Scribd
Upload
394 views

Important Questions and Answers - Robot Drive Systems and End Effectors PDF

Uploaded by

vicky t
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
394 views

Important Questions and Answers - Robot Drive Systems and End Effectors PDF

Uploaded by

vicky t
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

5/17/2020 Important Questions and Answers: Robot Drive Systems and End Effectors

Home (http://www.brainkart.com) | | Robotics (http://www.brainkart.com/subject/Robotics_56/) | Important


Questions and Answers: Robot Drive Systems and End Effectors

 Prev Page (http://www.brainkart.com/article/Working-of-a-stepper-motor_5145/)

Next Page  (http://www.brainkart.com/article/Introduction-to-Sensors_5147/)

Chapter: Mechanical - Robotics - Robot Drive Systems and End Effectors

| Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail |

Important Questions and Answers: Robot Drive Systems and End


Effectors
Mechanical - Robotics - Robot Drive Systems and End Effectors

1. Define end effectors.

End effector is a device that is attached to the end of the wrist arm to perform specific
task. It is also called as gripper.

2. Give some examples of Robot End Effector.

Gripper

Tools

Welding equipments

End of arm Tooling (EOAT)

3. Difference between internal grippers and external grippers.

In internal grippers, the finger pads are mounted on the inside of the fingers. This
mounting allows the pads to fit into the inside diameter of the part it must lift. The pads
are pressed against the inside wall of the part.

www.brainkart.com/article/Important-Questions-and-Answers--Robot-Drive-Systems-and-End-Effectors_5146/ 1/5
5/17/2020 Important Questions and Answers: Robot Drive Systems and End Effectors

An external gripper is designed so that the finger pads press against the outside of the
component. The exterior surface of the grips had closed fingers.

4. Types of Mechanical Grippers.

Linkage actuation gripper

Gear and rack actuation gripper

Cam actuated gripper

Screw actuated gripper

5. List any two limitations of magnetic grippers

Residual magnetism

Side slippage

More than one sheet will be lifted by the magnet from a stack

6. List any four important factors to be considered in the selection and design of
grippers.

The gripper must have the ability to reach the surface of a work part.

The change in work part size must be accounted for providing accurate positioning.

During machining operations, there will be a change in the work part size. As a result,
the gripper must be designed to hold a work part even when the size is varied.

The gripper must not create any sort of distort and scratch in the fragile work parts.

www.brainkart.com/article/Important-Questions-and-Answers--Robot-Drive-Systems-and-End-Effectors_5146/ 2/5
5/17/2020 Important Questions and Answers: Robot Drive Systems and End Effectors

7. Give some examples of tool as robot End effector.

Spot Welding Tools

Arc welding Torch

Spray painting nozzle

Water jet cutting tool

8. Name some feedback devices used in robotics.

Potentiometer

Resolver

Encoder

9. Types of encoders?

(a) Linear encoder


(b) Rotary encoder

(i) Absolute encoder

(ii) Incremental encoder

10. Types of Drive systems used in Robots.

Electric motors like: Servomotors, Stepper motors

Hydraulic actuators
www.brainkart.com/article/Important-Questions-and-Answers--Robot-Drive-Systems-and-End-Effectors_5146/ 3/5
5/17/2020 Important Questions and Answers: Robot Drive Systems and End Effectors

Pneumatic actuators

11. Characteristics of actuating systems.

Weight
Power-to-weight ratio
Operating Pressure
Stiffness Vs. Compliance

12. List any two unique features of a stepper motor.

Moves in known angle of rotation.

Position feedback is not necessary.

Rotation of the shaft by rotation of the magnetic field.

13. What is a RCC device? For what purpose is it used in a robot?

In robotics, a Remote Center Compliance, Remote Center of Compliance or RCC is a


mechanical device that facilitates automated assembly by preventing peg-like objects
from jamming when they are inserted into a hole with tight clearance. In a naive design
without an RCC, a robot might pick up a peg with its gripper, center the peg over the
hole and then push the peg along the axis of the hole.

 Prev Page (http://www.brainkart.com/article/Working-of-a-stepper-motor_5145/)

Next Page  (http://www.brainkart.com/article/Introduction-to-Sensors_5147/)

Study Material, Lecturing Notes, Assignment, Reference, Wiki description explanation, brief detail

 Prev Page (http://www.brainkart.com/article/Working-of-a-stepper-motor_5145/)

Next Page  (http://www.brainkart.com/article/Introduction-to-Sensors_5147/)

Related Topics

www.brainkart.com/article/Important-Questions-and-Answers--Robot-Drive-Systems-and-End-Effectors_5146/ 4/5
5/17/2020 Important Questions and Answers: Robot Drive Systems and End Effectors

Selection and design considerations in robot gripper (http://www.brainkart.com/article/Selection-and-


design-considerations-in-robot-gripper_5141/)
Mechanical drives system (http://www.brainkart.com/article/Mechanical-drives-system_5142/)
Pneumatic actuators system (http://www.brainkart.com/article/Pneumatic-actuators-system_5143/)
Various types of Gripper mechanisms (http://www.brainkart.com/article/Various-types-of-Gripper-
mechanisms_5144/)
Working of a stepper motor (http://www.brainkart.com/article/Working-of-a-stepper-motor_5145/)
Introduction to Sensors (http://www.brainkart.com/article/Introduction-to-Sensors_5147/)
Need of Sensors (http://www.brainkart.com/article/Need-of-Sensors_5148/)
Position Sensors (http://www.brainkart.com/article/Position-Sensors_5149/)
Proximity Sensor (http://www.brainkart.com/article/Proximity-Sensor_5150/)
Compliant geometry (http://www.brainkart.com/article/Compliant-geometry_5151/)
Slip sensing (http://www.brainkart.com/article/Slip-sensing_5152/)
Analog Frame Grabbers (http://www.brainkart.com/article/Analog-Frame-Grabbers_5153/)

Copyright © 2018-2020 BrainKart.com; All Rights Reserved. Developed by Therithal info, Chennai.

www.brainkart.com/article/Important-Questions-and-Answers--Robot-Drive-Systems-and-End-Effectors_5146/ 5/5

You might also like