See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/275346726

Performance-based Design: An Approach towards Safer, Reliable Structures

Article · February 2015

CITATIONS READS

0 2,104

1 author:

Naveed Anwar
Asian Institute of Technology
142 PUBLICATIONS   59 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Seismic Performance Evaluation of High-rise Buildings with RC Flag Wall Systems View project

Post Earthquake Re-construction Project View project

All content following this page was uploaded by Naveed Anwar on 24 April 2015.

The user has requested enhancement of the downloaded file.

 Performance-based
Design: An Approach
towards Safer, Reliable
Structures
By Naveed Anwar

Trends show the number of buildings and building height

to be increasing, increasing the need for more skilled
engineers, equipped with better tools to evaluate and
guarantee the safety and performance of such buildings.

58 Technology | February 2015

Performance-based Design:
An Approach towards Safer, Reliable
Structures
On Building Safety Intent and Justification for PBD

A
sia’s recent dominance of the tall-building The Los Angeles Tall Buildings Structural Design Council
industry is evident from the 2014 annual report (LATBSDC) provides several reasons justifying why PBD is
of the Council on Tall Buildings and Urban Habitat a valid, and preferable option, compared to the traditional
(CTBUH), accounting 74 of the 97 tall buildings completed code based design, both for tall buildings and other struc-
in 2014, or 76%, were in Asia. Trends show the number of tures:
buildings and building height to be increasing, increasing
the need for more skilled engineers, equipped with better • Code provisions are intended to provide a
tools to evaluate and guarantee the safety and perfor- minimum level of safety for engineered buildings.
mance of such buildings. The code prescriptive provisions are intended to
provide safe design criteria for all types of buildings,
Undeniably, as the tall buildings and complex structures ranging from small one and two-story dwellings Author:
are becoming more prevalent in our world today, the to the tallest structures. As a result of this broad
concern for the safety of the public from various natural intended applicability, the provisions contain many
and man made hazards is becoming more relevant. So requirements that are not specifically applicable
when clients and users of the buildings ask a structural to tall buildings and which may result in designs
engineer, an apparently simple question “Is my structure that are less than optimal, both from a cost and Naveed Anwar, Ph.D.
safe?”, engineers are at odds to respond to this explicitly. safety perspective. Executive Director,
Generally, the structural engineers follow the prescriptive AIT Consulting
provisions of the building and design codes, and proba- Director, Asian Center
for Engineering Computations
bly the best answer they could offer is that “I am not sure, and Software (ACECOMS),
but I have designed this structure according the building Affiliate Faculty,
code!” Obviously, such a response may not be sufficient, Structural Engineering,
Asian Institute of Technology
or acceptable, but unless clearer and more refined design
approaches and methodologies are used, this may be the
only choice. The main reasons why an explicit answer is not
possible, are, first, the question itself is not well-defined.
It does not explain what a “safe design” is; and if it is safe
against what effects, and what level of safety is required.
It also does not allow the designer to carry out a clear-cut
understanding and evaluation of the “strength” of the struc-
ture that is not bound by typical simplifications, arbitrary
factors, and prescriptive limits.

The development and recent advancements in the

Performance-based Design approach (PBD) provides an
alternative, as well a progression to more explicit evaluation PBD guarantees
of the safety and reliability of structures for various hazards,
1. Safer buildings with better performance
specially earthquakes, and progressive collapse scenarios.
PBD gives the opportunity to clearly define the levels of 2. Verification of the performance of the
hazards to be designed against, with the corresponding building
performance to be achieved, and evaluate the cost impli- 3. More cost-effective buildings
cations in the process. This essentially allows the clients,
4. Performance matching depending on
building owners, and team carrying out the PBD to eval-
requirements of the building
uate the explicit risks at the site, consider the purpose and
usage of the building, and set the design for appropriate
performance levels, in line with international guidelines
and practices.
Technology | February 2015 59
 • Almost all design codes have traditionally permitted the use LATBSDC also lists several guidelines that offer a number of
of alternative analysis and design methods which can be advantages for opting for PBD when carrying out seismic
justified based on well-established principles of mechan- design of buildings:
ics and/or supported by convincing laboratory test results.
For example, section 104.11 of 2012 edition of International • More reliable attainment of intended seismic perfor-
Building Code (2012 IBC) and the same section in the 2013 mance
California Building Code (2013 CBC) permit the application • Reduced construction cost
of alternative lateral-force procedures using rational anal-
• Elimination of some code prescriptive design
ysis based on well-established but complex principles of
requirements
mechanics in lieu of prescriptive code provisions.
• Accommodation of architectural features that may
not otherwise be attainable

• Use of innovative structural systems and materials

GUIDELINES FOR IMPLEMENTING PBD
Design Team Qualifications
The appropriate implementation of PBD process requires
1. American Society of Civil Engineers (2013) ASCE Standard.
an in-depth understanding of ground-shaking hazards,
Seismic Evaluation of Existing Buildings. ASCE/SEI 41-13. structural materials behavior, and nonlinear dynamic
Virginia, United States. structural response, specifically knowledge of:

