SECTION INDEX

Unique Broadband Systems Ltd.

Waveguide and Coaxial Components

Waveguides
RECTANGULAR WAVEGUIDE PRODUCT LINE 111
TWIST (WITH FLANGES) SERIES NO. 112
TRANSITIONS (FLANGED) SERIES NO. 113
SHORTING PLATES SERIES NO.114
PRESSURE WINDOWS SERIES NO.115
PRESSURE INSERTER SERIES NO.116
BRACKETS AND HANGERS FLANGE HARDWARE KITS SERIES NO.117
TWISTABLE FLEXIBLE WAVEGUIDE SERIES NO.118
STEP TWIST SERIES NO.119
ADAPTER (WAVEGUIDE TO COAX) SERIES NO. 121
END LAUNCH ADAPTER (WAVEGUIDE TO COAX) SERIES NO. 121E
TERMINATION (LOW POWER PRECISION) SERIES NO. 131
TERMINATION (LOW POWER) SERIES NO. 132
TERMINATION (LOW POWER SHORT-LENGTH) SERIES NO. 133
TERMINATION (MEDIUM POWER) SERIES NO. 134
TERMINATION (MEDIUM POWER, SHORT LENGTH) SERIES NO. 135
TERMINATION (HIGH POWER) SERIES NO. 136
BROADWALL DIRECTIONAL COUPLER SERIES NO. 141
DUAL BROADWALL DIRECTION COUPLER SERIES NO. 142
BROADWALL DIRECTIONAL COUPLER SERIES NO. 143
DUAL BROADWALL DIRECTIONAL COUPLER (COAX SECONDARIES) SERIES NO. 144
CROSS GUIDE COUPLER SERIES NO. 145
DUAL CROSS GUIDE COUPLER SERIES NO. 145D
MAGIC TEE SERIES NO. 146
LOOP COUPLER SERIES NO. 147
POWER SAMPLERS SERIES NO. 148
FIXED ATTENUATOR SERIES NO. 152
HORN ANTENNA SERIES NO. 155
DC BLOCK NO. 156
 WAVEGUIDE AND COAXIAL

Unique Broadband Systems Ltd.

Waveguide Product Specifications

 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Rectangular Waveguide
Series No: 111

Rectangular Waveguide Product Line

UBS stocks rectangular waveguide raw materials in sizes ranging from WR-28 to WR-650. UBS is also able to manufacture products
from other industry standard waveguide sizes upon request. In addition to the standard line of waveguide products offered in this
catalogue, UBS also is a supplier of OEM products to the military and commercial communications industry. UBS has the experi-
enced staff and the resources to develop and manufacture waveguide components specific to your OEM application.

Rectangular Waveguide Section Numbering System

The UBS rectangular waveguide section numbering system, allows the end user to specify the exact waveguide section(s) required.

Example 1
• You require a WR-42 straight section(S), 12” long. Flange 1
• The waveguide material selected is bronze(B).
• Flange 1 is to be grooved(G) to accept a gasket
• Flange 2 at the other end is to be flat cover(C).
• The flange mounting holes are to be threaded(T2). A

Part number - 111 – WR42 – B – S – 12.00 – X – X – G – T2 – C – T2

Series No.
WG Size
WG Material
Section Shape
Dimension A
Flange 2
Dimension B
Dimension C
Flange 1
Flange 1 Mounting
Flange 2 NOTE: Dimensions “B” and “C” do not apply and are
Flange 2 Mounting left as “X” in the part number.

Materials
Straight and complex sections can be specified from a choice of high conductivity copper, bronze or aluminum. Flexible wave-
guide is manufactured from a convoluted beryllium-copper alloy material that is fully pressurizable and is flexible in both the E and
H planes. Longitudinal twists are not possible with this type of flexible waveguide. If a rigid longitudinal twist section is required, a
suitable one can be specified from the UBS 112 series. For longitudinal twist use the 118 series of flexible twistable waveguides.

Section Dimensions
The maximum length of rigid waveguide is 6 ft, flexible waveguide is 2 ft, and flexible twistable waveguide is 4 ft.

Tips and Suggestions

Large sections manufactured from copper should be avoided. Instead use bronze for additional strength. It is strongly recom-
mended that a single large complex section be constructed by specifying several smaller and less complicated sections for as-
sembly by the user on site

You are advised to contact UBS for assistance in specifying large complex sections to best meet your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Rectangular Waveguide
Series No: 111
E - BEND S - BEND U - BEND
FLANGE 2 FLG 2
C
FLANGE 1 FLANGE 2
B

FLANGE 1
A B
A C

B
– For E-Plane ( – For E-Plane, – For H-Plane
FLANGE 1 A – For H-Plane

H - BEND Straigt Composite Bend Type M Composite Bend Type W

FLANGE 2 FLANGE 1 FLANGE 2 FLANGE 2

FLANGE 1

A B C
C
A
FLANGE 1
B
A
A
B FLANGE 2

FLANGE 1

Ordering Data
Part number - 111 – X – X – X – X – X – X – X – X – X – X Flange Type C - Cover
Series No. G - Groove
WG Size CHOKE
WG Material CMR, CPR(F, G)
Section Shape Flange T1 - Through Holes
Dimension A Mounting T2 - Threaded
Dimension B Holes A - Alternating
Dimension C
Flange 1 Material
Flange 1 Mounting C Copper
Flange 2
Flange 2 Mounting A Aluminum
B Bronze
Waveguide Section
E E-BEND STANDARD FINISH: is electroless corrosion protection for the metal sur-
H H-BEND -
um plating) are available upon request. Waveguide sizes up to WR-650
S Straight Solid
available. Contact our sales department with your requirements.
F Straight Flex
A S-BEND E-PLANE
Y S-BEND H-PLANE
V U-BEND E-PLANE
Z U-BEND H-PLANE
W Composite Bend Type W
M Composite Bend Type M
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Rectangular Waveguide
Series No: 111
Standard Flange Types

CPR-Grooved Contact Groved CPR

Choke Cover Grooved

Cover Circular Cover Circular CMR

For circular flanges Grooved
number of holes depends
on the size of the waveguide

North American (EIA Standard)

Size UG Style COVER CPR CMR
SQUARE CIRCULAR CHOKE CPR CONTACT CMR SQUARE CIRCULAR GROOVED FLAT GROOVED

FLAT GROOVED

C C CHOKE CONTACT-F CONTACT-G CMR C C G F G CMR

WR28 UG-599/U UG-600A/U

• •
WR34 UG-1530/U
• •
WR42 UG-595/U
UG-597/U
UG-596A/U
UG-598A/U
• •
WR51 • •
WR62 UG-419/U
UG-1665/U
UG-541A/U
• •
WR75 • • • •
WR90 UG-39/U
UG-135/U
UG-40B/U
UG-136B/U
UG-1736/U
UG-1737/U
UG-1360/U
UG-1361/U
UG-1478/U
UG-1483/U • • • • •
WR112 UG-51/U
UG-138/U
UG-52B/U
UG-137B/U
UG-1734/U
UG-1735/U
UG-1358/U
UG-1359/U
UG-1477/U
UG-1482/U • • • • •
WR137 UG-344/U
UG-441/U
UG-343B/U
UG-440B/U
UG-1732/U
UG-1733/U
UG-1356/U
UG-1357/U
UG-1476/U
UG-1481/U • • • • •
WR159 UG-1730/U
UG-1731/U
UG-1354/U
UG-1355/U
• • • • •
WR187 UG-149A/U
UG-407/U
UG-148C/U
UG-406B/U
UG-1728/U
UG-1729/U
UG-1352/U
UG-1353/U
UG-1475/U
UG-1480/U • • • • •
WR229 UG-1726/U
UG-1727/U
UG-1350/U
UG-1351/U
• • • • •
WR284 UG-53/U
UG-584/U
UG-54B/U
UG-585/U
UG-1724/U
UG-1725/U
UG-1348/U
UG-1349/U
UG-1479/U
UG-1484/U • • • • •
WR340 UG-1712/U
UG-1713/U
UG-1346/U
UG-1347/U
• •
WR430 UG-1716/U
UG-1711/U
UG-1344/U
UG-1345/U
• •
WR650 • •
Notes
Brass/Copper
1. UG Style W/G Material Aluminum Alloy
2. For flanges not found in this table please contact our sales department
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Rectangular Waveguide
Series No: 111
Standard Flange Types

