working area is kept relatively less illuminated while
photograph is being taken. More than one camera may be used in different planes to get more details. After the film is
developed, the resulting picture (cycle graph) shows a permanent record of the motion pattern employed in the form of a
closed loop of white continuous line with the working area in the background. A cycle graph does not indicate the
direction or speed of motion.

It can be used for

 Improving the motion pattern, and

 Training purposes in that two cycle graphs may be shown with one indicating a better motion pattern than the
other.

The chrono cycle graph is similar to the cycle graph, but the power supply to the bulb is interrupted regularly by using an
electric circuit. The bulb is thus made to flash. The procedure for taking photograph remains the same. The resulting
picture (chrono cycle graph), instead of showing continuous line of motion pattern, shows short dashes of line spaced in
proportion to the speed of the body member photographed. Wide spacing would represent fast moves while close spacing
would represent slow moves. The jumbling of dots at one point would indicate fumbling or hesitation of the body
member. A chrono cycle graph can thus be used to study the motion pattern as well as to compute velocity, acceleration
and retardation experienced by the body member at different locations. Figures show a cycle graph and a chrono cycle
graph.

The world of sports has extensively used this analysis tool, updated to video, for the purpose of training in the
development of form and skill.

Principles of Motion Economy:

These principles can be considered under three different groups.

• Those related to the use of the human body.

• Those related to the workplace arrangement, and

• Those related to the design of tools and equipment.

1. Principles related to the use of human body:

(i) Both hands should begin and end their basic divisions of activity simultaneously and should not be idle at the same
instant, except during the rest periods.

(ii) The hand motions should be made symmetrically and simultaneously away from and toward the centre of the body.

• Momentum should be employed to assist the worker wherever possible, and it should be reduced to a minimum if it
must be overcome by muscular effort.

• Continuous curved motions should be preferred to straight line motions involving sudden and sharp changes in the
direction.

• The least number of basic divisions should be employed and these should be confined to the lowest practicable
classifications. These classifications, summarized in ascending order of time and fatigue expended in their performance,
are:

• Finger motions

• Finger and wrist motions.

• Finger, wrist, and lower arm motions.

• Finger, wrist, lower arm, and upper arm motions.

• Finger, wrist, lower arm, upper arm motions and body motions.

• Work that can be done by the feet should be arranged so that it is done together with work being done by the hands. It
should be recognized, however, that it is difficult to move the hand and foot simultaneously.

• The middle finger and the thumb should be used for handling heavy loads over extended periods as these are the
strongest working fingers. The index finger, fourth finger, and little finger are capable of handling only light loads for
short durations.

• The feet should not be employed for operating pedals when the operator is in standing position.

• Twisting motions should be performed with the elbows bent.

• To grip tools, the segment of the fingers closed to the palm of the hand should be used.

2. Principles related to the arrangement and conditions of workplace:

• Fixed locations should be provided for all tools and materials so as to permit the best sequence and
eliminate search and select .

• Gravity bins and drop delivery should be used to reduce reach and move times. Use may be made of ejectors for
removing finished parts.

• All materials and tools should be located within the normal working area in both the vertical and horizontal plane (
see Figure ), and as close to the point of use as possible.

• Work table height should permit work by the operator in alternately sitting and standing posture.

• Glare-free adequate illumination, proper ventilation and proper temperature should be provided.
• Dials and other indicators should be patterned such that maximum information can be obtained in minimum of time and
error.

3. Principles related to the design of tools and equipment:

• Use colour, shape or size coding to maximize speed and minimize error in finding controls.

• Use simple on/off, either/or indicators whenever possible. If simple on/off indicator is not sufficient, use qualitative type
indicator, and use quantitative type indicator only when absolutely essential.

• All levers, handles, wheels and other control devices should be readily accessible to the operator and should be designed
so as to give the best possible mechanical advantage and utilize the strongest available muscle group. Their direction of
motion should conform to stereo-typed reactions.

• Use quick acting fixture to hold the part or material upon which the work is being performed.

• Use stop guides to reduce the control necessary in positioning motions.

• Operating, set-up and emergency controls should be grouped according to the function.

Design of Workplace Layout

The design of workplace layout involves the following

 Determination of work surface height

 Design of operator chair (if work is to be done in sitting posture), or allowing the use of antifatigue mats for
standing operator
 Determination of location of tools, materials, controls, displays and other devices.

We shall consider these briefly.

Work Place Height

This should be decided from the standpoint of comfortable working posture for the operator. Generally, it is equal to the
elbow height of operator whether work is done in standing or sitting posture. However, for work involving lifting of heavy
parts, it is useful to lower the work surface height by as much as 20 cm. This would reduce the fatigue to the trunk of
operator. Similarly, it may be useful to raise the work surface height when work involves visual examination of minute
details of fine parts. This would reduce the eye fatigue to the operator. Alternatively, the work surface may be inclined by
15 degrees or so. Work surface height may also be made adjustable in situations where operator is permitted to do work in
alternatively sitting and standing postures.

Design of Operator Chair

A seated posture is better than standing posture from the standpoint of stress reduction on the feet and the overall energy
expenditure. A well-designed seat should

 Provide trunk stabilization so that a good posture is maintained,

 Permit change of posture, and
 Not unduly press the thigh tissues.

