Scribd
Upload
122 views4 pages

NB 80-160-169 (167) - 135m3-h. 34.7m. 22KW PDF

1. This document provides specifications for a single-stage centrifugal end-suction pump model NB 80-160/169. 2. The pump has a cast iron housing and bronze impeller, stainless steel shaft, and mechanical shaft seal. It is designed to pump liquids from 0-120 degrees Celsius. 3. The pump has a rated flow of 185 cubic meters per hour, head of 30 meters, and is powered by a 3-phase AC motor with a power of 22 kW running at 2930 rpm.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views4 pages

NB 80-160-169 (167) - 135m3-h. 34.7m. 22KW PDF

1. This document provides specifications for a single-stage centrifugal end-suction pump model NB 80-160/169. 2. The pump has a cast iron housing and bronze impeller, stainless steel shaft, and mechanical shaft seal. It is designed to pump liquids from 0-120 degrees Celsius. 3. The pump has a rated flow of 185 cubic meters per hour, head of 30 meters, and is powered by a 3-phase AC motor with a power of 22 kW running at 2930 rpm.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Position Qty.

Description Single Pric


1 NB 80-160/169 ,00 EUR

Note! Product picture may differ from actual product

Product No.: 96125118


Single-stage, centrifugal, end-suction pump.

The pump has the following characteristics:


- flange dimensions according to
EN 1092-2,
- hollow steel coupling,
- Cast iron volute
pump housing and motor stool,
- stainless steel shaft
and Bronze impeller,
- Unbalanced mechanical shaft seal
according to EN 12756.

The motor is a 3-phase AC motor.

Liquid:
Liquid temperature range: 0 .. 120 °C

Technical:
Rated flow: 185 m³/h
Rated head: 30 m
Actual impeller diameter: 169 mm
Type of shaft seal: BAQE
Curve tolerance: ISO 9906 Annex A

Materials:
Material, pump housing: Cast iron
EN-JL1040 DIN W.-Nr.
A48-40B ASTM
Material, impeller: Bronze
EN-JL1030 DIN W.-Nr.
A48-30B ASTM

Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 16 bar
Standard, pipe connection: DIN
Size, pump inlet: DN 100
Size, pump outlet: DN 80
Pressure stage, pipe connec.: PN 16

Electrical data:
Motor type: Teco
Efficiency class: 1
Number of poles: 2
P2 : 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 D / 660-690 Y V
Rated current: 41 / 23.6 A
Starting current: 770 %
Cos phi - power factor: 0,87

Printed from Grundfos CAPS 1/4


Position Qty. Description Single Pric
Rated speed: 2930 rpm
Full load motor efficiency: 92,5 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F

Others:
Net weight: 193 kg

Printed from Grundfos CAPS 2/4


96125118 NB 80-160/169
H NB 80-160/169 eta
(m) Q = 135 m³/h (%)
H = 34.7 m

36

32

28

24

20

16 80

70

12 60

50

8 40

30

4 20

10
Eta pump = 72.7 %
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 Q(m³/h)
P2 P2 = 17.6 kW NPSH
(kW) (m)
24 12

20 10

16 8

12 6

8 4

4 2

0 NPSH = 3 m 0
Printed from Grundfos CAPS 3/4
96125118 NB 80-160/169

368 602 140


125 80

285

225
285
100

180
279
121 241
330
350
350

241

279
178
178

178 121
178

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS 4/4

You might also like