Scribd
Upload
94 views

Implement and Steering System

Uploaded by

kiddrix gamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
94 views

Implement and Steering System

Uploaded by

kiddrix gamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

140M Motor Grader - All Wheel Drive D9G00001-UP (MACHINE) POWERED B...

Página 1 de 2

Shutdown SIS

Previous Screen

Product: MOTOR GRADER


Model: 140M MOTOR GRADER D9G
Configuration: 140M Motor Grader - All Wheel Drive D9G00001-UP
(MACHINE) POWERED BY C9 Engine

Systems Operation
140M and 160M Motor Graders Hydraulic and Steering System
Media Number -RENR8469-08 Publication Date -01/11/2009 Date Updated -30/11/2009

i03772568

Implement and Steering System


SMCS - 4300; 5050-II

Illustration 1 g01108413

(1) Solenoid

(2) Solenoid

(3) Secondary steering pilot valve

(4) Steering control valve

(5) Pilot filter

(6) Implement control valve

(7) Implement control valve

(8) Pilot manifold

(9) Shuttle valve

(10) Piston pump

(11) Return manifold

(12) Return manifold

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 25/08/2010
140M Motor Grader - All Wheel Drive D9G00001-UP (MACHINE) POWERED B... Página 2 de 2

(13) Oil filter

At low pressure standby, the implement circuit and the steering circuit are not active. Piston pump (10) pumps oil to pilot manifold (8) . Manifold (8) will direct pilot
oil into the pilot system when the implement lockout switch is on. Pump (10) also pumps oil to steering control valve (4) . After pump oil has satisfied the steering
system, steering control valve (4) will direct pump oil to implement control valve (7) and implement control valve (6) . When the requirements for the implement
system and the steering system are met, pump (10) will destroke.

When the implement system or the steering system is used, signal oil will flow to shuttle valve (9) . Shuttle valve (9) will shift. Shuttle valve (9) will direct the
highest signal pressure to the pump. Signal oil will upstroke the pump.

Oil returns to the hydraulic tank through two manifolds. Manifold (11) and manifold (12) will direct all return oil to oil filter (13) . Oil filter (13) will remove any
debris in the oil before directing the oil to the hydraulic tank.

Copyright 1993 - 2010 Caterpillar Inc. Wed Aug 25 12:00:18 EST 2010
All Rights Reserved.
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 25/08/2010

You might also like