PDR CAR UDR

For circular flanges
number of holes depends
on the size of the waveguide

CBR UBR PBR

UAR PAR UER

For circular flanges For circular flanges
number of holes depends number of holes depends
on the size of the waveguide on the size of the waveguide

European (IEC Standard)

Waveguide Size UBR UAR UDR UER PAR PBR PDR CBR CAR
EIA RCSC IEC C C CPR CMR G G CPR-G CHOKE CHOKE

WR28 WG22 R320 UBR320 PBR320

WR34 WG21 R260 UBR260 PBR260
WR42 WG20 R220 UBR220 PBR220 CBR220
WR51 WG19 R180 UBR180 PBR180
WR62 WG18 R140 UBR140 PBR140 CBR140
WR75 WG17 R120 UBR120 UDR120 PBR120 PDR120 CBR120
WR90 WG16 R100 UBR100 UDR100 UER100 PBR100 PDR100 CBR100
WR112 WG15 R84 UBR84 UDR84 UER84 PAR84 PBR84 PDR84 CBR84
WR137 WG14 R70 UAR70 UDR70 UER70 PAR70 PDR70 CAR70
WR159 WG13 R58 UAR58 UDR58 UER58 PAR58 PDR58 CAR58
WR187 WG12 R48 UAR48 UDR48 UER48 PAR48 PDR48 CAR48
WR229 WG11A R40 UDR40 UER40 PDR40
WR284 WG10 R32 UAR32 UDR32 UER32 PAR32 PDR32 CAR32
WR340 WG9A R26 UDR26 PDR26
WR430 WG8 R22 UDR22 PDR22
WR650 WG6 R14 UDR14 PDR14

Notes
1. Holes in EIC flanges are to accomodate metric hardware
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Twist (with flanges)
Series No: 112

Part Description
UBS offers a custom product line of formed twist sections covering waveguide sizes from WR-28 through WR-650. Insertion loss
is equivalent to straight waveguide sections. Please specify the length.

'MBOHF

3PUBUFE
'MBOHF

Ordering Data $$8

Part number - 112 – X – X – X – X – X – X – X
Series No.
$8
WG Size
Length
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting
Twist Angle

'MBOHF
 3FGFSFODF
'MBOHF

Flange Configuration Specifications

Flange Type C - Cover Minimum

G - Groove Size Frequency Dimension
CHOKE GHz Available
CMR for 90° Twist
CPR(F, G) WR28 26.50 - 40.00 1.00
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 1.00
T2 - Threaded
WR42 18.00 - 26.00 1.00
A - Alternating
WR51 15.00 - 22.00 1.00
Twist Angle 1 - 90° Twist
WR62 12.40 - 18.00 1.50
2 - 45° Twist
WR75 10.00 - 15.00 1.50
Electrical Specification WR90 8.20 - 12.40 1.50
WR112 7.05 - 10.00 2.00
VSWR < 1.06 -1.10 (length dependent)
WR137 5.85 - 8.20 2.00
WR159 4.09 - 7.05 3.00
STANDARD FINISH: is electroless corrosion protection for the metal sur-
face. Non standard configurations and finishes (Silver, Nickel, Cadmi- WR187 3.95 - 5.85 3.00
um plating) are available upon request. Waveguide sizes up to WR-650 WR229 3.30 - 4.90 3.00
available. Contact our sales department with your requirements. WR284 2.60 - 3.95 6.00
WR340 2.20 - 3.30 8.00
WR430 1.70 - 2.60 9.00
WR650 1.12 - 1.70 15.00
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Transitions
Series No: 113

Part Description
UBS standard product line of fabricated waveguide transitions are designed to interconnect different size waveguide compo-
nents in a minimum space. The standard rectangular sizes from WR-28 through WR-284 are shown on this data sheet.

Ordering Data
Part number - 113 – X/X – X – X – X – X Flange 2

Series No.
WG Size
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting

Flange 1

Flange Configuration Specifications

Flange Type C - Cover

G - Groove Size Frequency
CHOKE GHz
CMR WR28/34 26.50 - 33.00
CPR(F, G)
WR34/42 22.00 - 26.50
Flange Mounting Holes T1 - Through Holes WR42/51 18.00 - 22.00
T2 - THreaded
A - Alternating WR51/62 15.00 - 18.00
WR62/75 12.40 - 15.00
WR75/90 10.00 - 12.40
WR90/112 8.20 - 10.00
Electrical Specification WR112/137 7.05 - 10.00
WR137/159 5.85 - 8.20
VSWR 1.10 max.
WR159/187 4.09 - 7.05

STANDARD FINISH: is electroless corrosion protection for the metal sur- WR187/229 3.95 - 5.85
face. Non standard configurations and finishes (Silver, Nickel, Cadmi- WR229/284 3.30 - 4.90
um plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Shorting Plates
Series No: 114

Part Description
Unique Broadband Systems offers a line of shorting plates to mate with standard waveguide flanges. In addition to the popular
standard flanges listed, UBS offers a more complete line of industry standard flange styles upon request.

Ordering Data
Part number - 114 – X – X – X – O
Series No.
WG Size
Flange
Flange Mounting
Add “O” for Offset

Flange Configuration Specifications

Flange Type C - Cover

G - Groove Size C G CMR CPR
CMR WR28 • •
CPR(F, G)
WR34 • •
Flange Mounting Holes T1 - Through Holes WR42 • •
T2 - THreaded
A - Alternating WR51 • •
WR62 • •
WR75 • • • •
WR90 • • • •
WR112 • • • •
WR137 • • • •
WR159 • • • •
WR187 • • • •
WR229 • • • •
WR284 • • • •
WR340 • • • •
WR430 • • • •
WR650 • • • •
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Pressure Windows
Series No: 115

Part Description

from 0.0625” material and are designed to be used up to a maximum pressure of 10 psi (3-5 psi typical). These pressure windows
are for low power Tx/ Rx application (below 250 Watts average power) and do not have pressure inlets or gasket grooves. Holes
for attachment hardware are drilled clear.