This requires the use of ergonomic considerations and anthropometric dimensions of operator so that appropriate
dimensions are chosen for the following features of chair

(i) Seat Height

(ii) Seat Depth

(iii) Seat Width

(iv) Seat Inclination

(v) Arm Rests

(vi) Back Rest

(vii) Foot Rest

It is necessary to provide adjustability, particularly with respect to seat height, in order that the same seat (or chair) is
useable by many operators doing same job.

Standing for long periods of time on a cemented floor is fatiguing. If operator has to work only in standing posture, it is
essential to provide resilient anti-fatigue floor mats. Such mats allow small muscle contractions in the legs and force the
blood to keep circulating.

Determination of location of tools, materials, controls, displays and other devices.

We all know that greater the distance through which operator moves his body member while doing work, larger is the
requirement of muscular effort, control and time. This means that all tools, materials, controls, etc need to be located
within close reach of the operator. In this context, two areas can be identified: normal working area and maximum
working area. Figure identifies these areas in horizontal and vertical planes.

Within these areas, all tools, materials, controls, displays and other devices must be located on the basis of any of the
following principles.

(i) Importance Principle. According to this principle, the most important item or group of items is first located within the
normal area in the best position. The next important component item or group of items is then selected and located in the
best location within the remaining area. In this way, all the items are located.

(ii) Frequency of Use Principle. According to this principle, the item with the greatest frequency of use has the highest
priority for location at the optimum position. From within the remaining items to be located in the remaining area, the
same principle can then be applied repetitively.

(iii) Functional Principle. This principle provides for grouping of items according to their function. For instance, all
controls that are functionally related may be grouped together and located at one place.

(iv) Sequence of Use Principle. According to this principle, items are located according to sequence of their use. For
illustration, let us consider the case of assembly. As we know, an assembly is made by assembling the sub-assemblies in a
specific order. From motion economy or production efficiency point of view, it would be better if sub-assemblies and
other items are located in the sequence in which they are to be used in assembly.

Further, for better productivity, it is important that location of all tools, materials and controls be fixed so that their
"search" and ―select" is minimized.

LECTURE 8

WORK MEASUREMENT
Work measurement refers to the estimation of standard time for an activity, that is the time allowed for completing one
piece of job by using the prescribed method. Standard time can be defined as the time taken by an average experienced
worker for the job with provisions for delays beyond the worker's control.

There are several techniques used for estimation of standard time in industry. These include time study, work sampling,
standard data, and predetermined motion time system.

Applications:

Standard times for operations are useful for several applications in industry, like

• Estimating material, machinery, and equipment requirements.

• Estimating production cost per unit as an input to

 Preparation of budgets
 Determination of selling price
 Make or buy decision

• Estimating manpower requirements.

• Estimating delivery schedules and planning the work

• Balancing the work of operators working in a group.

• Estimating performance of workers and using that as the basis for incentive payment to those direct and indirector labor
who show greater productivity.

We will study some of the popular techniques of work measurement.

TIME STUDY. It is the most versatile and the most widely used technique of work measurement.

Definition:

Time study is a technique to estimate the time to be allowed to a qualified and well-trained worker working at a normal
pace to complete a specified task by using specified method.

This technique is based on measuring the work content of the task when performed by the prescribed method, with the
allowance for fatigue and for personal and unavoidable delays.

Time Study Procedure:

The procedure for time study can best be described step-wise, which are self explanatory.

Step 1: Define objective of the study. This involves statement of the use of the result, the precision desired, and the
required level of confidence in the estimated time standards.

Step 2: Verify that the standard method and conditions exist for the operation and the operator is properly trained. If need
is felt for method study or further training of operator, the same may be completed before starting the time study.

Step 3: Select operator to be studied if there are more than one operator doing the same task.

Step 4: Record information about the standard method, operation, operator, product, equipment, and conditions on the
Time Study observation sheet.
Step 5: Divide the operation into reasonably small elements, and record them on the Time Study observation sheet.

Step 6: Time the operator for each of the elements. Record the data for a few number of cycles on the Time Study
observation sheet. Use the data to estimate the total number of observations to be taken.

Step 7: Collect and record the data of required number of cycles by timing and rating the operator.

Step 8: Calculate the representative watch time for each element of operation. Multiply it by the rating factor to get
normal time.

Normal time = Observed time x Rating factor

Calculate the normal time for the whole operation by adding the normal time of its various elements.

Step 9: Determine allowances for fatigue and various delays.

Step 10: Determine standard time of operation.

Standard time = Normal time + allowances

Selection of job for Time Study

Time Study is conducted on a job

• which has not been previously time-studied.

• for which method change has taken place recently.

• for which worker(s) might have complained as having tight time standards.

Selection of Worker for Time Study

The selection of worker for time study is a very important factor in the success of the study. If there is only one person on
the job, as usually is, then there is no choice. But if more than one person is performing the same operation, the time study
man may time one or more of the workers. If all the workers are using the same method for doing the job and there is
different in the rate of their doing it, it is necessary to select a suitable worker for the study. The worker on which time
study should be conducted must

 have necessary skill for the job.

 have sufficient experience with the given method on the job (that is, he should have crossed the learning stage).
 be an ‗average' worker as regards the speed of working.
 be temperamentally suited to the study (those who can't work in normal fashion when watched, are not suitable
for the study).
 have knowledge about the purpose of study.

