Data sheet 6GK7343-1EX30-0XE0

Product type designation CP 343-1

Communications processor CP 343-1 for connection of SIMATIC S7-
300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO
controller or PROFINET IO device, integrated 2-port switch ERTEC
200, S7 communication, fetch/write, send/receive with and without
RFC1006, Multicast DHCP, NTC- CPU Sync, diagnostic, initialization
via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

Transfer rate
Transfer rate
● at the 1st interface 10 ... 100 Mbit/s

Interfaces
Number of interfaces / acc. to Industrial Ethernet 2
Number of electrical connections
● at the 1st interface / acc. to Industrial Ethernet 2
● for power supply 1
Type of electrical connection
● of Industrial Ethernet interface RJ45 port
● at the 1st interface / acc. to Industrial Ethernet RJ45 port
Type of electrical connection
● for power supply 2-pole plugable terminal block

Supply voltage, current consumption, power loss

Type of voltage / of the supply voltage DC
Supply voltage / 1 / from backplane bus 5 V
Supply voltage 24 V

6GK7343-1EX30-0XE0 Subject to change without notice

Page 1/5 04/07/2020 © Copyright Siemens
 Supply voltage / external 24 V
Supply voltage / external / at DC / Rated value 24 V
Relative positive tolerance / at DC / at 24 V 20 %
Relative negative tolerance / at DC / at 24 V 15 %
Consumed current
● from backplane bus / at DC / at 5 V / typical 0.2 A
● from external supply voltage / at DC / at 24 V / 0.16 A
typical
● from external supply voltage / at DC / at 24 V / 0.2 A
maximum
Power loss [W] 5.8 W

Ambient conditions
Ambient temperature
● for vertical installation / during operation 0 ... 40 °C
● for horizontally arranged busbars / during 0 ... 60 °C
operation
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
Relative humidity
● at 25 °C / without condensation / during 95 %
operation / maximum
Protection class IP IP20

Design, dimensions and weights

Module format Compact module S7-300 single width
Width 40 mm
Height 125 mm
Depth 120 mm
Net weight 0.22 kg
Mounting type
● S7-300 rail mounting Yes

Performance data / open communication

Number of possible connections / for open 16
communication / by means of SEND/RECEIVE
blocks / maximum
Amount of data
● as user data per ISO connection / for open 8 Kibyte
communication / by means of SEND/RECEIVE
blocks / maximum
● as user data per ISO on TCP connection / for 8 Kibyte
open communication / by means of
SEND/RECEIVE blocks / maximum

6GK7343-1EX30-0XE0 Subject to change without notice

Page 2/5 04/07/2020 © Copyright Siemens
 ● as user data per TCP connection / for open 8 Kibyte
communication / by means of SEND/RECEIVE
blocks / maximum
● as user data per UDP connection / for open IE 2 Kibyte
communication / by means of SEND/RECEIVE
blocks / maximum
Number of Multicast stations 16

Performance data / S7 communication

Number of possible connections / for S7
communication
● maximum 16

Performance data / multi-protocol mode

Number of active connections / with multi-protocol 32
mode

Performance data / PROFINET communication / as PN IO controller

Number of PN IO devices / on PROFINET IO 32
controller / usable / total
Number of external PN IO lines / with PROFINET / 1
per rack
Amount of data
● as user data for input variables / as PROFINET 1 Kibyte
IO controller / maximum
● as user data for input variables / as PROFINET 1 Kibyte
IO controller / maximum
● as user data for input variables per PN IO 1433 byte
device / as PROFINET IO controller / maximum
● as user data for output variables per PN IO 1433 byte
device / as PROFINET IO controller / maximum
● as user data for input variables per PN IO 240 byte
device / for each sub-module as PROFINET IO
controller / maximum
● as user data for output variables per PN IO 240 byte
device / for each sub-module as PROFINET IO
controller / maximum

Performance data / PROFINET communication / as PN IO device

Product function / PROFINET IO device Yes
Amount of data
● as user data for input variables / as PROFINET 512 byte
IO device / maximum
● as user data for input variables / as PROFINET 512 byte
IO device / maximum
● as user data for input variables / for each sub- 240 byte
module as PROFINET IO device

6GK7343-1EX30-0XE0 Subject to change without notice

Page 3/5 04/07/2020 © Copyright Siemens
 ● as user data for input variables / for each sub- 240 byte
module as PROFINET IO device
● as user data for the consistency area for each 240 byte
sub-module
Number of submodules / per PROFINET IO-Device 32

Performance data / telecontrol

Protocol / is supported
● TCP/IP Yes

Product functions / management, configuration, engineering

Product function / MIB support Yes
Protocol / is supported
● SNMP v1 Yes
● DCP Yes
● LLDP Yes
Configuration software
● required STEP 7 V5.4 SP2 or higher / STEP 7 Professional V11 (TIA
Portal) or higher
Identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 – higher-level designation/location Yes
designation

Product functions / Diagnostics

Product function / Web-based diagnostics Yes

Product functions / Switch

Product feature / Switch Yes
Product function
● switch-managed No
● with IRT / PROFINET IO switch Yes
● Configuration with STEP 7 Yes

Product functions / redundancy

Product function
● Ring redundancy Yes
● Redundancy manager No
Protocol / is supported / Media Redundancy Protocol Yes
(MRP)

Product functions / Security

Product function
● password protection for Web applications No
● ACL - IP-based Yes
● ACL - IP-based for PLC/routing No
● switch-off of non-required services Yes

6GK7343-1EX30-0XE0 Subject to change without notice

Page 4/5 04/07/2020 © Copyright Siemens
 ● Blocking of communication via physical ports Yes
● log file for unauthorized access No

Product functions / time

Product function / SICLOCK support Yes
Product function / pass on time synchronization Yes
Protocol / is supported
● NTP Yes

Further information / Internet-Links

Internet-Link
● to website: Selector SIMATIC NET http://www.siemens.com/snst
SELECTION TOOL
● to website: Industrial communication http://www.siemens.com/simatic-net

● to website: Industry Mall https://mall.industry.siemens.com

● to website: Information and Download Center http://www.siemens.com/industry/infocenter

● to website: Image database http://automation.siemens.com/bilddb

● to website: CAx Download Manager http://www.siemens.com/cax

● to website: Industry Online Support https://support.industry.siemens.com

Security information
Security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important
components in a holistic industrial security concept. With this in
mind, Siemens’ products and solutions undergo continuous
development. Siemens recommends strongly that you regularly
check for product updates. For the secure operation of Siemens
products and solutions, it is necessary to take suitable preventive
action(e.g. cell protection concept) and integrate each component
into a holistic, state-of-the-art industrial security concept. Third-
party products that may be in use should also be considered. For
more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific
newsletter. For more information, visit
http://support.automation.siemens.com. (V3.4)

last modified: 03/11/2020

6GK7343-1EX30-0XE0 Subject to change without notice

Page 5/5 04/07/2020 © Copyright Siemens