Ordering Data
Part number - 115 – X – X – X
Series No.
WG Size
Flange Face 1
Flange Face 2

Face 2

Flange Type C - Cover

G - Groove Size C G CHOKE CMR CPR
CHOKE WR28 • • •
CMR
WR34 • • •
CPR (F, G)
WR42 • • •
WR51 • • •
VSWR < 1.1 max. WR62 • • •
WR75 • • • • •
WR90 • • • • •
WR112 • • • • •
WR137 • • • • •
WR159 • • • • •
WR187 • • • • •
WR229 • • • • •
WR284 • • • • •
WR340 • • • • •
WR430 • • • • •
WR650 • • • • •
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Pressure Inserter
Series No: 116

Part Description

from aluminum alloy that has been chemically cleaned and coated to prevent corrosion. The pressure inlet has 1/8” female pipe
thread and is shipped with a sealed 1/8” male pipe thread plug installed. Thickness 0.375”. Holes for attachment hardware are
drilled clear.

Ordering Data
Part number - 116 – X – X
Series No.
WG Size
Flange

Flange Type C - Cover

G - Groove Size C G CHOKE CMR CPR
CHOKE WR28 • • •
CMR
WR34 • • •
CPR (F, G)
WR42 • • •
WR51 • • •

VSWR WR62 • • •
< 1.1 max.
WR75 • • • • •
WR90 • • • • •
WR112 • • • • •
WR137 • • • • •
WR159 • • • • •
WR187 • • • • •
WR229 • • • • •
WR284 • • • • •
WR340 • • • • •
WR430 • • • • •
WR650 • • • • •
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Brackets and Hangers, Flange Hardware Kits
Series No: 117

Part Description

tion and are suitable for both indoor and outdoor applications. Available in single, double, triple or quadruple waveguide

Ordering Data
Part number - 117 – X – X – X
1 WG 2 WGs
Series No. 3 WGs
WG Size
Number of Waveguides
Hardware

Note
Diagram shown with optional thread rod kit
Wavguide sizes up to WER-650 are available. Contact
our sales department with your requirements.

4 WGs

WG = Waveguides

Flange Hardware Kit

supplied are half, full or double thickness as required.

Ordering Data
Part number - 117 – USFHK – X
Series No.
Flange
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Twistable Flexible Waveguide
Series No: 118

Part Description
UBS offers a line of twistable flexible or flexible waveguide sections. These sections are manufactured from spiral-wound silver
plated conductors covered with a protective, pressure tight black neoprene or silicone rubber jacket. All standard waveguide
flanges are available. In addition to the popular standard line of flanges listed, UBS offers a more complete line of industry stan-
dard flange styles upon request. Please specify the length that is required.

Ordering Data

Part number - 118 – X – X – X – X – X – X – X – X

Series No.
WG Size
WG Type
Length
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting
Hardware

Flange Configuration
Flange Type C - Cover Hardware 1 - Required
G - Groove 0 - Not Required
CHOKE Twistable Flexible A
CMR
Flexible B
CPR(F, G)
Flange Mounting Holes T1 - Through Holes
T2 - Threaded
A - Alternating

Specifications
MATCHING OPERATIONAL NOMINAL TEST MAXIMUM IL MAXIMUM MAXIMUM Power
Size C G CHOKE CMR CPR WG INTERNAL FREQUENCY FREQ. FOR ATTENUATION VSWR VSWR Handling
DIMENSIONS BAND (GHz) ATTENUATION (dB/ft) (W)
(in) (GHz) < 36” > < 36” >
WR28 • • • 0.280 x 0.140 26.50 - 40.00 34.00 1.00 1.30 - 36” max 75
WR42 • • • 0.420 x 0.170 18.00 - 26.50 22.00 0.70 1.18 1.23 1.20 1.25 100
WR51 • • • 0.510 x 0.255 15.00 - 22.00 18.50 0.55 1.15 1.18 1.17 1.20 400
WR62 • • • 0.622 x 0.311 12.40 - 18.00 14.00 0.28 1.10 1.13 1.13 1.16 400
WR75 • • • 0.750 x 0.375 10.00 - 15.00 13.70 0.18 1.08 1.10 1.10 1.13 750
WR90 • • • • • 0.900 x 0.400 8.20 - 12.40 9.40 0.15 1.07 1.10 1.10 1.13 1000
WR112 • • • • • 1.122 x 0.497 7.05 - 10.00 9.40 0.12 1.07 1.10 1.10 1.13 1500
WR137 • • • • • 1.372 x 0.622 5.85 - 8.20 6.45 0.09 1.05 1.09 1.09 1.10 2000
WR159 • • • • • 1.590 x 0.795 4.90 - 7.05 5.90 0.08 1.05 1.08 1.08 1.10 2500
WR187 • • • • • 1.872 x 0.872 3.95 - 5.85 4.75 0.05 1.05 1.07 1.07 1.10 3000
WR229 • • • • • 2.290 x 1.145 3.30 - 4.90 3.85 0.04 1.05 1.07 - - 4000
WR284 • • • • • 2.840 x 1.340 2.60 - 3.95 3.15 0.04 1.04 1.07 1.07 1.10 4000
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Step Twist
Series No: 119

Part Description
Unique Broadband Systems offers a custom product line of Electroformed step twist covering waveguide sizes from WR-90
through WR-650. Insertion loss is equivalent to straight waveguide sections.

Ordering Data
Flange 2
Part number - 119 – X – X – X – X – X – X – X
Series No.
WG Size
Length
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting
Twist Angle

A
Flange 1

Flange Configuration Specifications

Flange Type C - Cover Minimum Minimum

G - Groove Size Frequency Dimension Dimension
CHOKE GHz Available Available
CMR for 90° Twist for 45° Twist
CPR(F, G) (inches) (inches)
Flange Mounting Holes T1 - Through Holes WR90 8.20 - 12.40 2.00 1.50
T2 - Threaded WR112 7.05 - 10.00 2.00 1.50
A - Alternating
WR137 5.85 - 8.20 2.00 1.50
Twist Angle 1 - 90° Twist WR159 4.09 - 7.05 3.00 2.00
2 - 45° Twist
WR187 3.95 - 5.85 3.00 2.00

Electrical Specification WR229 3.30 - 4.90 3.00 2.00

WR284 2.60 - 3.95 6.00 5.00
VSWR < 1.2 max. WR340 2.20 - 3.30 6.00 5.00
WR430 1.70 - 2.60 6.00 5.00
STANDARD FINISH: is electroless corrosion protection for the metal sur-
WR650 1.12 - 1.70 9.00 8.00
face. Non standard configurations and finishes (Silver, Nickel, Cadmi-
um plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Adapter (Waveguide to Coaxial)
Series No: 121

Part Description
UBS offers a standard product line of precision rectangular waveguide-to-coax adapters covering waveguide sizesfrom WR-28
through WR-430.