Time Study Equipment

The following equipment is needed for time study work.

• Timing device

• Time study observation sheet

• Time study observation board

• Other equipment

Timing Device. The stop watch ( see Figure ) is the most widely used timing device used for time study, although
electronic timer is also sometimes used. The two perform the same function with the difference that electronic timer can
measure time to the second or third decimal of a second and can keep a large volume of time data in memory.

Time Study Observation Sheet. It is a printed form with spaces provided for noting down the necessary information
about the operation being studied, like name of operation, drawing number, and name of the worker, name of time study
person, and the date and place of study. Spaces are provided in the form for writing detailed description of the process
(element-wise), recorded time or stop-watch readings for each element of the process, performance rating(s) of operator,
and computation. Figure shows a typical time study observation sheet.

Time Study Board. It is a light -weight board used for holding the observation sheet and stopwatch in position. It is of
size slightly larger than that of observation sheet used. Generally, the watch is mounted at the center of the top edge or as
shown in Figure near the upper right-hand corner of the board. The board has a clamp to hold the observation sheet.
During the time study, the board is held against the body and the upper left arm by the time study person in such a way
that the watch could be operated by the thumb/index finger of the left hand. Watch readings are recorded on the
observation sheet by the right hand.

Other Equipment. This includes pencil, eraser, device like tachometer for checking the speed, etc.

Dividing Work into Short Elements

Timing a complete task as one element is generally not satisfactory. For the purpose of time study the task is normally
broken
into short elements and each element is timed separately, for the following
reasons:

(1) To separate unproductive part of task from the productive one.

(2) To improve accuracy in rating. The worker may not work at the
same speed throughout the cycle. He may perform some elements faster and
some slower. Breaking of task into short elements permits rating of each
element separately which is more realistic than just rating once for the complete
cycle.

(3) To identify elements causing high fatigue. Breaking of task into short elements permits giving appropriate rest
allowances to different elements.

(4) To have detailed job specifications. This helps in detection of any variation in the method that may occur after the time
standard is established.

(5) To prepare standard data for repeatedly occurring elements.

The following guidelines should be kept in mind while dividing a task into elements.

(1) The elements should be of as short duration as can be accurately timed. (This in turn, depends on the skill of the time
study man, method of timing and recording, and many other factors. Generally, with the stop watch, elements of duration
less than 0.03 to 0.05 minute are difficult to time accurately. The elements should not normally be longer than 0.40 min.).

(2) Manually performed elements should be separated from machine paced elements. (Time for machine paced elements
can be determined by calculation). Machine elements are not rated against a normal. This rule also helps in recognition of
delays.
(3) Constant elements should be separated from variable elements.
(Constant elements are those elements which are independent of the size, weight,
length, or shape of the workpiece. For example, the time to pick screw driver
from its place and bring it to the head of a screw is constant, whereas the time
to tighten or loosen the screw is a variable, depending upon the length and
size of the screw).

(4) The beginnings and endings of elements should be easily distinguishable. These should preferably be associated with
some kind of sound.

(5) Irregular elements, those not repeated in every cycle, should be separated from regular elements. For example, if the
jig is cleaned off after every ten parts produced, "cleaning" is an irregular element, and its time should be spread over ten
cycles.

(6) Unnecessary motions and activities should be separated from those considered essential.

(7) Foreign or accidental elements should be listed separately. Such elements are generally of non-repetitive type.

Number of cycles to be timed.

The following general principles govern the number of cycles to get the representative average cycle time.

(1) Greater the accuracy desired in the results, larger should be the number of cycles observed.

(2) The study should be continued through sufficient number of cycles so that occasional elements such as setting-up
machine, cleaning of machine or sharpening of tool are observed for a good number of times.

(3) Where more than one operator is doing the same job, short study (say 10 to 15 cycles) should be conducted on each of
the several operators than one long study on a single operator.

It is important that enough cycles are timed so that reliable average is obtained.

Following techniques are used to determine the number of cycles to be timed.

(i) Use of Tables: On the consideration of the cost of obtaining the data and the desired accuracy in results, most
companies have prepared their own tables for the use of time study people, which indicate the number of cycles to be
timed as a function of the cycle time and the frequency of occurrence of the job in the company. For example, one
Company uses the Table for such purposes.

(ii) Statistical methods: On the basis of the requirements of the particular situation involved, accuracy and confidence
level are decided (An accuracy of a confidence level of 95% is considered reasonable in most cases). A preliminary study
is conducted in which some (say N) cycles are timed. Standard deviation o of these (N) observations is calculated as
(iii) Mundel Method: In this method the following steps are followed.

Step 1. Take a few good watch readings of the work cycle. (Generally, 10 readings are taken if cycle time is less than 2
minutes, otherwise 5 readings).

Step 2. Find the ratio , where H and L are respectively the highest and the lowest value of the leading.

Step 3. Corresponding to the value of the ratio, determine the number of observations from the Table.

Normal Performance

There is no universal concept of Normal Performance. However, it is generally defined as the working rate of an average
qualified worker working under capable supervision but not under any incentive wage payment scheme. This rate of
working is characterized by the fairly steady exertion of reasonable effort, and can be maintained day after day without
undue physical or mental fatigue.

