Scribd
Upload
42 views1 page

Pipe Strap Support Near Bend - V1

The document provides specifications for securing pipes to walls using steel straps and bolts. Pipes up to 415mm in diameter will be secured using 12mm thick steel straps bolted to the wall with M20 bolts at 300mm centers on both sides of bends. For larger pipes, additional straps will be placed further from connections and bends. All bolts will be grade 8.8 and embedded at least 200mm into the wall.

Uploaded by

krishnakumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views1 page

Pipe Strap Support Near Bend - V1

The document provides specifications for securing pipes to walls using steel straps and bolts. Pipes up to 415mm in diameter will be secured using 12mm thick steel straps bolted to the wall with M20 bolts at 300mm centers on both sides of bends. For larger pipes, additional straps will be placed further from connections and bends. All bolts will be grade 8.8 and embedded at least 200mm into the wall.

Uploaded by

krishnakumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BOLT TO BE MIN.

150
12 THK 100 WIDE STRAPS AROUND THE PIPE FROM THE WALL EDGE
WITH 2 NO. M20 DIA BOLTS PROVIDED 300
ON EITHER SIDE OF BEND.
BOLT TO BE MIN. 150
4 NO. M20, 8.8 GRADE BOLTS AT
FROM THE WALL EDGE
300 C/C ON 2 ON EITHER SIDE OF
THE PIPE. MIN. EMBEDMENT 200
300 THK WALL
PIPE OF DIA UPTO 415

D
M20, 8.8 GRADE BOLTS DOWELLED USING 12 THK 400 WIDE STRAPS TO BE
HIT-HY-200 RESIN OR SIMILAR APPROVED PROVIDED AT DISTANCE D
PIPE OF DIA ABOVE 415
300 THK WALL (TYP.). MIN EMBEDMENT 200 (TYP.) FROM THE CONNECTION/BEND

12 THK 100 WIDE STRAPS AROUND


12 THK 100 WIDE STRAPS AROUND THE PIPE AT 2000 C/C (TYP.)
THE PIPE AT 2000 C/C (TYP.)

FOR PIPES ABOVE 415 DIA


FOR PIPES UPTO 415 DIA 90° BEND AND TEE CONNECTION
BENDS UPTO 45° NTS
NTS

12 THK 90 WIDE STRAPS AROUND


THE PIPE AT 2000 C/C (TYP.)
100 MIN. 150 MIN.

PFC 200x90x30 WELDED TO 300 THK WALL


16 THK 400x200 BASE PLATE

6mm THK FILLET WELD

2 NO. M20, 8.8 GRADE BOLTS DOWELLED USING


HIT-HY-200 RESIN OR SIMILAR APPROVED
(TYP.). MIN EMBEDMENT 100 (TYP.)

FOR 315 DIA PIPES


CONNECTED TO WALL
NTS

You might also like