Ordering Data
Part number - 121 – X – X – X – X – X
Series No. B
WG Size
Port 1 Connector Style
Port 1 Connector Type
Flange 1
Flange 1 Mounting

A
Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimensions

G - Groove Size Frequency SMA-Type N-Type
CHOKE GHz
A B A B
CMR
CPR(F, G) WR28 26.50 - 40.00 - - - -
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 - - - -
T2 - Threaded
WR42 18.00 - 26.00 1.00 0.75 - -
A - Alternating
WR51 15.00 - 22.00 1.12 0.82 - -
Connector Style WR62 12.40 - 18.00 1.01 0.79 1.67 1.42
Style SMA WR75 10.00 - 15.00 1.01 0.65 1.38 1.09
N WR90 8.20 - 12.40 1.07 0.72 1.65 1.24
2.9 mm (K) WR112 7.05 - 10.00 1.42 1.03 1.88 1.45
3.5 mm
WR137 5.85 - 8.20 1.57 1.03 2.13 1.61
2.4 mm
WR159 4.09 - 7.05 2.00 1.40 2.38 1.76
Type M - Male
F - Female WR187 3.95 - 5.85 3.50 2.80 2.41 1.65
WR229 3.30 - 4.90 3.50 2.70 2.41 1.47
Electrical Specification WR284 2.60 - 3.95 4.00 2.70 2.66 1.46
VSWR < 1.10 typ. WR340 2.20 - 3.30 - - 3.52 2.12
WR430 1.70 - 2.60 - - 4.50 2.62
STANDARD FINISH: is electroless corrosion protection for the metal sur-
face. Non standard configurations and finishes (Silver, Nickel, Cadmi-
um plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (Low Power Precision)
Series No: 131

Part Description
UBS’ standard product line of precision low power terminations use spear load elements for optimum electrical performance.
Maximum power handling capacity:
0.5 watt for waveguide sizes WR-28 to WR-42, 1 watt for WR-51 and WR-62, 2 watts for waveguide sizes WR-75 to WR-650.

Ordering Data
Part number - 131 – X – X – X
Series No.
WG Size
Flange 1
Flange 1 Mounting

Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimensions

G - Groove Size Frequency (inches)
CHOKE GHz A (min)
CMR WR28 26.50 - 40.00 2.50
CPR(F, G)
WR34 22.00 - 33.00 2.50
Flange Mounting Holes T1 - Through Holes WR42 18.00 - 26.00 2.59
T2 - Threaded
A - Alternating WR51 15.00 - 22.00 3.25
WR62 12.40 - 18.00 3.43
Electrical Specification WR75 10.00 - 15.00 4.30
VSWR < 1.02 max. WR90 8.20 - 12.40 4.31
WR112 7.05 - 10.00 3.58
STANDARD FINISH: is electroless corrosion protection for the metal WR137 5.85 - 8.20 4.23
surface. Non standard configurations and finishes (Nickel, Cadmium
WR159 4.09 - 7.05 3.00
plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 3.00
WR229 3.30 - 4.90 7.50
WR284 2.60 - 3.95 11.00
WR340 2.20 - 3.30 11.18
WR430 1.70 - 2.60 -
WR650 1.12 - 1.70 -
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (Low Power)
Series No: 132

Part Description
UBS’ standard product line of precision low power terminations use spear load elements for optimum electrical performance.
Maximum power handling capacity:
0.5 watt for waveguide sizes WR-28 to WR-42, 1 watt for WR-51 and WR-62, 2 watts for waveguide sizes WR-75 to WR-650.

Ordering Data
Part number - 132 – X – X – X
Series No.
WG Size
Flange 1
Flange 1 Mounting

Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimensions

G - Groove Size Frequency (inches)
CHOKE GHz A (min)
CMR WR28 26.50 - 40.00 2.00
CPR(F, G)
WR34 22.00 - 33.00 2.00
Flange Mounting Holes T1 - Through Holes WR42 18.00 - 26.00 3.00
T2 - Threaded
A - Alternating WR51 15.00 - 22.00 3.00
WR62 12.40 - 18.00 4.00
Electrical Specification WR75 10.00 - 15.00 4.00
VSWR < 1.10 max. WR90 8.20 - 12.40 6.00
WR112 7.05 - 10.00 6.00
STANDARD FINISH: is electroless corrosion protection for the metal WR137 5.85 - 8.20 6.50
surface. Non standard configurations and finishes (Nickel, Cadmium
WR159 4.09 - 7.05 7.50
plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 8.50
WR229 3.30 - 4.90 10.00
WR284 2.60 - 3.95 10.50
WR340 2.20 - 3.30 -
WR430 1.70 - 2.60 -
WR510 1.45 - 2.02 -
WR650 1.12 - 1.70 -
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (Low Power short-length)
Series No: 133

Part Description
UBS’ standard product line of precision low power terminations use spear load elements for optimum electrical performance.
Maximum power handling capacity:
0.5 watt for waveguide sizes WR-28 to WR-42, 1 watt for WR-51 and WR-62, 2 watts for waveguide sizes WR-75 to WR-650.

Ordering Data
Part number - 133 – X – X – X
Series No.
WG Size
Flange 1
Flange 1 Mounting

Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimensions

G - Groove Size Frequency (inches)
CHOKE GHz A (min)
CMR WR28 26.50 - 40.00 1.00
CPR(F, G)
WR34 22.00 - 33.00 1.00
Flange Mounting Holes T1 - Through Holes WR42 18.00 - 26.00 1.00
T2 - Threaded
A - Alternating WR51 15.00 - 22.00 1.40
WR62 12.40 - 18.00 1.80
Electrical Specification WR75 10.00 - 15.00 2.00
VSWR < 1.15 max. WR90 8.20 - 12.40 3.00
WR112 7.05 - 10.00 3.28
STANDARD FINISH: is electroless corrosion protection for the metal WR137 5.85 - 8.20 3.50
surface. Non standard configurations and finishes (Nickel, Cadmium
WR159 4.09 - 7.05 3.50
plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 4.00
WR229 3.30 - 4.90 5.00
WR284 2.60 - 3.95 6.00
WR340 2.20 - 3.30 -
WR430 1.70 - 2.60 -
WR510 1.45 - 2.02 -
WR650 1.12 - 1.70 -
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (Medium Power)
Series No: 134

Part Description
UBS’ standard product line of medium power terminations are constructed of normal wall waveguide tubing and extruded heat
sink material. The load elements are custom ground silicon carbide spears tapered for an optimum VSWR response of 1.10 max.
Maximum power handling capacity:
25 watts for waveguide sizes WR-28 to WR-62, 50 watts for waveguide sizes WR-75 to WR-430.

Ordering Data
Part number - 134 – X – X – X
Series No.
WG Size



Flange 1
Flange 1 Mounting A

'MBOHF
 B

Flange Configuration Specifications

Flange Type C - Cover Size Frequency Dimensions

G - Groove GHz (inches)
CHOKE A B C
CMR
WR28 26.50 - 40.00 5.00 2.30 3.40
CPR(F, G)
WR34 22.00 - 33.00 5.00 2.30 3.40
Flange Mounting Holes T1 - Through Holes
T2 - Threaded WR42 18.00 - 26.00 5.00 2.30 3.40
A - Alternating WR51 15.00 - 22.00 5.00 2.30 3.40
WR62 12.40 - 18.00 5.00 2.30 3.40
Electrical Specification WR75 10.00 - 15.00 7.00 2.30 3.40
VSWR < 1.10 max. WR90 8.20 - 12.40 7.00 2.30 3.40
WR112 7.05 - 10.00 7.00 2.30 3.40
STANDARD FINISH: is electroless corrosion protection for the metal
WR137 5.85 - 8.20 7.00 2.30 3.40
surface. Non standard configurations and finishes (Nickel, Cadmium
plating) are available upon request. Waveguide sizes up to WR-650 WR159 4.09 - 7.05 8.50 2.30 3.40
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 8.50 2.30 3.40
WR229 3.30 - 4.90 9.00 2.30 3.40
WR284 2.60 - 3.95 12.00 2.30 3.40
WR340 2.20 - 3.30 - - -
WR430 1.70 - 2.60 - - -
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (Medium Power, short-length)
Series No: 135

Part Description
UBS’ standard product line of medium power terminations are constructed of normal wall waveguide tubing and extruded heat
sink material. The load elements are custom ground silicon carbide spears tapered for an optimum VSWR response of 1.10 max.
Maximum power handling capacity:
25 watts for waveguide sizes WR-28 to WR-62, 50 watts for waveguide sizes WR-75 to WR-430.