The level of normal performance differs considerably from one company to another. What company a calls 100 percent
performance, company B may call 80 percent, and company C may call 125 percent and so on. It is important to
understand that the level that a company selects for normal performance is not critical but maintaining that level uniform
among time study persons and constant with the passage of time within the company is extremely important.

There are, of course, some universally accepted benchmark examples of normal performance, like dealing 52 cards in four
piles in 0.5 minute, and walking at 3 miles per hour (4.83 km/hr). In order to make use of these benchmarks, it is
important that a complete description about these be fully understood, like in the case of card dealing, what is the distance
of each pile with respect to the dealer, technique of grasping, moving and disposal of the cards.

Some companies make use of video films or motion pictures for establishing what they consider as normal speed or
normal rate of movement of body members. Such films are made of typical factory jobs with the operator working at the
desired normal pace. These films are found to be useful in demonstrating the level of performance expected from the
operators and also for training of time study staff.

LECTURE 9

PERFORMANCE RATING
During the time study, time study engineer carefully observes the performance of the operator. This performance seldom
conforms to the exact definition of normal or standard. Therefore, it becomes necessary to apply some 'adjustment' to the
mean observed time to arrive at the time that the normal operator would have taken to do that job when working at an
average pace. This 'adjustment' is called Performance Rating.

Determination of performance rating is an important step in the work measurement procedure. It is based entirely on the
experience, training, and judgment of the work-study engineer. It is the step most subjective and therefore is subject to
criticism.

Performance Rating can be defined as the procedure in which the time study engineer compares the performance of
operator(s) under observation to the Normal Performance and determines a factor called Rating Factor.

System of Rating

There are several systems of rating the performance of operator on a job.

These are:

• Pace Rating

• Westinghouse System of Rating

• Objective Rating

• Synthetic Rating

A brief description of each rating method follows.

Pace Rating

Under this system, operator's performance is evaluated by considering his rate of accomplishment of the work. The study
person measures the effectiveness of the operator against the concept of normal performance and then assigns a
percentage to indicate the ratio of the observed performance to normal or standard performance.

In this method, which is also called the speed rating method, the time study person judges the operators speed of
movements, i.e. the rate at which he is applying himself, or in other words "how fast" the operator performs the motions
involved.

Westinghouse System of Rating

This method considers four factors in evaluating the performance of operator: skill, effort, conditions, and consistency.

Skill may be defined as the proficiency at of an individual in following the given method. It is demonstrated by co-
ordination of mind and hands. A person's skill in a given operation increases with his experience on the job, because
increased familiarity with work brings speed, smoothness of motions and freedom from hesitations.

The Westinghouse system lists six classes of each factor. For instance the classes of skill are poor, fair, average, good,
excellent and superskill, as given in a Table . Each class has further two degrees. The time study person evaluates the skill
displayed by the operator. And puts it in one of the six classes and also decides the degree in that class, higher or lower,
i.e. 1 or 2. As equivalent % value of each class of skill is provided in the Table, the rating is translated into its equivalent
percentage value, which ranges from +15 % (for super skill of higher degree) to -22 % (for poor skill of lower degree).
In a similar fashion, the ratings for effort, conditions, and consistency are given using the Table for each of the factors. By
algebraically combining the ratings with respect to each of the four factors, the final performance-rating factor is
estimated.

Objective Rating

In this system, speed of movements and job difficulty are rated separately and the two estimates are combined into a
single value. Rating of speed or pace is done as discussed earlier, and the rating of job difficulty is done by selecting
adjustment factors corresponding to characteristics of operation with respect to (i) amount of body used, (ii) foot pedals,
(iii) bimanual ness, (iv) eye-hand co-ordination, (v) handling requirements and (vi) weight handled or resistance
encountered. Mundel and Danner have given Table of % values (adjustment factors) for the effects of various difficulties
in the operation performed.

For an operation under study, a numerical value for each of the six factors is assigned, and the algebraic sum of the
numerical values called job difficulty adjustment factor is estimated.

The rating factor R can be expressed as

R=PxD

Where: P = Pace rating factor, and

D = Job difficulty adjustment factor.

Synthetic Rating

This method of rating has two main advantages over other methods. These are (i) it does not rely on the judgment of time
study person and (ii) it gives consistent results.

The time study is made as usual. Some manually controlled elements of the work cycle are selected. Using a PMT system
(Pre-determined motion time system), the times for these selected elements are determined. The times of these elements as
determined are compared with the actual observed times and the performance factor is estimated for each of the selected
elements.

Performance or Rating Factor, R = P / A

Where P = Predetermined motion time of the element, and

A = Average actual observed time of the element.

The overall rating factor is the mean of rating factors determined for the selected elements. This is applied uniformly to all
the manually controlled elements of the work cycle.

Example

A work cycle has been divided into 8 elements and time study has been conducted. The average observed times for the
elements are given in the following Table:

Element 1 2 3 4 5 6 7 8
No.

Element M M P M M M M M
Type
Average 0.14 0.16 0.30 0.52 0.26 0.45 0.34 0.15
 actual
time
(minutes)

M = Manually Controlled, P = Power Controlled

Total observed time of work cycle = 2.32 min.

Suppose we select three elements 2, 5 and 8 (These must be manually controlled elements). By using some PMT system,
suppose we determine the times of these elements as

Elements No. 2 5 8
PMT System times 0.145 0.255 0.145
(min)

Rating factor for element 2 = 0.145 / 0.16 = 90.62 %.

