Scribd
Upload
178 views

RPT E3

Uploaded by

miturra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
178 views

RPT E3

Uploaded by

miturra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RPT-E3

Description Network Repeater


The ARCNET Repeater Module (RPT-E3) is an optional
component of the E3 Series® Expandable Emergency
Evacuation System. It allows the following remotable, E3
Series sub-assemblies to connect to the Broadband net-
work from remote locations:
• ILI-MB-E3
• NGA

The RPT-E3 is available for use in two versions:


• RPT-E3-FO
• RPT-E3-UTP RPT-E3

RPT-E3-UTP connects to the network using unshielded, Features


twisted-pair, copper wire only.
• Listed under UL Standard 864, 9th Edition
RPT-E3-FO communicates to the network using either • Provides the capability for remotable E3 Series
62.5/125 multi-mode fiber-optic cable or copper, sub-assemblies to connect in Styles 4 or 7
unshielded, twisted-pair wire.
configurations
• “FO” option allows either 62.5/125 fiber-optic cable or
Installation
copper, unshielded, twisted-pair wire
The RPT-E3 is adaptable for installation in standard E3 • “UTP” option available for unshielded, twisted-pair
Series System cabinets. Typically, the RPT-E3 module is copper wire only
mounted on standoffs on top of the right side of the ILI-MB- • 625K baud ARCNET Repeater
E3 module. Either unit can be easily connected to the
backbox or sub-assembly plate depending on the cabinet
model. Ordering Information
For instructions on installing the RPT-E3, refer to the E3
Model Description
Series® Expandable Emergency Evacuation Installation/
Operating Manual, Part Number: 9000-0574 or the RPT-E3 RPT-E3-UTP Network Repeaters, unshielded, twisted-pair
RPT-E3-FO Network Repeater, fiber-optic
Installation Instructions, Part Number: 9000-0580.

Specifications
Operating Voltage: 24 VDC FWR
(from PM-9 power supply)
Operating Current: 0.013 amp.
An ISO 9000-2000 Company
SIGNALING
Operating Temperature: 32° to 120° F (0° to 49° C)
Relative Humidity: 0 to 93%, non-condensing at FM City of

90° F (32° C) MEA Chicago


Approved
City of
Denver
APPROVED Approved
E3 Series® and NetSOLO® are registered trademarks of Honeywell International Inc.
Class 1 Approved
S1869 3025415 231-06-E 7165-0694:268 Class 2
7165-0694:269 High Rise

GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 by Honeywell International Inc. All rights reserved. www.gamewell-fci.com 9020-0609 Rev. e1 page 1 of 1

You might also like