Ordering Data
Part number - 135 – X – X – X
Series No.
WG Size
Flange 1
Flange 1 Mounting C

Flange 1 A

Flange Configuration Specifications

Flange Type C - Cover Size Frequency Dimensions Average

G - Groove GHz (inches) Power
CHOKE A B C Watts
CMR
WR28 26.50 - 40.00 3.00 2.30 3.40 50
CPR(F, G)
WR34 22.00 - 33.00 3.00 2.30 3.40 50
Flange Mounting Holes T1 - Through Holes
T2 - Threaded WR42 18.00 - 26.00 3.00 2.30 3.40 80
A - Alternating WR51 15.00 - 22.00 3.00 2.30 3.40 100
WR62 12.40 - 18.00 3.00 2.30 3.40 150
Electrical Specification WR75 10.00 - 15.00 4.00 2.30 3.40 80
VSWR < 1.15 max. WR90 8.20 - 12.40 5.00 2.30 3.40 150
WR112 7.05 - 10.00 5.00 2.30 3.40 250
STANDARD FINISH: is electroless corrosion protection for the metal sur-
WR137 5.85 - 8.20 5.00 2.30 3.40 350
face. Non standard configurations and finishes (Silver, Nickel, Cadmi-
um plating) are available upon request. Waveguide sizes up to WR-650 WR159 4.09 - 7.05 5.00 2.30 3.40 300
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 5.50 2.30 3.40 450
WR229 3.30 - 4.90 6.00 2.30 3.40 300
Notes
WR284 2.60 - 3.95 7.50 2.30 3.40 500
1. All dimensions are for reference only
WR340 2.20 - 3.30 - - - 700
2. Depending on waveguide size and power requirements, the
WR430 1.70 - 2.60 - - - 450
termination may require a heatsink. If required, UBS will advise
and quote the termination with the heatsink included
3. All heatsinks selected based on natural convection cooling.
For Forced air cooling, contact factory
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Termination (High Power)
Series No: 136

Part Description
UBS standard product line of short length medium power terminations are constructed similar to the medium power terminations.
Maximum power handling capacity:
50 watts for waveguide sizes WR-28 to WR-62, 200 watts for waveguide sizes WR-75 to WR-430.

Ordering Data
Part number - 136 – X – X – X
Series No.
WG Size
Flange 1
Flange 1 Mounting
A

Flange 1 B

Flange Configuration Specifications

Flange Type C - Cover Size Frequency Dimensions Average

G - Groove GHz (inches) Power
CHOKE A B C Watts
CMR
WR28 26.50 - 40.00 5.00 2.30 3.40 50
CPR(F, G)
WR34 22.00 - 33.00 5.00 2.30 3.40 50
Flange Mounting Holes T1 - Through Holes
T2 - Threaded WR42 18.00 - 26.00 5.00 2.30 3.40 150
A - Alternating WR51 15.00 - 22.00 5.00 2.30 3.40 110
WR62 12.40 - 18.00 5.00 2.30 3.40 200
Electrical Specification WR75 10.00 - 15.00 8.00 5.20 5.15 200
VSWR < 1.10 max. WR90 8.20 - 12.40 8.00 5.20 5.15 225
WR112 7.05 - 10.00 8.00 5.20 5.15 425
STANDARD FINISH: is electroless corrosion protection for the metal sur-
WR137 5.85 - 8.20 8.00 5.20 5.15 500
face. Non standard configurations and finishes (Silver, Nickel, Cadmi-
um plating) are available upon request. Waveguide sizes up to WR-650 WR159 4.09 - 7.05 9.00 5.20 5.15 625
available. Contact our sales department with your requirements. WR187 3.95 - 5.85 9.50 5.20 5.15 750
WR229 3.30 - 4.90 12..00 5.20 5.15 1000
Notes
WR284 2.60 - 3.95 13.00 5.20 5.15 1200
1. All dimensions are for reference only
WR340 2.20 - 3.30 - - - -
2. Depending on waveguide size and power requirements, the
WR430 1.70 - 2.60 - - - -
termination may require a heatsink. If required, UBS will advise
and quote the termination with the heatsink included
3. All heatsinks selected based on natural convection cooling.
For Forced air cooling, contact factory
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Broadwall Directional Coupler
Series No: 141

Part Description
UBS offers a standard product line of multi-hole waveguide broadwall directional couplers covering waveguide sizes from WR-28
through WR-284. The optimum electrical characteristics of high directivity and coupling flatness are achieved utilizing a precision
machined Tchebyscheff coupling hole distribution and a precision ground tapered load element in the secondary arm.

Ordering Data
Part number - 141 – X – X – X – X – X – X – X – X Flange 2
Flange 3
Series No.
WG Size C 0VUQVU

Coupling
Flange 1
Flange 1 Mounting
Flange 2 B
Flange 2 Mounting
Flange 3 Flange 1
A
Flange 3 Mounting
*OQVU

Flange Configuration Specifications

Flange Type C - Cover Dimension

G - Groove Size Frequency (inches)
CHOKE GHz B C
CMR
CPR(F, G) WR28 26.50 - 40.00 1.00 1.20
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 1.00 1.50
T2 - Threaded WR42 18.00 - 26.00 1.00 1.50
A - Alternating WR51 15.00 - 22.00 1.75 1.50
WR62 12.40 - 18.00 1.95 1.50
WR75 10.00 - 15.00 1.95 2.00
WR90 8.20 - 12.40 2.00 2.00
Electrical Specification
WR112 7.05 - 10.00 2.00 2.00
VSWR 1.08 max. primary line WR137 5.85 - 8.20 2.20 2.50
1.15 max. secondary line WR159 4.09 - 7.05 2.50 2.80
Coupling ± 1.0 dB mean WR187 3.95 - 5.85 2.50 2.80
Directivity 40 dB min. WR229 3.30 - 4.90 3.00 2.80
WR284 2.60 - 3.95 3.00 3.00
STANDARD FINISH: is electroless corrosion protection for the metal Coupling
surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
6,10, 20, 30, 40 and 50 dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Dual Broadwall Directional Coupler
Series No: 142

Part Description
UBS offers a standard product line of dual arm multi-hole broadwall directional couplers covering waveguide sizes from WR-28
through WR-284 and configured similar to the single arm models.