Rating factor for element 5 = 0.255 / 0.26 = 98.08 %.

Rating factor for element 8 = 0.145 / 0.15 = 96.66 %.

The mean of the rating factors of selected elements = 95.12 % or say 95 % is the rating factor that will be used for all the
manual elements of the work cycle.

The normal time of the cycle can than be calculated as.

Element No. 1 2 3 4 5 6 7 8
Element M M P M M M M M
Type
Average 0.14 0.16 0.30 0.52 0.26 0.45 0.34 0.15
actual time
(min)
PMT system 0.145 0.255 0.145
time (min)
Performance 95 95 100 95 95 95 95 95
Rating
Factor

Normal Cycle Time

= 0.95(0.14+0.16+0.52+0.26+0.45+0.34+0.15) +1.00(0.30)

=1.92+0.30

=2.22 minutes

It is to be noted that power controlled (or machine-paced) elements are always given 100% rating.

Allowances

The readings of any time study are taken over a relatively short period of time. The normal time arrived at, therefore, does
not include unavoidable delay and other legitimate lost time, for example, in waiting for materials, tools or equipment;
periodic inspection of parts; interruptions due to legitimate personal needs, etc. It is necessary and important that the time
study person applies some adjustment, or allowances, to compensate for such losses so that fair time standard is
established for the given job.

Allowances are generally applied to total cycle time as some percentage of it, but sometimes these are given separately for
machine time as some % and for manual effort time some other %. However, no allowances are given for interruptions
which may be due to factors which are within the operator's control or which are avoidable.

Most companies allow the following allowances to their employees.

• Constant allowances (for personal needs and basic fatigue)

• Delay Allowance (for unavoidable delays)

• Fatigue Allowance (for job dependent fatigue)

• Personal Allowance

• Special Allowance

Delay Allowance

This time allowance is given to operator for the numerous unavoidable delays and interruptions that he experiences every
day during the course of his work. These interruptions include interruptions from the supervisor, inspector, planners,
expediters, fellow workers, production personnel and others. This allowance also covers interruptions due to material
irregularities, difficulty in maintaining specifications and tolerances, and interference delays where the operator has to
attend to more than one machine.

Fatigue Allowance

This allowance can be divided into two parts: (i) basic fatigue allowance and (ii) variable fatigue allowance. The basic
fatigue allowance is given to the operator to compensate for the energy expended for carrying out the work and to
alleviate monotony. For an operator who is doing light work while seated, under good working conditions and under
normal demands on the sensory or motor system, a 4% of normal time is considered adequate. This can be treated as a
constant allowance.

The magnitude of variable fatigue allowance given to the operator depends upon the severity of conditions, which cause
extra (more than normal) fatigue to him. As we know, fatigue is not homogeneous. It ranges from strictly physical to
purely psychological and includes combinations of the two. On some people it has a marked effect while on others, it has
apparently little or no effect. Whatever may be the kind of fatigue-physical or mental, the result is same-it reduces the
work output of operator. The major factors that cause more than just the basic fatigue includes severe working conditions,
especially with respect to noise, illumination, heat and humidity; the nature of work, especially with respect to posture,
muscular exertion and tediousness, and like that.

It is true that in modern industry, heavy manual work, and thus muscular fatigue is reducing day by day but mechanization
is promoting other fatigue components like monotony and mental stress. Because fatigue in totality cannot be eliminated,
proper allowance has to be given for adverse working conditions and repetitiveness of the work.

Personal Allowance

This is allowed to compensate for the time spent by worker in meeting the physical needs, for instance a periodic break in
the production routine. The amount of personal time required by operator varies with the individual more than with the
kind of work, though it is seen that workers need more personal time when the work is heavy and done under unfavorable
conditions.

The amount of this allowance can be determined by making all-day time study or work sampling. Mostly, a 5 %
allowance for personal time (nearly 24 minutes in 8 hours) is considered appropriate.

Special Allowances

These allowances are given under certain special circumstances. Some of these allowances and the conditions under
which they are given are:

Policy Allowance: Some companies, as a policy, give an allowance to provide a satisfactory level of earnings for a
specified level of performance under exceptional circumstance. This may be allowed to new employees, handicap
employees, workers on night shift, etc. The value of the allowance is typically decided by management.

Small Lot Allowance: This allowance is given when the actual production period is too short to allow the worker to come
out of the initial learning period. When an operator completes several small-lot jobs on different setups during the day, an
allowance as high as 15 percent may be given to allow the operator to make normal earnings.

Training Allowance: This allowance is provided when work is done by trainee to allow him to make reasonable earnings.
It may be a sliding allowance, which progressively decreases to zero over certain length of time. If the effect of learning
on the job is known, the rate of decrease of the training allowance can be set accordingly.

Rework Allowance: This allowance is provided on certain operation when it is known that some percent of parts made are
spoiled due to factors beyond the operator's control. The time in which these spoiled parts may be reworked is converted
into allowance.

Different organizations have decided upon the amount of allowances to be given to different operators by taking help
from the specialists / consultants in the field and through negotiations between the management and the trade unions. ILO
has given its recommendations about the magnitude of various allowances, as shown in Table.

