Scribd
Upload
330 views6 pages

Wall Footing

This document provides details of the stability check and design of a wall foundation for a centrifuge building. It includes calculations of loads acting on the wall from the soil, water tank, and self-weight. The overturning moment at the base is calculated to be 197 kN-m2. The footing is designed to have a thickness of 0.35m at the wall face and 0.2m at the edges, with a width of 2.05m. Reinforcement is designed for the heel and toe slabs, with 12mm diameter tor steel provided at 200mm spacing.

Uploaded by

samir bendre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
330 views6 pages

Wall Footing

This document provides details of the stability check and design of a wall foundation for a centrifuge building. It includes calculations of loads acting on the wall from the soil, water tank, and self-weight. The overturning moment at the base is calculated to be 197 kN-m2. The footing is designed to have a thickness of 0.35m at the wall face and 0.2m at the edges, with a width of 2.05m. Reinforcement is designed for the heel and toe slabs, with 12mm diameter tor steel provided at 200mm spacing.

Uploaded by

samir bendre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

PROJECT Utility Development and Management Nadaprabhu Kempegowda Layout

UNIT Centrifuge Building STP ZONE 7

TITLE Wall Foundation

STABILITY CHECK

DIAGRAM
w8

w6
w9

ORIGIN O w4 w3
w5 w2 w1

S.B.C OF SOIL 150 kN/m2 LENGTH 1m

DENSITY OF SOIL 18 kN/m3 FY 500 N/mm2

DENSITY OF CONCRETE 25 kN/m3 FCK 35 N/mm2

WIDTH OF WALL AT BASE 0.25 m

WIDTH OF WALL AT TOP 0.25 m

WIDTH OF FOOTING
0.9 m
NEAR TANK FACE
WIDTH OF FOOTING
0.9 m
NEAR SOIL FACE
TOTAL HEIGHT OF WALL
5m
ABOVE BASE SLAB

THICKNESS OF FOOTING
0.2 m
AT THE TANK EDGE
THICKNESS OF FOOTING
0.2 m
AT THE SOIL EDGE
THICKNESS OF FOOTING
0.35 m THK(MM) 350
AT FACE OF WALL

HEIGHT OF WATER INSIDE TANK 5.84 m

HEIGHT OF SOIL ON EARTH SIDE 1.5 m

BASE WIDTH 2.05 m

NET SAFE BEARING CAPACITY OF SOIL 150 kN/m2

TOP OF FOOTING BELOW FGL 1.5 m

STABILITY CHECK

CALCULATING MOMENT ABOUT POINT `O


DIST
LENGTH BREADTH DENSITY LOAD FROM MOMENT
S.NO DEPTH (m) TRI/REC REMARKS
(m) (m) (kN/m3) (kN) ORIGIN (kN-m)
(m)
W1 1 0.9 0.25 25 TRIANGLE 2.8125 1.447 4.069688

W2 1 0.25 0.35 25 2.1875 1.025 2.242188

W3 1 0.9 0.05 25 1.125 1.6 1.8

W4 1 0.9 0.15 25 TRIANGLE 1.6875 0.6 1.0125

W5 1 0.9 0.2 25 4.5 0.45 2.025

W6 1 0.9 5.84 10 52.56 1.6 84.096


soil
W7 1 0.9 1.5 18 1.2 0
load
W8 1 0.25 5 25 31.25 1.025 32.03125

W9 1 0 2.85 25 TRIANGLE 0 0.9 0

W10 1 25 0 0

W11 1 25 0 0

W12 1 25 0 0

W13 1 25 0 0

W14 1 25 0 0

W15 1 25 0 0

P 96.12 RM 127.28

DESIGN OF FOOTING

OVERTURNING MOMENT AT THE BASE OF THE WALL 197.185 kN/m2


SIZE OF THE FOOTING

PROJECTION OF FOOTING BEYOND WALL ON EARTH 0.9 m

PROJECTION OF FOOTING BEYOND WALL ON TANK SIDE 0.9 m

THICKNESS OF THE WALL 0.35 m

THICKNESS OF FOOTING AT THE FACE OF THE WALL ON TANK SIDE 0.35 m

THICKNESS OF FOOTING AT THE FACE OF THE WALL ON EARTH SIDE 0.35 m

THICKNESS OF FOOTING AT THE EDGE ON EARTH SIDE 0.2 m

THICKNESS OF FOOTING AT THE EDGE ON TANK SIDE 0.2 m

TOTAL HEIGHT OF WALL 5m

TOTAL HEIGHT OF WATER IN TANK 5.84 m

HEIGHT OF PCC ON TANK SIDE 0m

HEIGHT OF SOIL ON EARTH SIDE 1.5 m

TOTAL WIDTH OF FOOTING 2.05 m

OTM ACTING AT THE BASE OF THE FOOTING 197.18 kN/m2

MAX PRESSURE ACTING AT BASE NEAR TOE SIDE 87.7831

MIN PRESSURE ACTING AT BASE NEAR HEEL SIDE 5.99249

LOADS ON HEEL

SELF WEIGHT OF HEEL SLAB 6.875 kN

WEIGHT OF WATER ON HEEL SLAB 58.984 kN

TOTAL DOWNWARD LOAD ON HEEL SLAB 65.859 kN

LOADS ON TOE

SELF WEIGHT OF TOE SLAB 6.875 kN

WEIGHT OF SOIL ON TOE SLAB 27 kN

SURCHARGE LOAD 0 kN

TOTAL DOWNWARD LOAD ON TOE SLAB 33.875 kN

DESIGN OF HEEL SLAB

BENDING MOMENT ABOUT AN AXIS 9.779786 KN-M

AREA OF STEEL REQUIRED 64.43664 mm2


DESIGN OF TOE SLAB

BENDING MOMENT ABOUT AN AXIS 16.55902 KN-M

AREA OF STEEL REQUIRED 109.3041 MM2

DISTRIBUTION STEEL

MINIMUM PERCENTAGE OF STEEL REQUIRED 0.35% 612.5

PROVIDE 12MM DIA TOR STEEL AT A SPACING 200

AREA OF STEEL PROVIDED 753.98 SQMM

SUMMARY OF REINFORCEMENT

MAIN REINFORCEMENT DISTRIBUTION REINFORCEMENT

HEEL SLABOTTOM 12mm @ 150mm c/c 12mm @ 150mm c/c

TOP 12mm @ 150mm c/c 12mm @ 150mm c/c

TOE SLABBOTTOM 12mm @ 150mm c/c 12mm @ 150mm c/c

TOP 12mm @ 150mm c/c 12mm @ 150mm c/c


DIAGRAM
w8

w6
w9

ORIGIN O w4 w3
w5 w2 w1

You might also like