Ordering Data 0VUQVU

Flange 2
Part number - 142 – X – X – X – X – X – X – X – X – X – X Flange 3 B

C
Series No.
WG Size
A
Coupling
Flange 4
Flange 1 4U ZMF
 Flange 1
Flange 1 Mounting
0VUQVU 4U ZMF


Flange 2 0VUQVU
Flange 3

Flange 2 Mounting Flange 2

Flange 2 B B
Flange 3 Flange 3 Flange 4
Flange 3 Mounting C
A A
Flange 4
C
Flange 4 Mounting
Flange 1
Flange 4
Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimension

G - Groove Size Frequency (inches)
CHOKE GHz C
CMR
CPR(F, G) WR28 26.50 - 40.00 1.20
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 1.50
T2 - Threaded WR42 18.00 - 26.00 1.50
A - Alternating WR51 15.00 - 22.00 1.50
WR62 12.40 - 18.00 1.50
WR75 10.00 - 15.00 2.00
WR90 8.20 - 12.40 2.00
Electrical Specification
WR112 7.05 - 10.00 2.00
VSWR 1.08 max. primary line WR137 5.85 - 8.20 2.50
1.15 max. secondary line WR159 4.09 - 7.05 2.80
Coupling ± 1.0 dB mean WR187 3.95 - 5.85 2.80
Directivity 35 dB min. WR229 3.30 - 4.90 2.80
WR284 2.60 - 3.95 3.00
STANDARD FINISH: is electroless corrosion protection for the metal Coupling
surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
6,10, 20, 30, 40 and 50 dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Broadwall Directional Coupler
Series No: 143

Part Description
UBS offers a standard product line of multi-hole coax secondary broadwall couplers covering waveguide sizes from WR-28
through WR-284. The optimum electrical characteristics of high directivity and coupling flatness are achieved utilizing a precision
machined Tchebyscheff coupling hole distribution and a precision ground tapered load element in the secondary arm.

Ordering Data *OQVU

Part number - 143 – X – X – X – X – X – X – X – X Flange 1

Series No.
WG Size
Coupling
Port 1 Commector Style
Port 1 Connector Type
Flange 1 A 0VUQVU
Flange 1 Mounting
Flange 2
Flange 2 Mounting

Flange 2

Flange Configuration Specifications

Flange Type C - Cover

G - Groove Size Frequency
CHOKE, CMR, CPR(F, G) GHz
Flange Mounting Holes T1 - Through Holes WR28 26.50 - 40.00
T2 - Threaded WR34 22.00 - 33.00
A - Alternating
WR42 18.00 - 26.00

Port Configuration WR51 15.00 - 22.00

WR62 12.40 - 18.00
Connector Style SMA, N, 2.9 mm(K),
WR75 10.00 - 15.00
3.5 mm, 2.4mm
WR90 8.20 - 12.40
Connector Type M - Male, F - Female
WR112 7.05 - 10.00
Electrical Specification WR137 5.85 - 8.20

VSWR WR159 4.09 - 7.05

1.08 max. primary line
1.30 max. secondary line WR187 3.95 - 5.85
Coupling ± 1.0 dB mean WR229 3.30 - 4.90

Directivity 35 dB min. WR284 2.60 - 3.95

STANDARD FINISH: is electroless corrosion protection for the metal Coupling

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
6,10, 20, 30, 40 and 50 dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales Note
department with your requirements.
For 60 dB coupling, an attenuator will be used on coaxial port and
coupling mean is ±1.0 dB frequency response.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Dual Broadwall Directional Coupler
Coax Secondaries Series No: 144

Part Description
UBS offers a standard product line of dual arm multi-hole coax dual directional couplers covering waveguide sizes from WR-28
through WR-284 and configured similar to the single arm models.

Port 1
0VUQVU
Ordering Data Style 1
B
Flange 2
Part number - 144 – X – X – X – X – X – X – X – X – X – X *OQVU
Series No.
WG Size A 0VUQVU
Coupling Style 2
Flange 2
Port 1 Commector Style Flange 1 Port 2 Port 1
Port 1 Connector Type
Port 1 Commector Style B
Port 1 Connector Type 0VUQVU Port 1 A
Flange 1 Port 2
Flange 2 *OQVU
Flange 1 Mounting
Flange 2 B
Flange 1
Flange 2 Mounting A Port 2

Style 3 *OQVU
Flange 1
Flange Configuration Specifications

Flange Type C - Cover

G - Groove Size Frequency
CHOKE, CMR, CPR(F, G) GHz
Flange Mounting Holes T1 - Through Holes WR28 26.50 - 40.00
T2 - Threaded WR34 22.00 - 33.00
A - Alternating
WR42 18.00 - 26.00

Port Configuration (Style 3 Only) WR51 15.00 - 22.00

WR62 12.40 - 18.00
Connector Style SMA, N, 2.9 mm(K),
WR75 10.00 - 15.00
3.5 mm, 2.4mm
WR90 8.20 - 12.40
Connector Type M - Male, F - Female
WR112 7.05 - 10.00
Electrical Specification WR137 5.85 - 8.20

VSWR WR159 4.09 - 7.05

1.08 max. primary line
1.30 max. secondary line WR187 3.95 - 5.85
Coupling ± 1.0 dB mean WR229 3.30 - 4.90
± 0.50 dB freq. response WR284 2.60 - 3.95
Directivity 35 dB min.
Coupling
STANDARD FINISH: is electroless corrosion protection for the metal 10, 20, 30, 40 and 50 dB
surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
Note
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales For Connector Style, contact factory for 2.9mm, 3.5mm, and 2.4mm
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Cross Guide Coupler
Series No: 145

Part Description
UBS directional crossguide couplers utilize an ultra-flat coupling technique that exhibits high power handling characteristics, while
maintaining optimum electrical performance parameters over the full waveguide bandwidth.

Ordering Data
A
Part number - 145 – X – X – X – X – X – X – X – X – X – X – X – X – X B Flange 3
Series No. *OQVU

WG Size
Coupling (2) (1) B
0VUQVU

Body Style A
B Flange 3 A
Port 1 Commector Style Flange 2
Flange 1
Port 1 Connector Type
Flange 1 D Flange 4
*OQVU
Flange 1 Mounting 0VUQVU

Flange 2
Flange 2 Mounting
Flange 2
C
A
(3)
Flange 1 Flange 1 B Port
Flange 1 Mounting
Flange 2 D
*OQVU
Flange 2 Mounting 0VUQVU

C
Flange 2 Flange 1
Flange Configuration Specifications

Flange Type C - Cover Dimensions (inches)

G - Groove Size Frequency
A B C D
CHOKE, CMR, CPR(F, G) GHz
Flange Mounting Holes T1 - Through Holes WR28 26.50 - 40.00 3.00 1.50 3.50 0.75
T2 - Threaded WR34 22.00 - 33.00 3.00 1.50 3.50 0.75
A - Alternating
WR42 18.00 - 26.00 3.00 1.50 3.50 0.75

Port Configuration (Style 3 Only) WR51 15.00 - 22.00 3.00 1.50 3.50 0.75
WR62 12.40 - 18.00 3.00 1.50 3.50 0.75
Connector Style SMA, N, 2.9 mm(K),
WR75 10.00 - 15.00 3.00 1.50 3.80 1.00
3.5 mm, 2.4mm
WR90 8.20 - 12.40 3.50 1.75 3.80 1.00
Connector Type M - Male, F - Female
WR112 7.05 - 10.00 4.00 2.00 5.20 1.25
Electrical Specification WR137 5.85 - 8.20 4.00 2.00 4.50 2.00

VSWR WR159 4.09 - 7.05 5.00 2.50 6.00 2.25

1.08 max. primary line
1.30 max. secondary line WR187 3.95 - 5.85 5.50 2.75 6.50 2.25
Coupling ±1.0dB max for 10% of WG Band WR229 3.30 - 4.90 6.00 3.00 8.00 2.50

Directivity 20 dB min. WR284 2.60 - 3.95 7.00 3.50 10.00 3.00

STANDARD FINISH: is electroless corrosion protection for the metal Coupling

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura- 20, 30, 40, 50 and 60 dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales Note
department with your requirements. For connector style, contact factory for 2.9 mm(K), 3.5 mm, 2.4 mm
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Dual Cross Guide Coupler
Series No: 145D

Part Description
UBS directional crossguide couplers utilize an ultra-flat coupling technique that exhibits high power handling characteristics, while
maintaining optimum electrical performance parameters.

