Scribd
Upload
54 views

Model 2850: 1.5 Control Valve

The Model 2850 is a 1.5-inch control valve for water softeners and filters. It has a lead-free brass body and can handle tanks up to 30 inches in diameter. It provides adjustable 5-cycle control for backwash, brining, rinse, and service flows. Flow rates are 51 GPM continuous and 66 GPM peak, with a backwash rate of 49 GPM. It comes with options for meter initiation, hot water capability, and auxiliary switches.

Uploaded by

Wira Brata Samodra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Model 2850: 1.5 Control Valve

The Model 2850 is a 1.5-inch control valve for water softeners and filters. It has a lead-free brass body and can handle tanks up to 30 inches in diameter. It provides adjustable 5-cycle control for backwash, brining, rinse, and service flows. Flow rates are 51 GPM continuous and 66 GPM peak, with a backwash rate of 49 GPM. It comes with options for meter initiation, hot water capability, and auxiliary switches.

Uploaded by

Wira Brata Samodra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Model 2850 1.

5˝ Control Valve

Valve Specifications
Valve material Lead-free brass*
Inlet/Outlet 1-1/2˝ NPTF
Cycles 5

Flow Rates (50 psi Inlet) - Valve Alone


Continuous (15 psi drop) 51 GPM side mount
Peak (25 psi drop) 66 GPM side mount
▼ CV (flow at 1 psi drop) 13.2
FRONT WITHOUT COVER
Max. backwash (25 psi drop) 49 GPM

Regeneration
Downflow/Upflow Downflow only
Adjustable cycles Yes
▼

BACK WITHOUT COVER Time available Electromechanical: 164 minutes


SE: 0 - 99 minutes
ET: 0 - 999.9 minutes
Systemax: 0 - 999.9 minutes
Product Features
Meter Information
• Fully adjustable 5-cycle control delivers controlled upflow Meter accuracy range 0.7 - 40 GPM +/- 5% (1˝ )
backwash, downflow brining and slow rinse, rapid rinse, 1.5 - 75 GPM +/- 5% (1-1/2˝ )
timed brine refill and downflow service Meter capacity range (gal.)
• Time-tested hydraulically balanced piston, seal and 1˝ Standard 310 - 5,270
spacer design to pilot service flow and regeneration 1˝ Extended 1,150 - 26,350
1-1/2˝ Standard 625 - 10,625
• Solid lead-free brass valve body for superior strength
1-1/2˝ Extended 3,125 - 53,125
and durability
ET 1 - 9,999,999
• Backwash capacity handles tanks up to 30˝ diameter Systemax 1 - 99,999,999
• 1-1/2˝ top mount control valve ideal for smaller size
commercial/industrial applications Dimensions
Distributor pilot 1.9˝ O.D. (1.5˝ pipe)
• Consistent brining regardless of salt levels with timed Drain line 1˝ NPTM
brine refills Brine line 3/8˝ & 1/2˝
• Choice of 7 or 12 day clock, manual or meter Mounting base 4˝- 8 UN
• Continuous flow rate of 51 GPM with a backwash of Height from top of tank 6-1/2˝
49 GPM
Typical Applications
• Ideal for filter applications Water softener 10˝-30˝ diameter
Iron filter 10˝-24˝ diameter
Options Sediment filter 10˝-24˝ diameter
• Meter initiated regeneration • Hot water (time clock Carbon filter 10˝-24˝ diameter
180°F; metered valve Neutralizing filter 10˝-24˝ diameter
• Backwash filter
150°F) Additional Information
• No hard water bypass piston
• Manual operation Injector brine system 3/8˝ - 1600, 3/8˝ - 1650, 1/2˝ - 1700
• Environmental cover
• Service valve operator Electrical rating 24 v, 110 v, 220 v - 50 Hz, 60 Hz
• Electronic timer, ET or Max VA 72
Systemax • Auxiliary switch
Estimated shipping weight Time clock: 19 lbs.
• Side mount Metered valve: 27 lbs.
Pressure Hydrostatic: 300 psi
Working: 20 - 125 psi
Temperature 34° - 110° F

*As defined in the Safe Drinking Water Act.

You might also like