Example:

In making a time study of a laboratory technician performing an analysis of processed food in a canning factory, the
following times were noted for a particular operation.

Run 1 2 3 4 5 6 7 8 9 10 11 12
 Operation 21 21 16 19 20 16 20 19 19 20 40 19
time
(sec.)
Run 13 14 15 16 17 18 19 20 21 22 23 24
Operation 21 18 23 19 15 18 18 19 21 20 20 19
time
(sec.)

If the technician's performance has been rated at 120 percent, and the company policy for allowance (personal, fatigue,
etc.) stipulates 13 percent,

• Determine the normal time.

• Determine the standard time.

Watch readings falling 50 % above and 25 % below the average may be considered as abnormal.

Ans:

LECTURE 10

WORK SAMPLING

Work Sampling (also sometimes called ratio delay study) is a technique of getting facts about utilization of machines or
human beings through a large number of instantaneous observations taken at random time intervals. The ratio of
observations of a given activity to the total observations approximates the percentage of time that the process is in that
state of activity. For example, if 500 instantaneous observations taken at random intervals over a few weeks show that a
lathe operator was doing productive work in 365 observations and in the remaining 135 observations he was found 'idle'
for miscellaneous reasons, then it can be reliably taken that the operator remains idle (135/500) x 100 = 27 % 0f the time.
Obviously, the accuracy of the result depends on the number of observations. However, in most applications there is
usually a limit beyond which greater accuracy of data is not economically worthwhile.

Use of Work Sampling for Standard Time Determination

Work sampling can be very useful for establishing time standards on both direct and indirect labor jobs. The procedure for
conducting work sampling study for determining standard time of a job can be described step-wise.

Step 1 . Define the problem.

• Describe the job for which the standard time is to be determined.

• Unambiguously state and discriminate between the two classes of activities of operator on the job: what are the
activities of job that would entitle him to be in 'working" state.

This would imply that when operator will be found engaged in any activity other than those would entitle him to be in
"Not Working" state.

Step 2. Design the sampling plan.

• Estimate satisfactory number of observations to be made.

• Decide on the period of study, e.g. two days, one week, etc.

• Prepare detailed plan for taking the observations.

This will include observation schedule, exact method of observing, design of observation sheet, route to be followed,
particular person to be observed at the observation time, etc.

Step 3. Contact the persons concerned and take them in confidence regarding conduct of the study.

Step 4. Make the observations at the pre-decided random times about the working / not working state of the
operator. When operator is in working state, determine his performance rating. Record both on the observation
sheet.

Step 5. Obtain and record other information. This includes operator's starting time and quitting time of the day
and total number of parts of acceptable quality produced during the day.

Step 6. Calculate the standard time per piece.

We will now briefly discuss some important issues involved in the procedure.

Number of Observations

As we know, results of study based on larger number of observations are more accurate, but taking more and more
observations consumes time and thus is costly. A cost-benefit trade-off has thus to be struck. In practice, the following
methods are used for estimation of the number of observations to be made.

(i) Based on judgment. The study person can decide the necessary number of observations based on his judgment. The
correctness of the number may be in doubt but estimate is often quick and in many cases adequate.

(ii) Using cumulative plot of results. As the study progresses the results of the proportion of time devoted to the given
state or activity, i.e. Pi from the cumulative number of observations are plotted at the end of each shift or day. A typical
plot is shown in Figure. Since the accuracy of the result improves with increasing number of observations, the study can
be continued until the cumulative Pi appears to stabilize and collection of further data seems to have negligible effect on
the value of Pi.

(iii) Use of statistics. In this method, by considering the importance of the decision to be based on the results of study, a
maximum tolerable sampling error in terms of confidence level and desired accuracy in the results is specified. A pilot
study is then made in which a few observations are taken to obtain a preliminary estimate of Pi. The number of
observations N necessary are then calculated using the following expression.

The number of observations estimated from the above relation using a value of Pi obtained from a preliminary study
would be only a first estimate. In actual practice, as the work sampling study proceeds, say at the end of each day, a new
calculation should be made by using increasingly reliable value of Pi obtained from the cumulative number of
observations made.

Determination of Observation Schedule

The number of instantaneous observations to be made each day mainly depends upon the nature of operation. For
example, for non-repetitive operations or for operations in which some elements occur in-frequently, it is advisable to take
observations more frequently so that the chance of obtaining all the facts improves. It also depends on the availability of
time with the person making the study. In general, about 50 observations per day is a good figure. The actual random
schedule of the observations is prepared by using random number table or any other technique.

Design of Observation Sheet

A sample observation sheet for recording the data with respect to whether at the pre-decided time, the specified worker on
job is in 'working' state or 'non-working' state is shown in Figure. It contains the relevant information about the job, the
operators on job, etc. At the end of each day, calculation can be done to estimate the percent of time workers on the job
(on an average) spend on activities, which are considered as part of the job.

Conducting Work Sampling Study

At the predecided times of study, the study person appears at the work site and observes the specific worker (already
randomly decided) to find out what is he doing. If he is doing activity which is part of the job, he is ticked under the
column 'Working' and his performance rating is estimated and recorded. If he is found engaged in an activity which is not
a part of job, he is ticked under the column 'Not Working'. At the end of day, the number of ticks in 'Working' column is
totaled and average performance rating is determined.

