Scribd
Upload
136 views4 pages

NB 40-250-230. 60m3-h. 55.5m. 15KW PDF

This document summarizes the specifications of a centrifugal end-suction pump. The pump has a cast iron housing and bronze impeller. It is rated to pump 54 cubic meters of liquid per hour at a head of 60 meters. The pump is powered by a 3-phase AC motor rated at 15 kW and has mechanical shaft seals, pipe connections according to DIN standards, and an IP55 enclosure class.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
136 views4 pages

NB 40-250-230. 60m3-h. 55.5m. 15KW PDF

This document summarizes the specifications of a centrifugal end-suction pump. The pump has a cast iron housing and bronze impeller. It is rated to pump 54 cubic meters of liquid per hour at a head of 60 meters. The pump is powered by a 3-phase AC motor rated at 15 kW and has mechanical shaft seals, pipe connections according to DIN standards, and an IP55 enclosure class.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Position Qty.

Description Single Pric


1 NB 40-250/230 ,00 EUR

Note! Product picture may differ from actual product

Product No.: 96124993


Single-stage, centrifugal, end-suction pump.

The pump has the following characteristics:


- flange dimensions according to
EN 1092-2,
- hollow steel coupling,
- Cast iron volute
pump housing and motor stool,
- stainless steel shaft
and Bronze impeller,
- Unbalanced mechanical shaft seal
according to EN 12756.

The motor is a 3-phase AC motor.

Liquid:
Liquid temperature range: 0 .. 120 °C

Technical:
Rated flow: 54 m³/h
Rated head: 60 m
Actual impeller diameter: 230 mm
Type of shaft seal: BAQE
Curve tolerance: ISO 9906 Annex A

Materials:
Material, pump housing: Cast iron
EN-JL1040 DIN W.-Nr.
A48-40B ASTM
Material, impeller: Bronze
2.1096.01 DIN W.-Nr.
B584-C83600 ASTM

Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 16 bar
Standard, pipe connection: DIN
Size, pump inlet: DN 65
Size, pump outlet: DN 40
Pressure stage, pipe connec.: PN 16

Electrical data:
Motor type: Teco
Efficiency class: 2
Number of poles: 2
P2 : 15 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 D / 660-690 Y V
Rated current: 26.5 / 15.2 A
Starting current: 578 %
Cos phi - power factor: 0,87

Printed from Grundfos CAPS 1/4


Position Qty. Description Single Pric
Rated speed: 2940 rpm
Full load motor efficiency: 91 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F

Others:
Net weight: 172 kg

Printed from Grundfos CAPS 2/4


96124993 NB 40-250/230
H NB 40-250/230 eta
(m) Q = 60.2 m³/h (%)
H = 55.7 m

70

60

50

40 80

70

30 60

50

20 40

30

10 20

10

Eta pump = 60.2 %


0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 Q(m³/h)
P2 P2 = 15.2 kW NPSH
(kW) (m)

16 8

12 6

8 4

4 2

0 NPSH = 5.52 m 0
Printed from Grundfos CAPS 3/4
96124993 NB 40-250/230

343 505 110


100 40

244

225
244
65

160
254
108 210
320
350
350

210

254
178
178

162 108
162

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS 4/4

You might also like