• seismic hazard analysis and selection and scaling of

2. Applied Technology Council, Pacific Earthquake Engineering
ground motions
Research Center (2010) Modeling and acceptance criteria for
• nonlinear dynamic behavior of structures and foun-
seismic design and analysis of tall buildings. PEER/ATC 72-1.
dation systems including construction of mathe-
Redwood City, California, United States.
matical models capable of reliable prediction of
such behavior with understanding and skills in the
3. Council on Tall Buildings and Urban Habitat (2008) Recom- use of appropriate software tools
mendations for the Seismic Design of High-rise Buildings - • understanding of capacity design principles and
A Consensus Document - CTBUH Seismic Working Group. detailing of elements to resist cyclic inelastic
Chicago, Illinois, United States. demands, and assessment of element strength,
deformation, and deterioration of characteristics
under cyclic inelastic loading
4. Applied Technology Council (ATC-33 Project) (1997) NEH-
RP Guidelines for the Seismic Rehabilitation of Buildings - These knowledge and skill sets are generally not impart-
Issued by Federal Emergency Management Agency (FEMA) ed to structural engineers in a typical undergraduate civil
in furtherance of the Decade for Natural Disaster Reduction. engineering program. These are either acquired through
FEMA 273 and 274. Washington, D.C., United States. a specialized master’s degree programs, or through exten-
sive training and experience in PBD applications under the
supervision of experts. Also, it is uncommon that a single
5. Los Angeles Tall Buildings Structural Design Council (2014) person can possess all these abilities, thus performing PBD
An Alternative Procedure for Seismic Analysis and Design of requires a specialized team of engineers to carry out the
Tall Buildings Located in the Los Angeles Region – A Consen- process. To increase reliability, the use of the PDB approach
sus Document. Los Angeles, California, United States. on a project often requires that a third party, also special-
ized in PBD, carry out a review of the procedures to be
followed, hazard and performance criteria that are set to
6. Pacific Earthquake Engineering Research Center (PEER)
be used, and the final outcome.
(2010) Guidelines for Performance-Based Seismic Design
of Tall Buildings. University of California, Berkeley, California,
The willingness of building developers and clients to
United States. engage primary structural engineers, PBD specialists and
reviewers clearly indicate that the advantages of using
PBD are becoming evident both in terms of enhanced per-
formance and public safety and better cost-effectiveness.

60 Technology | February 2015

As shown in the figure, in a typical scenario, the client,
architect, structural engineers using code-based design,
specialized PBD consultants, and PBD peer reviewers joint-
Architect
ly work to enhance the performance and reliability of the
structure, while maintaining cost effectiveness.

AIT’s Role in Development Structural Engineering

and Application of PBD
The Asian Institute of Technology (AIT) has all of the ingre-
dients to develop and apply PBD approaches. First, AIT’s PBD Specialist
master and doctoral academic programs in structural
engineering have traditionally focused on computational
mechanics, development of finite element methods, and Site Specific
Client
software tools and their application, a necessary ingredi- Consultant
ent of the advanced analysis and simulations needed for
PBD. When combined with extensive courses and research
capability in structural dynamics, earthquake and wind PBD Reviewer
engineering, advanced concrete technology and
mechanics, learning tall building design provides a
complete knowledge and skill set to students needed to
undertake both research and application of advanced
analysis and design, an essential part of PBD. More than
half of the master and doctoral thesis research in the past
decade were conducted, both experimentally and com- Performance-based Design Team and Process
putationally, on various aspects leading to greater under-
standing and development of the procedures and meth-
odologies for advanced design procedures, including PBD. AIT, through its acedemic programs, various centers and
partners, is committed to lead the development and
With the recent establishment of AIT Consulting (AITC), application of new technologies to provide safer and more
the practical application of these capabilities and applica- reliable structures for the safety of the buildings, infrastruc-
tions to real-life, large projects has added another dimen- ture and most importantly, people.
sion, which in addition to providing PBD related expertise
and services to the industry, feeds back to the academic
programs, and research. These capabilities and involve- With contributions from Thaung Htut Aung, Deputy Director, AIT Consulting.
ment are highlighted by deep regional experience in Asia.
To date, 67 tall buildings in Asia were evaluated by using
the PBD approach, many of which were further reviewed
by third-party experts based in the United States. This
advanced and highly specialized work is carried out by
AITC team of adept structural engineers, advised by the AIT
faculty experts, such as the Prof. Pennung Warnitchai.

AIT Consulting, together with Asian Center for Engineering

Computations and Software (ACECOMS), also based at AIT,
and its close partners such as Computers and Structures
Inc., (CSI), United States, the developers of the primary soft-
ware used for PBD, have conducted several regional events,
highlighting the developmemts and advantages of using
PBD. Recently the president of CSI, Mr. Ashraf Habibullah,
visited Bangkok and Manila to speak in such events.

Technology | February 2015 61

 67 PBD
Tall Buildings Performance-based Design
Tall Buildings and PBD at AIT Consulting

HEIGHT

+ +
...

12,000
Combined height of buildings evaluated
> 8,848 m
Mt. Everest

Floor AREA

+ + ...
5 km2
Combined floor area of buildings evaluated
> Monaco + Male + Vatican

WEIGHT
x 60

+ + ...

5,850,000 tons > USS Gerald Ford

Combined weight of buildings evaluated Supercarrier

62 Technology | February 2015

View publication stats