Ordering Data

Flange 3 Flange 1

Part number - 145 – X – X – X – X – X – X – X – X – X – X – X – X – X Flange 4

Series No.
WG Size
Flange 2
Coupling Flange 3
D
Body Style Flange 4
A

C
Port 1 Commector Style B
Port 1 Connector Type Flange 3
Flange 1
Flange 1 Flange 4
Flange 1 Mounting 


Port 1
Flange 2
Port 2 Flange 1
Flange 2 Mounting
Flange 1 Flange 2 A
B
B
Flange 1 Mounting D

Flange 2 C
Flange 2 Mounting Flange 2 A
D

Flange Configuration Specifications

Flange Type C - Cover Dimensions (inches)

G - Groove Size Frequency
A B C D
CHOKE, CMR, CPR(F, G) GHz
Flange Mounting Holes T1 - Through Holes WR28 26.50 - 40.00 3.00 1.50 3.50 0.75
T2 - Threaded WR34 22.00 - 33.00 3.00 1.50 3.50 0.75
A - Alternating
WR42 18.00 - 26.00 3.00 1.50 3.50 0.75

Port Configuration (Style 3 Only) WR51 15.00 - 22.00 3.00 1.50 3.50 0.75
WR62 12.40 - 18.00 3.00 1.50 3.50 0.75
Connector Style SMA, N, 2.9 mm(K),
WR75 10.00 - 15.00 3.00 1.50 3.80 1.00
3.5 mm, 2.4mm
WR90 8.20 - 12.40 3.50 1.75 3.80 1.00
Connector Type M - Male, F - Female
WR112 7.05 - 10.00 4.00 2.00 5.20 1.25
Electrical Specification WR137 5.85 - 8.20 4.00 2.00 4.50 2.00

VSWR WR159 4.09 - 7.05 5.00 2.50 6.00 2.25

1.08 max. primary line
1.30 max. secondary line WR187 3.95 - 5.85 5.50 2.75 6.50 2.25
Coupling ±1.0dB max for 10% of WG Band WR229 3.30 - 4.90 6.00 3.00 8.00 2.50

Directivity 20 dB min. WR284 2.60 - 3.95 7.00 3.50 10.00 3.00

STANDARD FINISH: is electroless corrosion protection for the metal Coupling

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura- 20, 30, 40, 50 and 60 dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales Note
department with your requirements. For connector style, contact factory for 2.9 mm(K), 3.5 mm, 2.4 mm
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Magic Tee
Series No: 146

Part Description
Unique Broadband Systems offers a standard product line of isolated four-port hybrid power dividers covering waveguide sizes
from WR-28 through WR-340.

Ordering Data
B
Part number - 146 – X – X – X – X – X – X – X – X – X Flange 1
Series No. E Arm
WG Size
Flange 1 Flange 4
Co-linear
Flange 1 Mounting
Flange 2 A
Flange 2 Mounting
Flange 3 Flange 2
Flange 3 Mounting H Arm
Flange 4
Flange 4 Mounting Flange 3
Co-linear
B

Flange Configuration Specifications

Flange Type C - Cover Dimension

G - Groove Size Frequency (inches)
CHOKE GHz A B
CMR
CPR(F, G) WR28 26.50 - 40.00 2.50 1.25
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 2.50 1.25
T2 - Threaded WR42 18.00 - 26.00 2.50 1.25
A - Alternating WR51 15.00 - 22.00 2.50 1.25
WR62 12.40 - 18.00 2.50 1.25
WR75 10.00 - 15.00 2.50 1.25
WR90 8.20 - 12.40 2.50 1.25
Electrical Specification
WR112 7.05 - 10.00 3.50 1.25
VSWR 1.3 nom. WR137 5.85 - 8.20 4.50 2.25
1.5 max. WR159 4.09 - 7.05 5.00 2.50
WR187 3.95 - 5.85 5.00 2.50
Isolation
WR229 3.30 - 4.90 6.00 3.00
E to H 30 dB min. WR284 2.60 - 3.95 6.00 3.00
Co-Linear 15 dB min. WR340 2.20 - 3.30 - -
Power Split Variation +/- 0.3 dB

STANDARD FINISH: is electroless corrosion protection for the metal

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Loop Coupler
Series No: 147

Part Description
UBS series of waveguide loop couplers offers a new dimension in high directivity couplers. They are available over a coupling
range of 20-70 dB. These couplers are engineered to perform with a minimum of waveguide length making them the smallest of
any waveguide couplers available.

Ordering Data
Part number - 147 – X – X – X – X – X – X – X – X Ports 1 and 2

Series No.
WG Size A
Coupling
Port 1,2 Commector Style
Port 1,2 Connector Type
Flange 1
Flange 1 Mounting
Flange 2 Flange 2
Flange 2 Mounting

Flange 1

Flange Configuration Specifications

Flange Type C - Cover

G - Groove Size Frequency Dimension (inches)
CHOKE, CMR, CPR(F, G) GHz A
Flange Mounting Holes T1 - Through Holes WR90 8.20 - 12.40 2.50
T2 - Threaded WR102 7.00 - 11.00 2.50
A - Alternating
WR112 7.05 - 10.00 2.50

Port Configuration WR137 5.85 - 8.20 3.50

WR159 4.09 - 7.05 3.50
Connector Style SMA, N, 2.9 mm(K),
WR187 3.95 - 5.85 3.50
3.5 mm, 2.4mm
WR229 3.30 - 4.90 5.00
Connector Type M - Male, F - Female
WR284 2.60 - 3.95 5.00
Electrical Specification WR340 2.20 - 3.30 -

VSWR - Mainline WR430 1.70 - 2.60 5.00

1.05 max
WR650 1.12 - 1.70 -
Coupling ± 1dB max for 20% of WG Band
Directivity 30 dB typ. for 10% of WG Band Coupling
25 dB typ. for 20% of WG Band 20, 30, 40 50, 60 and 70 dB

STANDARD FINISH: is electroless corrosion protection for the metal

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Power Samplers
Series No: 148

Part Description
Unique Broadband Systems power samplers offers a low cost approach to monitoring power in matched waveguide systems
where high directi-vity is not a concern. Standard coupling values are available from 20 dB to 90 dB with coupling flatness
maintained at +/- 1.0 dB.