The observed time (OT) for a given job is estimated as

The normal time (NT) is found by multiplying the observed time by the average performing index (rating factor).

Where = is average rating factor to be determined as , Figure

The standard time is determined by adding allowances to the normal time.

Example

A work sampling study was made of a cargo loading operation for the purpose of developing its standard time. The study
was conducted for duration of 1500 minutes during which 300 instantaneous observations were made at random intervals.
The results of study indicated that the worker on the job was working 80 percent of the time and loaded 360 pieces of
cargo during the study period. The work analyst rated the performance at 90 %. If the management wishes to permit a 13
% allowance for fatigue, delays and personal time, what is the standard time of this operation?

Ans:

Here, total study period = 1500 minutes

Working fraction = 80 percent

Average rating = 90 percent

Number of units loaded = 360

Allowances = 13 %
Advantages and Disadvantages of Work Sampling in Comparison with Time Study.

Advantages

Economical

• Many operators or activities which are difficult or uneconomical to measure by time study can readily be measured by
work sampling.

• Two or more studies can be simultaneously made of several operators or machines by a single study person. Ordinarily
a work study engineer can study only one operator at a time when continuous time study is made.

• It usually requires fewer man-hours to make a work sampling study than to make a continuous time study. The cost may
also be about a third of the cost of a continuous time study.

• No stopwatch or other time measuring device is needed for work sampling studies.

• It usually requires less time to calculate the results of work sampling study. Mark sensing cards may be used which can
be fed directly to the computing machines to obtain the results just instantaneously.

Flexible

6. A work sampling study may be interrupted at any time without affecting the results.

7. Operators are not closely watched for long period of time. This decreases the chance of getting erroneous results for
when a worker is observed continuously for a long period, it is probable that he will not follow his usual routine exactly
during that period.

Less Erroneous

8. Observations may be taken over a period of days or weeks. This decreases the chance of day-to-day or week-to-week
variations that may affect the results.

Operators Like It

9. Work sampling studies are preferred to continuous time study by the operators being studied. Some people do not like
to be observed continuously for long periods of time.

Observers Like It

10. Work sampling studies are less fatiguing and less tedious to make on the part of time study engineer.

Disadvantages

• Work sampling is not economical for the study of a single operator or operation or machine. Also, work-sampling study
may be uneconomical for studying operators or machines located over wide areas.

• Work sampling study does not provide elemental time data.

• The operator may change his work pattern when he sees the study person. For instance, he may try to look productive
and make the results of study erroneous.

• No record is usually made of the method being used by the operator. Therefore, a new study has to be made when a
method change occurs in any element of operation.

• Compared to stop watch time study, the statistical approach of work sampling study is difficult to understand by
workers.

Computerized Work Sampling

Use of a computer can save as much as 30 to 40 percent of the total work sampling study cost. This is because too much
clerical effort is involved in summarizing work sampling data, e.g. in determining the number of observations required,
determining the daily observations required, determining the number of trips to the area being studied per day,
determining the time of each observation, calculating the accuracy of results, plotting data on control charts and like that.
Computers can be used for mechanization of the repetitive calculations, display of control charts and calculation of daily
as well as cumulative results.

LECTURE 11

PREDETERMINED MOTION TIME SYSTEM

A predetermined motion time system (PMTS) may be defined as a procedure that analyzes any manual activity in terms
of basic or fundamental motions required to perform it. Each of these motions is assigned a previously established
standard time value and then the timings for the individual motions are synthesized to obtain the total time needed for
performing the activity.

The main use of PMTS lies in the estimation of time for the performance of a task before it is performed. The procedure is
particularly useful to those organizations which do not want troublesome performance rating to be used with each study.

Applications of PMTS are for

(i) Determination of job time standards.

(ii) Comparing the times for alternative proposed methods so as to find the economics of the proposals prior to production
run.

(iii) Estimation of manpower, equipment and space requirements prior to setting up the facilities and start of production.

(iv) Developing tentative work layouts for assembly lines prior to their working in order to minimize the amount of
subsequent re-arrangement and re-balancing.

(v) Checking direct time study results.

A number of PMTS are in use, some of which have been developed by individual organizations for their own use, while
other organizations have developed and publicized for universal applications.

Some commonly used PMT systems are:

Work factor (1938)

Method Time Measurement (1948)

Basic Motion Time (1951)

Dimension Motion Time (1954)

Important considerations which may be made while selecting a PMT system for application to particular industry are:

Cost of Installation. This consists mainly of the cost of getting expert for applying the system under consideration.

Application Cost. This is determined by the length of time needed to set a time standard by the system under
consideration.

Performance Level of the System. The level of performance embodied in the system under consideration may be
different from the normal performance established in the industry where the system is to be used. However, this problem
can be overcome by 'calibration' which is nothing but multiplying the times given in the PMT Tables by some constant or
by the application of an adjustment allowance.

Consistency of Standards. Consistency of standards set by a system on various jobs is a vital factor to consider. For this,
the system can be applied on a trial basis on a set of operations in the plant and examined for consistency in the so
obtained operation times.

Nature of Operation. Best results are likely to be achieved if the type and nature of operations in the plant are similar to
the nature and type of operations studied during the development of the system under consideration.

Advantages and limitations of using PMT systems

Advantages

Compared to other work measurement techniques, all PMT systems claim the following advantages:

There is no need to actually observe the operation running. This means the estimation of time to perform a job can be
made from the drawings even before the job is actually done. This feature is very useful in production planning,
forecasting, equipment selection, etc.

The use of PMT eliminates the need of troublesome and controversial performance rating. For the sole reason of avoiding
performance rating, some companies have been using this technique.

The use of PMT forces the analyst to study the method in detail. This sometimes helps to further improve the method.

A bye-product of the use of PM times is a detailed record of the method of operation. This is advantageous for installation
of method, for instructional purposes, and for detection and verification of any change that might occur in the method in
future.

The PM times can be usefully employed to establish elemental standard data for setting time standards on jobs done on
various types of machines and equipment.

The basic times determined with the use of PMT system are relatively more consistent.

Limitations

There are two main limitations to the use of PMT system for establishing time standards. These are: (i) its application to
only manual contents of job and (ii) the need of trained personnel. Although PMT system eliminates the use of rating,
quite a bit of judgment is still necessarily exercised at different stages.

Physiological Methods for Work Measurement

The physiological cost to an operator of performing any given physical work results from the activities of the muscles of
arms, legs, back and other parts of the body and is, therefore, affected by the number and type of muscles involved in
either moving the body member(s) or controlling antagonist contraction.

The activities of body muscles cause changes in oxygen consumption, heart rate, body temperature, lactic acid
concentration in blood, 17-ketosteroid excretion in urine, pulmonary ventilation, and other factors. Studies have shown
that some of these factors are only slightly affected by muscular activity. The important factors which have linear
correlation with the physiological cost of work performed by an individual are oxygen consumption, heart rate, and
pulmonary ventilation.

Increase in Heart Rate

When a person is at rest, his heart rate is at a fairly steady level (generally at about 70 beats/minute). Then when he starts
doing some muscular work his pulse rate increases rapidly to about 110 beats/minute and remains near to this level during
the working period. When work ends, the recovery begins and his heart rate drops off and finally returns to the original
resting level ( Figure ).

The increase in heart rate during work has been used as an index of the physiological cost of the job. Some physiologists
have also proposed the use of 'the rate of recovery immediately after work stops' for the evaluation of physiological cost
of certain types of work. It is to be noted that the total physiological cost of a task consists of the energy expenditure
during work and the energy expenditure above the resting rate during the recovery period. It is generally agreed that the
optimum limit of industrial performance is reached when the average pulse rate during the work lies 30 beats/minute
above the resting pulse rate.

Measurement. With every heart beat, a small electric potential is generated. This signal can be picked up by placing silver
electrodes on either side of the chest, and transmitted to a receiver, where these can be counted directly or recorded
continuously on a ruled graph paper or integrated over time to measure in units of beats per minute with the help of a
cardio tachometer.

Another method of getting the heart beat signals is through the use of an ear lobe unit, which is a photo duodiode with a
light source. This unit is mounted on an ear of the subject in such a way that the duodiode is on one side and the light
source is on the other side of the ear. As the capacity of the ear lobe changes due to the blood surges through the ear with
beats of the heart, impulses are created which are transmitted and recorded.

A simple method to get the heart beat rate is through the use of a stethoscope and stop watch. Studies have shown that the
data obtained in this manner are fairly reliable and also easy to obtain.

Oxygen Consumption. It may be defined as the volume of oxygen which a person extracts from the air he inhales.
Increase in the rate of oxygen consumption from the resting level to the working level is also taken as a measure of the
physiological cost of the work done. The oxygen consumption per unit time is usually measured indirectly. To do this the
volume of air exhaled by a person in a certain time is collected and the oxygen content of this air is determined. For this,
use is made of a portable respirometer. It is a lightweight gas meter which is worn on the back of the subject. A mask is
fitted on the face of the subject, and the exhaled air is collected in the respirometer through a rubber tube. The
respirometer directly shows the volume of exhaled air in litres.

A sample of the exhaled air is taken out at random intervals into a rubber bladder and an analysis is carried out of its
content. Comparison is then made between the oxygen content of the two samples-drawn from the exhaled air and another
from the room air. For each litre of oxygen consumed by the human body, there is an average energy turnover of 4.8 Kcal.

Table gives the general values of oxygen consumption, lung ventilation, rectal temperature and heart beats at the different
work loads.

Physiological measurements can be used to compare the energy cost to the operator on a job for which no time standard
exists, with the energy cost to the same operator on a similar operation for which a satisfactory time standard already
exists. By this comparison it is possible to establish the time standard on the job for which it does not exist already. For
the sake of illustration, consider a job of lifting boxes weighing 2-3 kgs. from the floor level and placing it on a conveyor
belt. For this job a time standard of 6 seconds (10 boxes/min.) is being used. When energy measurements were taken, it
was found that to Mr. Singh, the operator on the job, the energy cost of this job was 300 W. Let us suppose now that there
is another jab, similar to the first one, with the difference that here, the weight of the boxes is 5-6 kgs. If it is required to
establish the t ime standard for this job, we need Mr. Singh to do this job of handling 5-6 kg. boxes at various speeds.
From the energy cost data collected on him, we can select the speed of working that gives an energy cost of 300 W. So, by
keeping the energy cost of the two jobs same, the time standard (the number of 5-6 kg. boxes/min.) can be determined.