Ordering Data
Part number - 148 – X – X – X – X – X – X – X – X
4UZMF
 A Flange 2
Series No.
WG Size
Coupling
Port 1 Commector Style
Port 1 Connector Type
Flange 1
Flange 1 Mounting
Flange 2 Port 1
Flange 2 Mounting Flange 1

Flange Configuration Specifications

Flange Type C - Cover Dimension (inches)

G - Groove Size Frequency
A B
CHOKE, CMR, CPR(F, G) GHz
Flange Mounting Holes T1 - Through Holes WR28 26.50 - 40.00 2.00 0.75
T2 - Threaded WR34 22.00 - 33.00 2.00 0.75
A - Alternating
WR42 18.00 - 26.00 2.00 0.75

Port Configuration WR51 15.00 - 22.00 2.00 0.75

WR62 12.40 - 18.00 2.00 0.75
Connector Style SMA, N, 2.9 mm(K),
WR75 10.00 - 15.00 2.00 0.75
3.5 mm, 2.4mm
WR90 8.20 - 12.40 2.00 0.75
Connector Type M - Male, F - Female
WR112 7.05 - 10.00 2.00 0.75
Electrical Specification WR137 5.85 - 8.20 2.50 0.75

VSWR - Mainline WR159 4.09 - 7.05 2.50 -

1.10 max.
WR187 3.95 - 5.85 3.00 -
WR229 3.30 - 4.90 3.00 -
WR284 2.60 - 3.95 3.00 -

STANDARD FINISH: is electroless corrosion protection for the metal Coupling

surface, plus “Admiralty Gray” epoxy top coat. Non standard configura-
20 to 90dB
tions and finishes (Silver, Nickel, Cadmium plating) are available upon
request. Waveguide sizes up to WR-650 available. Contact our sales
department with your requirements.
 WAVEGUIDE AND COAXIAL

Unique Broadband Sys tems Ltd .

Fixed Attenuator
Series No: 152

Part Description
UBS offers a series of rectangular waveguide precision attenuators covering waveguide sizes from WR-28 through WR-284. The
assembly construction includes a precision ground observing elements for optimum electrical performance. Attenuation flatness
is +/- 0.5 dB over the 30% bandwidth and +/- 1.5 dB Full Band. The max. power rating for all waveguide sizes is 1 watt WR-28 to
WR-62.
Ordering Data
Part number - 152 – X – X – X – X – X – X
Series No.
WG Size
Attenuation
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting

Flange Configuration Specifications

Flange Type C - Cover Minimum

G - Groove Size Frequency Dimension
CHOKE GHz
CMR
CPR(F, G) WR28 26.50 - 40.00 2.00
Flange Mounting Holes T1 - Through Holes WR34 22.00 - 33.00 2.00
T2 - Threaded
WR42 18.00 - 26.00 2.00
A - Alternating
WR51 15.00 - 22.00 2.50
WR62 12.40 - 18.00 2.50
WR75 10.00 - 15.00 3.00
Electrical Specification WR90 8.20 - 12.40 3.00
WR112 7.05 - 10.00 3.50
Attenuation 1 - 60 dB
WR137 5.85 - 8.20 3.50
VSWR < 1.10 max. WR159 4.09 - 7.05 3.50
WR187 3.95 - 5.85 4.00
STANDARD FINISH: is electroless corrosion protection for the metal sur- WR229 3.30 - 4.90 4.00
face. Non standard configurations and finishes (Silver, Nickel, Cadmi-
WR284 2.60 - 3.95 4.00
um plating) are available upon request. Waveguide sizes up to WR-650
available. Contact our sales department with your requirements.
 PASSIVE COMPONENTS

Unique Broadband Systems Ltd.

Horn Antenna Series
Series No: 155

Part Description
UBS offers a series of precision horn antennas covering waveguide sizes from WR-28 through WR-650. The assembly construction
includes precision ground observing elements for optimum electrical performance.

Ordering Data

Part number - 155 – X – X – X – X

Series No.
WG Size
Gain
Flange Type
Flange Mounting

Flange Configuration Specifications

Flange Type C - Cover Size Frequency Dimensions (inches)

G - Groove GHz
10 dB 15 dB 20 dB
CHOKE
CMR A B C A B C A B C
CPR WR28 26.50 - 40.00
CPR(F, G)
WR34 22.00 - 33.00
Flange Mounting Holes T1 - Through Holes
WR42 18.00 - 26.00 1.24 0.62 0.43 2.35 1.15 0.84 4.09 2.13 1.56
T2 - Threaded
A - Alternating WR51 15.00 - 22.00
WR62 12.40 - 18.00 1.15 1.10 0.62 2.41 1.67 1.32 5.92 2.88 2.11
WR75 10.00 - 15.00 1.95 1.62 0.93 4.65 2.23 1.32 8.32 4.04 2.97

Electrical Specification WR90 8.20 - 12.40 2.07 1.51 1.12 5.44 2.63 1.92 10.2 5.16 3.75
WR112 7.05 - 10.00
VSWR 1.15 max. WR137 5.85 - 8.20 3.12 2.03 1.44 6.53 3.45 2.51 12.33 6.71 4.70
Gain 10 dB, 15 dB, 20 dB WR159 4.09 - 7.05

Gain Variance ± 2.0 dB WR187 3.95 - 5.85

WR229 3.30 - 4.90
WR284 2.60 - 3.95
STANDARD FINISH: is electroless corrosion protection
WR340 2.20 - 3.30
for the metal surface. Non standard configurations
and finishes (Silver, Nickel, Cadmium plating) are WR430 1.70 - 2.60
available upon request. Waveguide sizes up to WR- WR650 1.12 - 1.70
650 available. Contact our sales department with
your requirements.

VER 1.0 October 06, 2009

 PASSIVE COMPONENTS

Unique Broadband Systems Ltd.

DC Block
Series No: 156

Part Description
UBS offers a series of DC Blocks covering waveguide sizes from WR-28 through WR-650. The assembly construction includes precision
ground elements for optimum electrical performance.

Ordering Data

Part number - 156 – X – X – X – X – X – X

Series No.
WG Size
Length *
Flange 1
Flange 1 Mounting
Flange 2
Flange 2 Mounting

* Customer requested Length

(contact Sales for more information)

Flange Configuration Specifications

Flange Type C - Cover Size Frequency C G CHOKE CMR CPR

G - Groove GHz
CHOKE WR28 26.50 - 40.00 • • •
CMR
WR34 22.00 - 33.00 • • •
CPR
CPR(F, G) WR42 18.00 - 26.00 • • •

Flange Mounting Holes T1 - Through Holes WR51 15.00 - 22.00 • • •

T2 - Threaded WR62 12.40 - 18.00 • • •
A - Alternating WR75 10.00 - 15.00 • • • • •
WR90 8.20 - 12.40 • • • • •
WR112 7.05 - 10.00 • • • • •
Electrical Specification WR137 5.85 - 8.20 • • • • •
WR159 4.09 - 7.05 • • • • •
VSWR 1.15 max. WR187 3.95 - 5.85 • • • • •
Insertion Loss 0.15 dB max. WR229 3.30 - 4.90 • • • • •
WR284 2.60 - 3.95 • • • • •
WR340 2.20 - 3.30 • • • • •
WR430 1.70 - 2.60 • • • • •
STANDARD FINISH: is electroless corrosion protection for the metal
surface. Non standard configurations and finishes (Silver, Nickel, WR650 1.12 - 1.70 • • • • •
Cadmium plating) are available upon request. Waveguide sizes
up to WR-650 available. Contact our sales department with your
requirements.

VER 1.0 October 06, 2009